Test Equipment
-
NEW POCKET OSCILLOSCOPE DESIGNED BY ELECTRONICS ENTHUSIASTS FOR ELECTRONICS ENTHUSIASTS!
Designed by electronics enthusiasts for electronics enthusiasts! Powerful, compact and USB connectivity. This sums up the features of this oscilloscope. The large keyboard and bright LCD makes this unit a breeze to use, combine this with great specifications and you'll wonder how you ever managed without it! For full spec, please click on the "more info" button.
-
2 DIONEX DX-100 CHROMATOGRAPH ANALYZERS
Only 2 available. Manuufactured in 1991. Both tested and working properly. Acqusition cost was $35,000 ea. Offers?
-
AGILENT HP 8902A MEASURING RECEIVER
Agilent HP 8902A measuring receiver. The HP / Agilent 8902A Measuring Receiver combines the capabilities of a frequency counter, distortion analyzer, modulation meter, attenuation receiver, and power meter to give complete, accurate characterization of cw and modulated signals in the 150 kHz to 1300 MHz frequency range. It accurately measures AM, FM, and Phase modulation and recovers the modulation signal. It measures the RF frequency, RF power, modulation frequency, and distortion at 400 Hz and 1 kHz. Post detection filters allow the user to accurately characterize the modulation. Options 030 through 037 permit adjacent-channel power measurements or carrier-noise measurements. For increased frequency accuracy, an optional high stability time base, option 002, is available. A built-in AM/FM Calibrator permits quick confidence checks of measurement accuracy. AM and FM accuracy is 1%. A built-in 50 MHz power reference ensures that the 11722A Power Sensor makes accurate RF power measurements.
-
VARIABLE 0-130 VOLTS AC 1000VA TRANSFORMER WITH VOLTAGE METER
Great for the test bench or lab. Input; 100VAC to 120VAC/60Hz. Output is variable from 4VAC to 130VAC at 1000VA. Has external fuse holder, on/off switch and analog voltage meter. Weighs 19 pounds.
-
VARIABLE 0-130 VOLTS AC 2000VA TRANSFORMER WITH VOLTAGE METER
Great for the test bench or lab. Input; 100VAC to 120VAC/60Hz. Output is variable from 4VAC to 130VAC at 2000VA. Has external fuse holder, on/off switch and analog voltage meter. Weighs 22 pounds.
-
VARIABLE 0-130 VOLTS AC 3000VA TRANSFORMER WITH VOLTAGE METER
Great for the test bench or lab. Input; 100 to 120VAC/60Hz. Output is variable from 4VAC to 130VAC at 3000VA. Maximum output current 30 amps. Has external fuse holder, on/off switch and analog voltage output meter. Output binding posts and On/Off lighted power switch. Weighs 28 pounds.
-
CMA ECONOMICAL CLAMP-ON METER.
CMA Economical clamp-on meter. Test AC & DC volts, AC amps, Ohms and continuity. The CMA is a rugged and compact manual ranging analog clamp-on that is easy to read. Features include compact size, color coded scale plate, tear drop jaw design, pointer lock, recessed input jacks for safelty, fuse protection and 1 1/4 inch jaw opening. 150 units available
-
HI-VOLTAGE TEST SCREWDRIVER TESTS 80 TO 500 VOLTS AC OR DC
This very handy combination screwdriver/tester works over the range of 80 to 500 volts AC or DC. Use for testing ground lines, open or shorted circuits etc.
-
MINIATURE HOOK-ON TEST PRODS FOR TESTING ICS AND OTHER TINY PARTS
This test lead set consists of 5 color coded 16" test leads with miniature hook-on prods at both ends. A must for techs and experimenters who require temporary interconnects without danger of shorting. Red, black, yellow, green and white.
