Motors
-
JOHNSON HC615L 13.6 VDC MOTORS
Johnson 13.6 VDC permanent magnet motors, p/n HC615L. Amperage 2.8 Amps, speed 6100 RPM, rotation reversible, torque 6.1 in-oz. Enclosure Open, vented. Duty intermittent, shaft 3.33 mm (0.131") dia. x 21/32", knurled. Overall size 1-15/32" O.D. x 2-5/8". Metal housing. Face mount accepts two M3 x 0.5 machine screws on 25 mm B.C.
-
13.6 VDC JOHNSON HC615-6506 MOTORS
Johnson HC615-6506 permanent magnet motors. Voltage 13.6 DC, amperage 1.4 Amps, speed 4575 RPM, torque 3.5 in-oz. rotation reversible. Enclosure open, vented. Duty intermittent. Shaft 3.33 mm (0.131") dia. x 21/32", knurled. Size: 1-15/32" O.D. x 2-11/32". Metal housing. Face mount accepts two M3 x 0.5 machine screws on 25 mm B.C.
-
1.8 degree 3V stepper motor. Coil: 3VDC/.42ohms. Type: 2 Phase Bi-Polar 4 lead. 7mm dia. X 18mm steel shaft with a pressfit 1-1/2 dia. 36 tooth, sintered steel cog belt gear. Ball bearings, 3" leads, 4 corner mounting holes threaded M4.5, Removable steel mtg. bracket. Dimensions: L: 2-5/8"(Body) SQ: 2-3/16".
-
115 VAC TIMER BY EATON CONTROLS
Eaton Controls model 366-101-30 zero-ten minute motor-driven timing switch. 115 VAC, 3 watts, 1/11.25 RPM, CCW. Contacts rated 5 amps @ 120 VAC, 1/4" spade terminals. Panel mount in 3/8" hole.
-
GENERAL ELECTRIC 115 VAC FAN MOTOR
1/3 HP, 115/230 VAC, 8 amp GE fan motor with thermal protection. Specs: 3000 RPM, rotation CCW, phase 1, duty continuous. Enclosure open, mount 3 studs from body. Shaft 5/16" dia. x 1-1/4" smooth shaft. Size: 4" diam. x 4".
-
RC PowerDrive 12V Motor - MABUCHI FC-130SM
We have just acquired a large quantity of 12VDC Mabuchi FC-130SM-17909A 1" x 0.6" semi flat motor with 2.0mm (.08") diameter 1.5mm (1/16") long flatted shaft. We do not have the full specs on this motor, but check the spec sheet on similar models (different voltage) by clicking on the "more info" icon. Photo on spec sheet shows long shaft - these units have a 1/16" long shaft - making them ideal for ultra-compact rc and science fair projects. This unit features 3 pole construction, carbon brushes, anisotropic magnets and low noise construction. Coil is 179 turns of 9mm dia wire. Originally used in automotive applications.
-
NISSEI DENKI OC-21 3 TO 6 VOLT DC MINI MOTOR
This motor will operate on 3 to 6VDC. 3/4" diameter x 1-5/8" long (includes shaft). The shaft alone in 3/8" long x 1/16" in diameter. The face of the motor has two tapped screw holes (1/2" apart) for mounting. A fine quality little motor.
-
MABUCHI RC-260RA 12VDC 1" DIA MOTOR IS IDEAL FOR RC AND MOTORIZED DECOY PROJECTS!
We have just acquired a large quantity of 12VDC Mabuchi RC-260RA 1" dia (23.8mm) x 1.05" (26.9mm) motor with a short 2.0mm (0.08" ) dia. shaft x 4mm long. We do not have the full specs on this motor. We do know that this unit features carbon brushes, 3 pole construction, segmented isotropic magnets and has coil specs of 281 turns of 25mm dia wire. . Originally used in automotive applications.
-
DISCONNECTS
AND
CIRCUIT BREAKERSClick on MORE INFO to view this list of Siemens disconnects and circuit breakers.
-
PowerDrive 6VDC Precision Motors
Operating range: 2.5-6VDC, 340mA. 14500 RPM, 0.21A no load. 12530 RPM, 46.2gcm max. efficiency. Stall torque: 4.72oz-in. Click "more info" for drawing.
