Other

FLIR TA13 Protective Case for TG165 Model# TA13 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR Test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Fits the FLIR TG165 and accessories. Custom instrument compartment protects tools from extremes. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**

FLIR TA12 Universal General Purpose Accessory Case Model# TA12 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Durable EVA protective case for general accessories. Internal flap with dual pockets separates additional storage compartments. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**

FLIR TA11 Protective case for CM7x and CM8x Series Model# TA11 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Fits the FLIR CM7x and CM8x series of digital multimeters and accessories. Custom instrument compartment protects tools from extremes. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**

FLIR TA10-F Protective case for DM9x and TA72/74 or CM55/57 Model# TA10-F Made from durable EVA rubber, the TA10-F Protective Case shields against harsh environmental conditions and damage. It is exclusively designed for use with the FLIR DM92/DM93 Industrial Digital Multimeters, the FLIR TA72/TA74 Universal Flex Current Probe Accessories, and the FLIR CM55/57 Flexible Clamp Meters with Bluetooth. Form-fitting instrument compartment. Concealed zipper resists dirt. Resilient nylon carry strap. Rugged, non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**

FLIR TA10 Protective case for DM9x Series Model# TA10 Case made from durable EVA rubber. It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**

FLIR TA04-KIT Rechargeable Battery Kit for DM284 Model# TA04-KIT Rechargeable battery kit for the FLIR DM284, DM166, DM284, DM285 and CM275 with extended battery life. The TA04-KIT includes a FLIR DM284 replacement battery door, an Li polymer rechargeable battery, an AC charging adapter with international AC inlet clips for wall outlets, and a quick start guide. Running time of up to 12 hours. The following AC inlet clips are included: North America, Europe, UK, Australia, and Korea.

FLIR TA03-KIT AAA Universal Rechargeable Battery Kit Model# TA03-KIT Rechargeable battery kit for the CM174 Imaging 600A AC/DC Clamp Meter with extended battery life. The TA03-KIT includes 8 NiMH rechargeable batteries (2 sets), Charger and AC adapter with international AC inlet clips for wall outlets and a quick-start guide. The following AC inlet clips are included: N.America, Europe, UK, Austraila, Korea.

Ambitex VMD221 Vinyl Gloves 10 boxes per case 100 gloves per box

3M 8000 N95 Respirator Mask in bulk NIOSH APPROVED!

FLIR TA02 Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176 Model# TA02 ‣ Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176 ‣ 120V Power Adapter ‣ For TG165/167 MR60/160/176

FLIR MR-PINS6 6 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair Model# MR-PINS6 ‣ 1 pair of 6" Pins ‣ Fits Hammer, Wall Cavity and Combo Probes ‣ Unibody construction vs. two piece ‣ Smaller diameter pins ‣ Sandblasted hardened steel ‣ Insulated with abrasion resistant coating

FLIR MR-PINS4 4 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair Model# MR-PINS4 FLIR’s new insulated pins are smaller in diameter - requiring minimal force to drive the pins into a surface - resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improve d bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.

FLIR 2 Inch Pins for MR06, MR07 & MR08 - Includes (10) pairs Model# MR-PINS2-10 • 10 pairs of 2" Pins • Fits Hammer, Wall Cavity and Combo Probes • Unibody construction vs. two piece • Smaller diameter pins • Sandblasted hardened steel • Insulated with abrasion resistant coating

FLIR MR-CABLE RJ45 to BNC Cable for FLIR Moisture Meters and Accessories Model# MR13 RJ45 to BNC Cable

FLIR Replacement Temperature and Relative Humidity Sensor Model# MR13 The FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there’s no clear presence of moisture, the MR12’s ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.

FLIR Ball Probe Moisture Meter Accessory Model# MR12 The FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there’s no clear presence of moisture, the MR12’s ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.

FLIR Temp and Humidity External Probe Model# MR11 - Get instant dehumidifier moisture readings, increase remediation work efficiency; pre-deploy sensors in dehumidifier exhaust Ducts and avoid need for extended acclimation times between measurements - Facilitates more accurate measurements; place sensor away from objects that may influence/ pollute the measurement - Use in locations where access is Restricted, E.G. Measure inside wall Cavity via small access hole - Better ergonomics; use standalone or with the included mounting Accessories, permanent mounting bracket and magnetic sensor mount TA52, or with the optional extension pole MR04

FLIR Protective Case for FLIR Moisture Meters (MR10-2) Model# MR10-2 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions.

FLIR Protective Case for MR77 for FLIR Moisture Meters Model: MR10 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. CASE ONLY - Does NOT include the equipment. Photo for illustration purposes only

FLIR Baseboard Probe for FLIR Moisture Meters Model# MR09 The MR09 Baseboard Probe is ideal for taking measurements in hard-to-reach areas. Probe behind baseboards, wall trim, and crown molding without requiring removal. Long, thin, flexible probes minimize needed space.

FLIR Hammer and Wall Cavity Probe Combo with Shoulder Bag for FLIR Moisture Meters Model# MR08 The MR08 Hammer and Wall Cavity Probe Combo is ideal for both hammer probe and wall cavity applications. The hammer probe has an additional handle on the bottom to add convenience for angled, horizontal, and inverted hammer-probing needs. The bottom handle can be unscrewed and used as a wall cavity probe to measure the moisture level of insulation within the wall cavity and can also reach the inside face of the exterior wall. You can also install the impact plate for use with a hammer to punch the extended pins through drywall.

FLIR Hammer Probe with Shoulder Bag for FLIR Moisture Meters Model# MR07 The MR07 Hammer Probe expands the functionality of your FLIR Moisture Meter by allowing you to take measurements in subfloor through carpet, hardwood flooring, and hard materials that are difficult to penetrate with a standard pin probe.

FLIR Wall Cavity Probe Model# MR06 The FLIR MR06 Wall Cavity Probe expands the functionality of your FLIR moisture meter by allowing you to easily measure insulation moisture levels within a wall cavity and the inside face of exterior walls. FLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.

FLIR Replacement Pins for MR77 (wide) 2.26~2.35 mm - includes (25) sets of pins Model# MR05-PINS2 Replacement Pins for MR77 (wide) 2.26~2.35 mm - Includes 25 Sets of Pins