Motors

DirecTorr dual stage rotary vane vacuum pump by Sargent-Welch, model 8814A, p/n 1417A. With Franklin Electric Motor Model 1112575400. Speed 1725/1425 rpm, 1/2 HP. /208-230 V, 60/50 Hz, 6.8/3.4 A, 1 phase. Displacement Rate 5.0 cfm (141.6 l/min). Max Ambient Temp 40 C. Two units available.

This list contains a wide selection of circuit breakers, magnetic flow meters, solenoids, switches and much more. May be subject to a minimum order requirement. Click MORE INFO to view the list in it's entirety.

Click on MORE INFO to view this list of Indramat servo motors and components. Subject to a minimum order requirement.

The following Baldor motors are available on a first-come basis. Photo shown is for illustrative purposes only.Qty. 1 - CM3542 Baldor AC motor 0.75 hp, 230/460 Volts, 1725 rpmQty. 1 - VM3542 Baldor AC motor 0.75 hp, 208-230/460 Volts, 1725 rpm

Beuhler 24VDC dual shaft permanent magnet motor. 0.15 amps, 1/35 HP, 3450 RPM. Duty intermittent, reversible rotation, TENV enclosure. 3 holes in face mount. Dimensions: 1-9/16" dia. x 3-1/8" with 5/32" dia. x 7/16" and 5/32" dia x 3/4" w/flat shafts.

220VAC, 1.9 amp dual shaft motors by RMR Corp, with rotation facing shaft on lead end. 1/8 HP, 1000/1200 RPM, CW rotation. Single phase, continuous duty. 3 bolt mount. Requires 5 mfd capacitor. Dimensions: 5-1/2" dia. x 4" with 1/2" dia. x 2 1/2" shaft and 1/2" dia x 1 3/8" shaft.

Fasco 115VAC, 1,110 RPM 3-speed fan motors. 2.5 amp, 1/20 HP, 1,110/1,010/915 RPM. Continuous duty, clockwise rotation facing shaft on lead end. 3 bolt mount. Dimensions: 5-1/2" dia. x 5-1/2" with 1/2" x 2" x 2-1/4" shafts. Requires 4 mfd capacitor (not included).

115VAC 1070 RPM dual-shaft motors by Fasco. Two-speed, great replacement for blowers and fans. Single phase, air over continuous duty. 1/12 HP, 1.0 amps, CW rotation. ODP enclosure, mount 3 bolt 7-1/2 B.C. 3 bolt mount. Dimensions: 5" dia. x 4". Shafts: 1/2" dia. x 4-3/4 and 1/2" dia. x 1-7/8". Unit requires 3 mfd capacitor (not included).

208-230VAC, 0.8 amps dual-shaft motors by A.O. Smith. 1180 RPM at 60 Hz/900 RPM at 50 Hz. Rotation: CCW. 3 bolt mount. Dimensions: 5-1/2" dia. x 4-1/2" with 1/2" x 2-1/2 and 1/2" x 3-3/4" shafts.

Surplus Traders has the following Siemens industrial electrical thermal magnetic molded case circuit breakers available:ED43B06060 Amp, 480 Volt, 3 Pole, standard interrrupt, Thermal-Magnetic trip unitJXD63B200200 Amp, 600 Volt, 3 Pole, standard interrrupt, Thermal-Magnetic trip unitJXD63B400400 Amp, 600 Volt, 3 Pole, standard interrrupt, Thermal-Magnetic trip unit.

Transformers, load centers, MSHA approved fans and more, for use in the mining industry. For complete list of inventory available, click "more info.

NCR's AXIOHM Thermal/Impact Ptr W/2 Color, USB/RS232, MICR, Knife Model A760-2215

460VAC Vertical hollow shaft motors by US Electric: - 150HP 1800RPM 230/460 VOLT WP1 444TP FRAME - 200HP 1800RPM 230/460 V0LT WP1 445TP FRAME

One unit available of each of the following vertical hollow shaft motors by Teco-Westinghouse: - VH1504 150HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH2004 200HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH2504 250HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH3004 300HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH3504 300HP, 1800RPM, 460V, WP1 PUMP MOTOR Specs available on request.

Click on MORE INFO to view this list of contactors, photo cells, time clocks and circuit breakers manufactured by Cutler Hammer, Siemens, Honeywell and Square D. We will accept offers for the complete lot.

Parallel shaft gearmotor by Merkle-Korff. 9VDC, 0.23 amps @ no load, 62 RPM. Reversible rotation, intermittent duty and gear ratio of 46.1:1. Die-cast gear housing. Dimensions: 3-1/4" x 2-1/2" x 3-5/8" with 5/16" dia. x 7/8" w/flat & snap-ring groove. Mount: Six thru-holes on 2-1/16" x 1-23/32" centers or 2-1/16" x 2-29/32" centers. Holes are for #8 thread forming screws.

TRW Globe motors, model 405A100. 6VDC, 0.2 amps, 5200 RPM. Ceramic, permanent magnet motor with metal housing and face mount two #6-32 tapped mounting holes. Torque: 1.5 in.-oz. Sleeve bearings, closed enclosure, reversible rotation and continuous duty. Size: 1.275" diam. x 1-15/16" with 1/8" diam. x 3/8" long shaft. Face two holes on 1" centers mount.

Nichibo UC-280P-19160-N - Great for solar kits (use with our MF367, TH324 or TH325 solar cells). Also easily adaptable to door lock and mirror adjust mechanisms for many foreign cars. Serrated shaft facilitates easy mating to shaft. Click the "more info" icon for the full spec sheet.

CKD model J209-056 24VDC synchronous gearmotor comes attached to removable mounting bracket. 15 RPM, 0.2 amps no load. Intermittent duty, CW rotation. Dimensions: 4" x 1-3/4" x 2" with 3/16" dia. x 1/2" long shaft w/ flat shaft. 2 bolt mount on 3-13/32" B.C.

We have an assortment of small Mabuchi DC motors that we wish to liquidate to make room for new purchases! Sorry - no model number choice. We ship whatever is easiest to ship quickly. All units are new, unused and will have an operational range (depending on models shipped) from as low as 1.5 volts to as high as 24vdc (sorry no choice in what we ship - could be any voltage, any motor size, any shaft - long or short, etc)! Excellent for DC motor theory, electrical engineering courses, etc.

Click on MORE INFO to view this listing of Siemens Servo Motors, Modules and Drives that are available. Some have been turned on for demonstration purposes only. All as new in original packaging.

6 VDC, 1.0 amp (no load) Johnson Electric motors, model 169324. RPM 8600, reversible rotation, duty intermittent, open enclosure. Shaft: 1/8" dia. x 3/8" long serrated. Mount: 2 hole face on 25mm c/c. Overall dimensions: 1-3/8" dia. x 2-1/2".

120VAC inline parallel shaft Brevel gearmotors. 80 RPM, 2 amps, CW rotation, duty intermittent. Shaft: 3/8" diam. x 3/4" w/ flat. 4 hole face mount 1-9/16" x 1-1/4" centers. Overall dimensions: 3-1/8" x 2-1/2" x 4-3/8".

Two GE motors available as follows: 1) 1500HP GE 257 rpm 2300V frame 9464, 250V excitation 2) 1500HP GE 257 rpm 2300V frame 9485, 250V excitation Looking for offers.