Motors

43 x Dayton 6Z404 Parallel Shaft AC Gearmotors for sale. Motors are used and in good working condition. These motors deliver 18 RPM, Input Power 1/3 HP, Gear Ratio 95:1, Voltage @ 60 Hz 208-230/460. Shaft: 3-3/4" x 1-1/2". Weight: 27 pounds.

This motor will operate on 3 to 6VDC. 3/4" diameter x 1-5/8" long (includes shaft). The shaft alone in 3/8" long x 1/16" in diameter. The face of the motor has two tapped screw holes (1/2" apart) for mounting. A fine quality little motor.

We were fortunate to obtain a large quantity of the high quality Copal 6mm dia 3VDC - 7250rpm. LA6-404FB micro vibrator motors. Runs on as low as 1.2 volts. Brand new, unused, with short color coded leads.

Complete with factory installed 120/240vac 125vdc Shunt trip and A/B aux contacts. Offers considered. New units - sold without warranty.

Complete with factory installed 120/240vac 125vdc Shunt trip and A/B aux contacts. Offers considered. New units - sold without warranty.

VON WEISE model V05366AB07 1/8 HP, 115VDC/1.4A electric motors. 148:1 ratio. Continuous duty. We have available approximately 60-75 motors. We also have 20 new pulleys with bushings available.

Quantity of 1 GE Healthcare Xray Main Disconnect Panel #E4502SA available. Please click the "more info" button to open a PDF specsheet file and please click the image above to see additional color images. Please contact Us if you or your associates require this.

The manufacturer in Japan is now well behind in production - but we have stock! Oriental Motor Vexta PK266-02A Nema 23 sized 5 volt, 1.8 deg stepper is connectorized with a 6 pin 22awg with Amp MTA156 connector. Original cost was over $70! These are new, unused. Over 8000 available. Click the "more info" icon to download the full spec sheet (56 pages)

Brand new units - unused. Baldor L1204 Spec 34F01-5613. 1140 RPM, 115/208-230vac, with 1/2" dia x 1.5" shaft with flat.

Source Engineering 35DB30-1250/37G150. High quality, compact (34.4mm dia) 12vdc gearhead motor produces 18kg-cm torque @ 27RPM with only 330ma current drain. CCW rotation. Flatted shaft. Click the "more info" icon for the full spec sheet / drawing.

PITTMAN 8322-F398 24vdc motorwith push on terminals. 1.175" dia x 2.0" Length (not inclduing .1564" dia x .562" L shaft. Spec sheet (click the "more info" icon) shows drawing but specs are for a different model.

We've got 3 General Electric Busway System Taps with General Electric Circuit Breakers in each, available. Please click the "more info" button to open a PDF file of the details of this inventory, along with color photos. Please be patient while if fully loads. All inquiries on this General Electric merchandise can be directed toTed Duskes.

MABUCHI DC MOTOR. The motor measures 1-1/4"L x 7/8"W x 3/4"H. The serrated shaft is 3/8" long. We have no other spec. We believe that is a common motor model found in many different automotive applications such as mirror adjust, door lock, and other remote operated devices. No sure of specific applications!

We have available 1,411 units of: HUFFY Mini Pump. Packed 24 to a case.

Surplus Traders has 1,146 available of PHILIPS LCD Screen Cleaner (DVD ON THE GO). They are packed 24 to the case, include 1 anti-run screen cleaning gel plus 2 washable cleaning cloths. Priced to sell.

We have the following General Electric Medical Equipment available:MONITOR WITH TRAM RAC 4 AND TRAM 450SL WITH ECG, IBP, SPO2, NIBP AND TEMP/CO - model SOLAR8000,Complete EKG recorder with all accessories - model MAC5000,ASE Stress Test System, complete with treadmill and all accessories - model CASEPREMIUM,Stress Test System for Exercise - model CASE8000Generic Type Finger Pulse Oximeters with batteries - model THEFLIP,Generic Type Finger Pulse Oximeters with batteries - model SIMPLEONE,GE/LUNAR PRODIGY Fan Beam Bone Densitometer - model 1999,Transmitter modules, used in Telemetry Monitoring - model PATIENTNET,the 1999 ECHOSPEED MRI SCANNER,CT scanners - model LIGHTSPEEDPLUS plus more items available on-going.

We have available, this inventory of GE oil filled capacitors. All are GE of 2002 & 2003 vintage. They are Dielectrol with NO PCB's. 480VAC. Protected p969. Made in USA. 38.4uf we have 300+ pieces. 48uf we have 300+ pieces. 57.6uf we have 300+ pieces. These where ordered for "power factor correction modules". All are in the original GE packaging, and on the GE pallets as received from GE. We want to sell this off as one lot. All reasonable offers will be considered.

30 RPM 115VAC (.03A) gearmotor. New factory surplus. gearmotor. Motor typically rotates CW, by design it will sometimes rotate CCW. Rotation varies. Constant duty. Shaft 5/32" square, 1/4" long. Four bolt mount on 2-1/4" B.C. Overall size 2" dia. x 7/8" long. 1,500 available.

Shinano Kenshi Stepper Motor Assy 1.8 Deg 13 Ohms STH-39D199.

Reversible miniature Haydon gearhead motor. Delivers 3.6 RPM at 20VAC. 0.125" diameter. The shaft is 0.30" long. The motor is 1.07" diameter x 1.23" long. Four 6" leads. Two leads for each direction.

A complete set of parts (battery not included) and instructions to build a real live, working motor. An introduction to the workings of the DC electric motor. A creative experience that no junior experimentor will ever forget. "Watch it come to life" A number of experiments are included in the instructions, which the teacher can use to get young minds thinking. Snaps together. No soldering required. Operates on one AA battery. Contains all you see here.

Surplus Traders has available the following inventory IN STOCK! Product will be shipped from our warehouse in NY state. Please allow for list to be fully down-loaded. Use CTL + F to locate the product you are searching for. In the event you cannot locate your requirement, please contact Ted Duskes at 514-739-8723 - we may have other viable alternatives.

Buhler brush-commutated DC motor. Quiet, smooth operation from 6-42Vdc. 1.9" diameter x 2.54" long. Nominal, no-load speed, 8000 RPM @ 30VDC. 6mm diameter shaft. Rear shaft is flatted, 0.6" long. Front is 0.85" long and has a brass worm gear attached. 4" pigtail leads.

Brand new. Made for Nokia cell phones. This tiny pager motor has a removable white rubber boot. Size; Only 0.16"Dia. x 0.45"L (excluding 0.10" long shaft) Operates from 1VDC to 5VDC. Approximately 18 ohms resistance.