Motors

1x 7MF4032-1BB00-1AA6-Z 4x 7MF4432-1DC62-1NC5-Z 8x 7MF4432-1BA22-1BC6-Z 12x 7MF4432-1CA22-1BC6-Z 1x 7MF4320-1FB02-1AA3-Z 1x 7MF4432-1BA22-1BC5-Z 2x 7MF4032-1BA10-1BC6-Z 3x 7MF4432-1CA22-1BC5-Z 11x 7MF4432-1DA22--1BC5-Z 1x 7MF4432-1EC62-1NC5-Z 3x 7MF4432-1DA62-1NC5-Z 1x 7MF4432-1DB42-1NC6-Z 2x 7MF4020-1BB00-1AA3-Z 1x 7MF4032-1DB00-1NC6-Z 1x 7MF4032-1DA10-1NC6-Z 7MF4020-1BB00-1AA3-Z

What a buy! We found 55,000 of these great motors. Brand new, old stock, in original Mabuchi cartons. Super Mabuchi quality , metal brushes, - as used in motorized toys, submarines, RC vehicles and boats, massagers, vibrators, etc. 24mm dia with long 10mm shaft. Output power approx 0.8 - 4.5W. Made in TAIWAN.

QTY-1 1984 Gardner Denver Electra-Saver II 75 HP Air Compressor, Control: W/D 201ECM544 120V/60Hz, Max Pressure: 110. Allis Chalmer Motor 75HP, 1760RPM, 460V, 175/87.5Amps, 3ph Tank By The Buckeye Boiler Company, Nat'l BD No: 550849. Hours: 22,202 QTY-2 1984 Ingersoll-Rand 15HP Reciprocating Air Compressor - Model: 10T3NLM Motor Specs: Model# 5K254AC205, 15HP, 60CFM, 100PSI QTY-1 2000 Gardner Denver EBE99M12, 25 HP Air Compressor. Full Load Operating Press PSIG: 125, Input Volts: 230, 3ph, Tank Capacity: 120 Gallons. Last Run: 2012 QTY-1 Mattei 50 HP Air Compressor C 200 MV, 60Hz, 208V, 3ph, 1745RPM QTY-1 2002 Compair L75, 100 HP Rotary Screw Compressor. Air End Number: 10214174, Contract Number: 45129, Compressed Medium: Air, Capacity: 500 CFM, Suction Pressure: 0 PSI, Operating Pressure: 100 PSI, Motor RPM: 3510, Motor HP: 100 QTY-1 1998 Champion VR5-8, 5 HP Air Compressor. 5HP, Volts: 208-230V/460V, 14.8-13.4/6.7Amps, 3ph, 60Hz, 80 Gallons, Unit Pressure Setting: 150-175 PSIG QTY-1 Ingersoll Rand 5 HP Air Compressor T30, Compressor Model Number: H2540D5. Baldor Motor: 5/3HP, 230V/460V - 190V/380V, 1725/1425RPM, 60/50Hz, 14/7Amps 11/5 5Amps, 3ph, Compressor Lubricant: 32298234 Pictures available upon request. Looking for offers.

108 cases of 12/case GE Par 56 (399 watt) mogul base airport lamps. Looking for offers on quantity.

158 AC Motors by AO Smith, Marathon, Baldor, Worldwide electric, Tatung, Reliance/Rockwell, and US Electric. Click on the "MORE INFO" icon to view this list of AC Motors. Looking for take all offers.

Cutler Hammer S801 Series S801V85N3S - Soft start reduced voltage motor starter with standard control interface. Style 92EA10027C0001C, 850 FL Amps, non-reversing, open type. MOD: Max HP: 900 at 600V 3-Ph. New. Looking for offers.

Excellent low cost, high speed (11.5Krpm) compact motor. Draws only 500ma at no load and 2.6amps at 9700 rpm under a load of 9.7m-Nm. At maximum power, unit delivers 30m-Nm and draws 7.2 amps (18.4 watts). Units was designed for a special project that never got off the ground. 65,000 available. Full drawing and specs/torque graph available - click the "more info" icon.

Click on the MORE INFO icon to view this list of 81 AC electric motors by GE, Emerson, Baldor, Leeson, and WEG. AC motors range from 1HP to 100HP. Looking for partial or take all offers.

Concentrating solar power technologies utilize movable mirrors, or heliopstats, to focus light onto absorbers.Uniquely designed gear drives from Siemens ensure that the heliostats optimally track the sun's movement. In original crates. 3 per crate.

GE dripproof resilient base fan blower single shaft electric motors, model: K549 5K48UN3057. Rated at 1.5 - 1/2 HP, 460V, 3PH, 60Hz, 1725/1140 RPM, FR. 56H, Code L, 2.3/1.4 Amps. 15 units available, most are new still in original box. Looking for offers on quantity.

Click on MORE INFO to view this extensive list of industrial parts. Motors, gearboxes, sensors, modules, and much much more.

PowerTec Industrial Motors Inc servomotor model# E254M3F0N9A1010 with the following specs: - PacTorq PowerTec Brushless P.M. Servomotor - Model: E254M3F0N9A1010 - Frame: E254TZ - HP: 50.0, KW: 37.3, RPM Base: 1750, RPM Max: 4000 - Tcs: 188 Nm - Ics: 62 RMS Amps - I Rated RMS Amps: 68 - I pk RMSAmps: 186 @ 150 C - Duty: cont. - Encl: DPFG (Drip Proof Fully Grounded) - IP Code: 22 - Max Amb: 40 C, Insul Class: F - Bus VDC: 640 - Phases: 3, Poles: 8 - Kett: 203.5 - Rtt: 0.132 Ohms @ 25 C - Winding Connection: (Delta) 1Y - C.T. SPP Range: 2:1 - Integral Feedback Device: Resolver - Temperature Sensor: Thermal sw - Manual No.: 2093-200001-002 This motor has been made with inside priming/painting, and has an altitude rating of 12,000ft for the bearing grease. 1 unit available, send in your offers today.