-
DELUXE SOLDERLESS TEST LEAD KIT
The kit includes; Two 42" flexible, vinyl-covered test leads, heavily insulated to prevent high voltage breakdown and cut-through. 80-strand copper conductors eliminate wire fatigue and assure long life. The kit includes adaptor accessories most often used by servicemen. This kit can perform virtually every test requirement. Each lead is attached to a 4-3/4" probe (1-red, 1-black). Banana plugs on each end have nickel-plated phosphor bronze springs to maintain rigid contact through many thousands of insertions. Heavy plated BRASS Adaptors-Color-coded Spade Lugs that are large enough for lab. instruments (up to 1/4" dia. center post). Test prod phone tips(0.180" dia.) Strong spring action alligator clips. NP phone tips.-not insulated. Each insulated adaptor completely covers banana plugs to eliminate accidental contact, avoiding shorts. Great for schools.
-
The most useful test leads yet devised. Use them in the conventional manner or adapt them to individual requirements. Tiny, sturdy, push-to-clip prods can be firmly attached to hard-to-reach components in chassis-whether large or small terminals. Clip-onto-component feature enables you to test parts for long periods without actually handling the test leads. Hands are free for other work. Each prod is connected with solderless, kinkless wire terminating in an insulated banana plug. A removable, nickel-plated phone tip (supplied) fits over the banana plug allowing the individual the option of using meters with either banana or phone tip jacks. Overall leads length is 36 inches. Two unbreakable high dielectric strength prods, black and red.
-
QUALITY TEST GEAR - WITH 30 DAY WARRANTY
All equipment is in good working condition with a 30 day warranty. ANDO AP-4221 Offers? ANR MS2721A $10,500.00 HP 54540C $4,500.00 HP 54832D/080 Offers? HP 81106A $2,500.00 HP 8902A $10,500.00 Contact Ted Duskes - 514-739-8723
-
HP AGILENT 4278A CAPACITANCE METER
We have two HP Agilent 4278A's. One is new in the original manufacturer box. The second is refurbished but is in good condition. The 4278A 1 kHz/1 MHz capacitance meter is a high-speed, highly reliable, precision test instrument aimed at incoming/outgoing capacitor inspection applications on the production line and in quality control. The 4278A will improve test efficiency by performing comparative measurements of low to medium value capacitors (up to 200 uF - a range that covers most ceramic and film capacitors).
-
THE U3641/3641N IS A 3-GHZ SYNTHESIZED SPECTRUM ANALYZER IDEAL FOR FIELD USE
ADVANTEST U3641 3 GHz Max, Synthesized, Portable, Options: 60 / 74 / BATT The U3641/3641N is a 3-GHz synthesized spectrum analyzer ideal for field use. With a lightweight, compact size and threeway power supply including battery operation, the U3641/ 3641N has been designed specifically for field installation and maintenance applications. In addition, with the inclusion of a synthesized local oscillator, the U3641/3641N allows highprecision and high-stability measurements with a minimum resolution bandwidth of 100 Hz. A fast zero span sweep speed of 50 µs allows characterization of burst signal rising and falling edges and the measurement of power during on and off periods. The U3641/3641N are portable analyzers which can be used for maintenance on various aspects of CATV and PHS/PDC.
-
FACTORY OWNER RETIRES. NICE LIST OF TEST GEAR FOR SALE
Nice stuff by Tektronix, Hitachi, B&K etc. We would like offers on all or any part of this inventory.
-
LEADING BRAND NAMES OF TEST & MEASURING EQUIP. GAS DETECTORS, TEST TOOLS, CALIBRATION INSTRUMENT, RECORDERS DATA ACQUISITION. Brands like : DENT, FLUKE, MIRUS, ABRAXAS, AEMC, DYMEC, MTP, VAMP, TRANSCAT, ACR, DRANETZ BMI, GAUGETECH, BLUE LINE, ISA, CONZERV, SUMMIT. Contact us with part number / Model Number / Qty.
-
FLUKE 87-5 INDUSTRIAL TRUE RMS MULTIMETER !!!
Fluke FE87-5 new industrial true RMS multimeter.
-
0 TO 20VDC 10 AMP VARIABLE BENCHTOP POWER POWER SUPPLY
Variable test bench power supply delivers 0 to 20VDC at 10 AMPS continuous. Dual meters. Input 110VAC/60Hz. Input fuse protection. Short circuit protection with auto reset. Voltage surge protection. Low ripple. 9"W x 7"H x 11"D. Universal binding post terminals on the front panel. Weighs 20 pounds.