Motors
-
26 RPM 45 VAC GEARMOTOR. Removed from service. Inline parallel shaft gearmotor. Mounting holes are drilled and tapped. Specifications; RPM 26, Voltage 45 VAC, Amps 0.600 (no load), Rotation CW, Duty Int. 4 hole face mount on 1-9/16" x 1-5/8" centers. Shaft 3/16" diam. x 5-1/4" w/ 10-32 threaded end. Overall Size 1-1/4" x 2-1/2" x 4-7/8" weighs 2 lbs.
-
CANON SA32-T10S1A CASSETTE DRIVE 12VDC MOTOR
This motor is 1-5/16" dia x 1" high. The shaft has a dual belt drive 3/8" dia pulley. Other numbers also appearing on the motor are; CM32-02401 and 5YGF. Made in Japan. Removed from brand new automobile cassette drive mechanisms.
-
MAGNETIC HEAD ASSEMBLY WITH STEPPER MOTOR ADJUSTER
1" diameter stepper motor rotates worm gear to raise and lower a magnetic head assembly, probably from an audio or data tape drive. The worm gear part of this device might be useful for other applications. The motor is a 6 wire, unipolar stepper. The travel of the worm gear is about 0.5". Mounted on a metal assembly 3.1" x 3.3."
-
MABUCHI model RS-555PH-3255 (RS555PH3255). What a find.... Originally designed to be installed in portable drills and printers. (Also works as a fine generator) This model features improved design to reduce external noise levels. Has "wrap around" magnetic shield. High torque 380.3 gm-cm with a stall-torque figure of 1360 gm-cm. An excellent find for the small or medium sized OEM who requires modest quantities of this quality product but cannot satisfy the manufacturer's demand for large quantity purchases. Hundreds of application in Robotics, the RC field etc. (shaft is 1/4 flat - stainless steel 1/8" dia). No load speed is 5500RPM - excellent for "gearing down" to provide ultra high torque for larger projects. 1-7/16" dia x 2-5/8" long. Flatted shaft is 1/2" long. 3/16" push on terminals. Check the spec sheet by clicking the "more info" icon. For a larger photo, click on the photo above. This unit features 5 pole construction for higher torque and power efficiency, anisotropic magnets, and coil specs of 55 turns of 32mm wire. We have tested this motor on one alkaline pencell and find that it will deliver useable torque at reduced RPM. Superb for school projects.
-
MERKLE-KORFF 12VDC GEAR MOTOR WITH CLUTCH
As pictured. The 12VDC motor is Merkle-Korff Industries. The motor is approx 1-1/2" dia. x approx 2-3/8"L. The gearbox is approx 5-1/2" L x approx 1" thick x approx 3" W. The clutch mechanisim as pictured is 3" dia. x approx 1-3/4" thick. The clutch and motor each have two wires. Inventory shipped may vary slightly from this description as the inventory may be mixed but units will be similar. Little else is known about this assembly. Removed from used equipment. Good condition.
-
SIEMENS POT CORE B65937-A0000-X022
We have 9500 pieces available. Take the whole lot at .19 each OBO
-
Determine surplus stepper motor specs using simple easy to build test equipment. Design and build microcontroller-based control systems. (Flow charts and code examples included) Design and build stepper motor driver circuits. Analyze the mechanical characteristics of stepper motor driven devices. This book is full of experiments, circuits and code.
-
SIEMENS BFP405 TRANSISTOR, NPN, SILICON, RF, SMT SOT-323
SIEMENS BFP405 Transistor, NPN, silicon, RF, SMT SOT-323
-
MABUCHI 1.5VDC TO 3VDC MINI MOTOR - ATTEN R/C FANATICS... THIS IS A GREAT UNIT!
Mabuchi # FF-N20PN. Miniature 1.5 to 3 Volt DC motor. Ideal for models and radio control applications where small size is important. No load rating: 15,800 RPM @ 2.4 V, 96 mA. Length (excluding shaft), 0.654” long x 0.47” x 0.39”. Shaft is 0.039”(1mm) diameter x 0.13” long. Solder-loop terminals.
-
DC TO PULSE WIDTH CONVERTER/DC MOTOR CONTROLLER KIT
Easy to assemble kit - Velleman # k8004. Ideal for accurate control of DC motors, lighting levels and small heaters as well as other applications. The cirtuit converts DC voltage into a series of pulses, the duration of which is directly proportional to the voltage. Minimizes power loss in the control circuit. Overload and short circuit protection. Input Voltage: 2.5 -25 VCD. Maximum output 8-35 Vdc, 6.5 Amps.
-
LINEAR ACTUATOR FOR AUTO DOOR LOCK
12VDC motor drive actuator for automotive door locks. Nylon plunger moves 0.75". Push or pull, depending on polarity. Includes mounting hardware and a 10" metal extension rod which fits through the hole in the end of the plunger. Overall dimensions of the actuator assembly in retracted state is 8.42" x 2.35" x 1.15". Rubber boot protects against moisture and dust. pigtail leads.
-
7,476pcs of Zhongshan E. M. & A Gen-115VDC 60 Hz 0.9A - 15W 1550 RPM CLA TPL 199 # E18093A available. These motors are equivalent to the Grainger exhaust motor #18, or the Fasco # D120. These units are the size of a coffee mug and are counter clockwise rotation. The original FOB factory price is $23.95US per unit. Application for this motor seems to be mostly for bathroom exhaust fans. Offers considered for min. 2,000 lot.
-
HIGH SPEED 5VDC MINIATURE CAMERA MOTORS
5 VDC operation, model SM1230A (13,000 rpm @ 100ma - no load). Under load: torque is 8g.cm at 360ma (8800RM). Used originally in automatic cameras (probably used for film winding and telephoto zooming). Ultra compact - only 12mm diameter x 30mm length with approx shaft diameter of 1.5mm. Ideal for micro products, mini robotics, etc. Shipped FOB Korea warehouse. Also available: 30,000 pcs model SM1215C, zooming motor for camera 4800 pcs Mabuchi motor RF-N60CA-05744A
-
MITSUMI 7.5 DEGREE STEPPER MOTOR
Mitsumi #M49SP-1, RH7-1320 01. 1.8 ohm. Approximately 1-7/8" diameter x 1-1/8" long. Two mounting ears. Tiny 4-prong male plug. 6000 brand new units available. Offers?
-
5.25" DIAMETER DC PERMANENT MAGNET MOTORS
Hathaway . 360 DC Permanent Magnet Motors with an overall length of 5.25 inches, diameter of 2.5 inches and a shaft diameter of 5/16ths that were manufactured by Hathaway and designed to operate on 115AC/DC. P.O.R.
-
15 DEGREE 5VDC STEPPER #MSDA020KK58
MSDA020KK58. 5VDC - 11 ohms. Very compact - only 7/8" dia x 3/4" long (plus 1" x 1/16" grooved shaft). With plastic mounting flange. No specs.