Other
-
Ingenico iWL220 / iWL250 / Move 2500 Battery
Ingenico iWL220 / iWL250 / Move 2500 Battery Replacement external battery for the Ingenico iWL Move 2500
-
Ingenico Magic Box for iCT 220/250
Ingenico Magic Box for iCT 220/250 The Ingenico Magic Box for the iCT 220/iCT 250 allows for the connection of a Pin Pad, Ethernet, Phone Line and Power Pack.
-
Verifone Vx 520 NON-CTLS/NFC Power Pack
Verifone Vx 520 NON-CTLS/NFC Power Pack This Power Supply will work only with the Verifone Vx520 Contactless Terminal, Part Number: M252-653-03-NAA-3 and M252-653-AD-NAA-3.
-
Verifone Vx 520 CTLS/NFC Power Pack
This Power Supply will work only with the Verifone Vx520 Non Contactless Terminal, Part Number: M252-753-03-NAA-3.
-
VeriFone Vx 805/820 Pin Pad to Verifone Vx
Verifone vx805, vx820 pin pad to Verifone Vx 520 Non- Contactless, Vx 520 Contactless credit card terminals. This cable is 3 meters long, 9.88 ft coiled/ straight cable.
-
Poynt P33xx Dock/ Comm Dock with Power Pack
This Poynt P33xx Dock/ Charging Base w/ Power Pack will work with the Poynt P33xx Smart Tablet
-
The most advanced counter top paper extender for the Verifone Vx 520. The sled stabilizes the unit and holds 4 times the amount of paper on the contactless and 3 times the paper on the non-contactless. This paper sled will fit the following thermal paper rolls: 2 1/4" x 50', 2 1/4" x 72', 2 1/4" x 80', 2 1/4" x 85', 2 1/4" x 150', 2 1/4" x 200', 2 1/4" x 230' Buy 10 Get 1 Free!! **Vx520 PAPER SLED ONLY - DOES NOT INCLUDE the VX520 card reader device - photo for illustrative purposes only**
-
FLIR TA80 Universal CAT IV Silicone Test Probes
FLIR TA80 Universal CAT IV Silicone Test Probes Model# TA80 1000 V, 10 A test probes. UL certified to CAT IV–1000 V rating. Gold-plated tips for professional precision. Double-extruded multi-color silicone leads with wear indication. High-strength stress relief integrated into the probe. 41’ lead length with a total length of 46’ including the probe. Removable probe protection caps for 4mm tips.
-
FLIR TA74 Universal Flex Clamp Probe Accessory 18 in (45cm)
FLIR TA74 Universal Flex Clamp Probe Accessory 18 in (45cm) Model# TA74 The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for multiple conductor measurements, double-wrap requirements, and deeper access. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.
-
FLIR TA72 Universal Flex Clamp Probe Accessory 10 in (25cm)
FLIR TA72 Universal Flex Clamp Probe Accessory 10 in (25cm) Model# TA72 The FLIR TA72 adds capabilities, simplifies challenges, and gives the best readings with your existing meter. Made with a narrow, 10-inch long flexible coil clamp and locking mechanism, the TA72 provides maneuverability and convenience to easily take measurements in tight or awkward spots. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.
-
FLIR TA70 Universal CAT IV Insulated Alligator Test Probe Clips
FLIR TA70 Universal CAT IV Insulated Alligator Test Probe Clips Model# TA70 Works with FLIR TA80 test probes. Complies with latest UL CAT IV/CAT III – 1000 V. Slide-on connection with finger guards.
-
FLIR TA60 Universal Thermocouple probe with adapter
FLIR TA60 Universal Thermocouple probe with adapter Model# TA60 Type K thermocouple temperature sensor. Can be used to measure temperature with many meters. Fast responding with a wide general-purpose measurement range. Safety-shrouded banana to banana connection
-
FLIR TA55 Universal AC Current Line splitter
FLIR TA55 Universal AC Current Line splitter Model# TA55 Provides easy and safe measurements of current and voltage from two or three wire outlets. Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground) for accurate current measurement. Dual ranges (x1 and x10) for higher resolution on low-amperage readings. Built-in recessed voltage testing inputs.
-
FLIR TA52 CM 7x Magnetic Meter Mount
FLIR TA52 CM 7x Magnetic Meter Mount Model# TA52 Securely mount your FLIR Clamp Meter to an electrical panel or other magnetic surface for convenient test probe measurements. The low-profile TA52 firmly attaches to the meter's tripod mount and stores easily.
-
FLIR TA50 Universal Magnetic Hanging Strap
FLIR TA50 Universal Magnetic Hanging Strap Model# TA50 Hang your meter on metal electrical cabinets – allowing you to focus on your testing. Magnetic strip designed for DM9x series multimeters or any meter that accepts a 1″ (25 mm) strap. Durable nylon strap. Securely fastens to the meter with an integrated mounting tab.
-
FLIR TA15 Universal Soft Sided Case
FLIR TA15 Universal Soft Sided Case Model# TA15 The FLIR TA15 is a universal, multi-compartment soft-sided case designed to protect and carry your FLIR clamp meter, flex clamp accessory, test leads, or any other tool you need on the job. It is recommended for use with any FLIR clamp meter and the FLIR Universal Flex Current Probe Accessory (TA72 or TA74). Two large instrument compartments. Removable hand strap. Quick-release belt clip. Convenient magnetic bag closure. Label/luggage tag window. Two durable side pockets (mesh/neoprene) **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**
-
FLIR TA14 Holster for TG165 Model# TA14 Add the TA14 clip holster to your belt to conveniently carry the TG165 Imaging IR Thermometer at your side – whenever, wherever – you need it. The multi-positional, durable and secure design makes it easy for you to quickly access the TG165 while on the job and free your hands for other tools
-
FLIR TA13 Protective Case for TG165
FLIR TA13 Protective Case for TG165 Model# TA13 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR Test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Fits the FLIR TG165 and accessories. Custom instrument compartment protects tools from extremes. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**