-
12VDC stepper motor 32mA, good for such applications as office machines, automatic machines and split air conditioners. Specs: - resistance: 280 ohms - rated voltage: 12V DC - current: 32mA - impedance: 380ohm - phase: 4 - step angle / step: 5.625° / 64 - reduction ratio: 1/64 - detent torque: 4.86oz-in - pull-in torque: 4.17oz-in - max. starting pulse rate: 550pps - max. slewing pulse rate: 90pps - temperature range: 77°F - noise: 40dB - cable: 420mm AWG 1095#28 - terminal: JST SPH-002T-P0.5S - insulation strength: AC 600V - 1 sec cut-off current: 10mA Click "more info" for additional specs.
-
REXROTH PUMPS AND LIFT-U FORKLIFT BOOM
2 Rexroth AA2F0 / A2FM / A2FE piston pumps and a yoke style pump with all new gaskets. All parts are new. 1 Lift-U rebuilt hydraulic 2-stage boom for a forklift. Click "more info" for pictures of these items.
-
MARATHON ELECTRIC 145TTGN14008 MOTORS
Marathon motors - 12 units. 575 volt, 3 phase, 60 Hz, continuous duty 3450 rpm, 2 HP. Foot mount, 575/3/60 with temp sensor. Click "more info" for data sheet.
-
ELLIOTT CENTRIFUGAL COMPRESSORS
Elliott centrifugal compressors. 16800cfm, Model 50P, w/Electric Motor, Ideal, 1000hp, 4160V, 1780rpm, 118A, S/N 8508, Gearbox, Lufkin, & CO2 Blower, N1200C, Ratio 4.317:1. Two units. Click "more info" for pictures.
-
Surplus Ballast equipment. All new, unused in plastic and some boxed. ADVANCED TRANSFORMER Co 1 x Vel-2p59-s-rh-tp, 277volt 0.41amps 60 hz 2 x rl-140-tp, 120v, 60 hz 4 x r-2s40-1-tp, 120v, 60 hz 4 x rl-2sp20-tp, 120v, 60 hz 1 x vsm 175-s-1-tp, 277 v, 60hz UNIVERSAL LIGHTING 10 x 827-slh-tc-p, Slimline ballast 277 volt 60 hz 6 x 458-l-slh-tc-p, 277 volt 60 hz 7 x magnetek 413-c-tc-p, 120v 60 hz 2 x mb1x96/277 is 277 0.39amp 60hz 22 x mb2x40/277 rs 277 0.34amp 60 hz 290voc GENERAL ELECTRIC 3 x 412-l-slh-tc-p 120v 60hz 2 x 446-l-slh-tc-p 120v 60hz
-
BREAKERS BY GE, SIEMENS, WESTINGHOUSE & SQUARE D
Click the "MORE INFO" button to open this list of breakers by GE, SIEMENS, WESTINGHOUSE & SQUARE D.
-
TINY 0.4" DIAMETER "PANCAKE" 3VDC TO 6VDC VIBRATOR MOTOR
Only 0.4"diameter x 3/32" high. Brand new factory surplus. Has "pull-off" self adhesive tab. Seems to stick to anything. Factory part number is C394532 5C400. PC solder terminals extend 1". Operates on from 3VDC to 6VDC. We beat any price on this or similar product!
-
MICRO VIBRATOR MOTOR #2001002167 HAS "PUSH-IN" SPRING CONTACTS
Real tiny. Brand new inventory from cell phone factory. Made by Lumberg Connect GMBH. Factory part number is 2001002167. Overall size with the rubber boot in place; 5/8" (17mm) long X 7/32" (5mm) X 1/4" (7mm). Terminals seem to be spring loaded fingers - but are easily soldered. The actual micro motor with the cam attached but with the rubber boot removed is only 1/8" diameter X 5/8" long. Operates on from 3VDC to 6VDC. POR
-
MICRO VIBRATOR MOTOR #200802-MPN HAS "SLIDE-IN" SPRING CONTACTS
A real "PEE-WEE". Brand new inventory from a cell phone maker. Rubber encased. Factory part number is 200802-MPN. Overall size is; 5/8" (17mm) long X 7/32" (5mm) X 1/4" (7mm). Terminals seem to be spring loaded fingers - but are easily soldered. Operates on from 3VDC to 6VDC. POR