Click on MORE INFO to view this listing of surplus parts by Allen Bradley, Fanuc, Siemens, and many other manufacturers.

MABUCHI FK-280PA Diameter 18.3mm x 24.2mm - length 30.5mm. 6 - 15VDC (12VDC nominal). 15mm shaft. No load speed 12,000 RPM.

This list contains parts by Allen Bradley, Omron, Wago, Siemens and more. Click on MORE INFO to view the details.

Click on MORE INFO to view this list of assorted circuit breakers.

QTY-12 new in box CH&E centrifugal pumps model# 4155e-3C TACOMJ-02. Pumps are 1 1/2" input and output. 1.5HP MOTOR 220V 3PH. Send in your offers today.

This list contains surplus General electric Industrial electronic parts. Click on MORE INFO to view this assortment. Minimum order requirement may apply.

Vibrator Motors are motors that produce vibration via an unbalanced mass on its drive shaft. The motors come in different shapes and sizes and can be used for a lot of different things. It can be as small as a dime and as big as a grown man. Uses for vibrator motors range from telecommunications, industrial, robotics and even personal use. Let us explore some of the ways where vibrator motors are being used. During the early age of electronics vibrators were used to provide an alternating current (AC) power supply from a direct current (DC) source in an inverted circuit. This kind of circuit was commonly found in car radios which were powered by vacuum tubes to produce sound. Vibrator Motors are motors that produce vibration via an unbalanced mass on its drive shaft. The motors come in different shapes and sizes and can be used for a lot of different things. It can be as small as a dime and as big as a grown man. Uses for vibrator motors range from telecommunications, industrial, robotics and even personal use. Let us explore some of the ways where vibrator motors are being used. Industries use vibrator motors in many different ways. Industrial-sized vibrating machines can get very large depending on what needs to be shaken. For example a feed hopper’s vibrating motors can shake approximately 50 kilograms of inertial mass. Vibrator motors are also common on construction sites. These vibrating machines are used to consolidate freshly poured cement so that all the trapped air and water escape allowing the concrete mixture to settle in properly. A similar type of device is also used to separate aggregate materials at construction sites. Sorting gravel from sand can be a chore, but with a sorter that uses a vibrator motor, this work can be accomplished in no time. On a smaller scale, tattoo artists use tattoo guns with vibrating needles that pierce skin allowing ink to permanently settle in. Engravers also use a similar tool to permanently etch designs and lettering on metal, glass and other materials. Other uses include propulsion for robots and motors for anti-lock braking systems. A vibrator motor has a more personal use too. Who hasn’t enjoyed a massage from a personal electronic massager - those battery-powered massagers that differ in shape and size and can be small enough to keep in your drawer or purse? These handheld gadgets are great for sore backs, tired feet and tense shoulders. It’s a good way to relax and de-stress even while at work. Big massagers like massage chairs and vibrating beds utilize bigger vibrator motors but are equally relaxing. Believe it or not furniture manufacturers and even electronics use vibrator motors to test the durability of their products. This would usually involve strapping a vibrating motor onto a chair or monitor while leaving it on for a considerable period of time. This ingenious way of testing for performance can give manufacturers a good idea of how to improve design and durability. The use of vibrator motors extend in many ways including pharmacy, medicine and other high-tech industries. It might be easy to take such a plain machine for granted. Yet, without these motors the simple conveniences we enjoy today might not be possible at all.

A close match to Mabuchi RK370 series both in size and current drain - this Nichibo RF-370CH-15370 unit feature a high torque figure of 186 gm-cm at stall. Hundred of applications - excellent for school science projects. Body is 24.4mm dia x 39mm lenght (including shaft). Shaft diameter is 2.0mm x 4.8mm. Operates on as low as 3 volts. Check the full spec sheet - click the "more info" icon

The following Siemens products are available at surplus prices:Qyt. 1 - 9510DC-1155-ABTA PWR, MTR, 85-240V, 120-347VIN, 50HZ, Weight: 32 lbs.Qty. 1 - 9510DC-1RTU-AZZA 9510 ADVACED DATA RECORDER, Weight: 32 lbs.Qty. 2 - 9510EC-1RTU-GCZA 9510 ADVACED DATA RECORDER, Weight: 32 lbs.Qty. 2 - 9510EC-2155-JCTA 9510 POWER METER, Weight 32 lbs.Click on MORE INFO to see additional photos in pdf format.

Click on MORE INFO to view this list of surplus Reliance electric motors that we have available.

We have just acquired a large quantity of 12VDC Mabuchi FC-130SM-17909A 1" x 0.6" semi flat motor with 2.0mm (.08") diameter 1.5mm (1/16") long flatted shaft. We do not have the full specs on this motor, but check the spec sheet on similar models (different voltage) by clicking on the "more info" icon. Photo on spec sheet shows long shaft - these units have a 1/16" long shaft - making them ideal for ultra-compact rc and science fair projects. This unit features 3 pole construction, carbon brushes, anisotropic magnets and low noise construction. Coil is 179 turns of 9mm dia wire. Originally used in automotive applications. TEMPORARY SPECIAL!

Two units of new in box Ampco pumps, model ZC2 21/2 x 2. 10HP Balder reliance motor 3450 RMP. Click "more info" for additional photos.