iconGuaranteed In Stock & Intelligent Buying Advice

icon 866-266-7638

DC Motors

DC Motors (53 Items)

Page
per page
Set Ascending Direction
  1. STEPPER MOTOR

    12VDC STEPPER MOTORS

    12VDC stepper motor 32mA, good for such applications as office machines, automatic machines and split air conditioners. Specs: - resistance: 280 ohms - rated voltage: 12V DC - current: 32mA - impedance: 380ohm - phase: 4 - step angle / step: 5.625° / 64 - reduction ratio: 1/64 - detent torque: 4.86oz-in - pull-in torque: 4.17oz-in - max. starting pulse rate: 550pps - max. slewing pulse rate: 90pps - temperature range: 77°F - noise: 40dB - cable: 420mm AWG 1095#28 - terminal: JST SPH-002T-P0.5S - insulation strength: AC 600V - 1 sec cut-off current: 10mA Click "more info" for additional specs.

  2. DC MOTOR KIT

    BUILD A WORKING ELECTRIC MOTOR FROM THIS KIT OF PARTS

    A complete set of parts (battery not included) and instructions to build a real live, working motor. An introduction to the workings of the DC electric motor. A creative experience that no junior experimentor will ever forget. "Watch it come to life" A number of experiments are included in the instructions, which the teacher can use to get young minds thinking. Snaps together. No soldering required. Operates on one AA battery. Contains all you see here.

  3. MABUCHI RS-555PH-3255 MABUCHI MOTOR

    MABUCHI RS-555PH-3255 HIGH TORQUE 3950 RPM 12VDC MOTOR/GENERATOR - 5 POLE CONSTRUCTION FOR HIGHER TORQUE - LOWER POWER

    MABUCHI model RS-555PH-3255 (RS555PH3255). What a find.... Originally designed to be installed in portable drills and printers. (Also works as a fine generator) This model features improved design to reduce external noise levels. Has "wrap around" magnetic shield. High torque 380.3 gm-cm with a stall-torque figure of 1360 gm-cm. An excellent find for the small or medium sized OEM who requires modest quantities of this quality product but cannot satisfy the manufacturer's demand for large quantity purchases. Hundreds of application in Robotics, the RC field etc. (shaft is 1/4 flat - stainless steel 1/8" dia). No load speed is 5500RPM - excellent for "gearing down" to provide ultra high torque for larger projects. 1-7/16" dia x 2-5/8" long. Flatted shaft is 1/2" long. 3/16" push on terminals. Check the spec sheet by clicking the "more info" icon. For a larger photo, click on the photo above. This unit features 5 pole construction for higher torque and power efficiency, anisotropic magnets, and coil specs of 55 turns of 32mm wire. We have tested this motor on one alkaline pencell and find that it will deliver useable torque at reduced RPM. Superb for school projects.