Test Equipment

Digital 3 in 1 multimeter combines functions of a multimeter, phone line tester & network cable tester. Features: 2 000 counts LCD display with automatic polarity indication, data hold function, continuity and diode test, white backlight, battery test: 1.5 / 6 / 9V, telephone line test, network cable test (RJ45). Power supply: 9V battery (incl.).

Local area network tester for telephone or network cables RJ12, RJ11, RJ10 and RJ45, and computer cables. Features LED indication, ability to test from distant or inaccessible areas, automatically runs all tests and checks for continuity, shorted & crossed wire pairs. Specs: - Tests: RJ-45, 10 base-T, Token Ring, RJ11/12 cables - Power supply: 9V-battery (not included)

Three models of reconditioned HP test equipment: - HP 8753C - 300 Khz to 6 GHz frequencey range, 1 Hz resolution, 100dB dynamic range, direct save/recall to external disc drive, time domain analysis, 0.001dB, 0.01 deg, 0.01 nanosec marker resolution, packaged w/HP 85046B S-Parameter - HP 8753D - 30 kHz to 6 GHz frequency range, up to 110 dB of dynamic range, w/S-Parameter & opt: 075 (75 ohm), 1-Hz resolution, save/recall to built-in disk drive - HP 8753E - 30 kHz to 3 GHz frequency range, 1 Hz resolution, w/S-Parameter & opt: 075 & 010 (Time Domain)

Qty x 2 Sunrise Telecom CM1000 signal meters. For impairment detection in analog, digital video, VOD, cable modem and VoIP services. Both units are in excellent condition come with one additional battery pack, cigarette lighter chargers, instructional CDs, and carrying cases. Quick specs: Continuous measurements reveal changing network conditions Integrated Web Browser and PC Emulation option VoIP option to verify, test and troubleshoot VoIP services Modular - easily upgradeable as requirements evolve realVIEW option provides access to remote upstream measurements Upstream spectrum with CPD, C/I & C/N measurements Comprehensive digital analyzer with constellation, equalizer and frequency response displays

Point the laser beam and presto, ultrasonics calculate the distance. Also calculates the area and the volume. 3' to 60' range. 0.5% accuracy. Big 1/2" LCD readout. Operates on 9V battery (not included). Size 2-3/4" x 5-3/4". Weighs 5 pounds. Utilizes 1 mW class 2 laser. 130' laser range. These operate on a 670nm wavelength. RoHS compliant.

Low cost insulated 60mhz scope probe. Attenuation 1:1 or 1:10, Bandwidth to 60mHz. 4 ft cable with BNC connector.

48" test leads. 4" handles with 1" prods. Red and black.

From manufacturers: WaveTek, Trilithic, Sunrise. Negotiable pricing. Click on MORE INFO to open this list.

HP 3555B Transmission Test Sets available in used condition. Can be sold as fully NIST calibration certified units for an extra fee.

Designed by electronics enthusiasts for electronics enthusiasts! Powerful, compact and USB connectivity. This sums up the features of this oscilloscope. The large keyboard and bright LCD makes this unit a breeze to use, combine this with great specifications and you'll wonder how you ever managed without it! For full spec, please click on the "more info" button.

Surplus Traders has an inventory of AMP connectors available. Please click the "more info" button to open the list. What other AMP products do you require or have to liquidate?

Used, tested HP 435B power meters available in excellent condition with warranty. Contact us for a quote today!

Tektronics 7904A oscillipscopes. Please contact us today if you require this unit.

Only 2 available. Manuufactured in 1991. Both tested and working properly. Acqusition cost was $35,000 ea. Offers?

Agilent HP 8902A measuring receiver. The HP / Agilent 8902A Measuring Receiver combines the capabilities of a frequency counter, distortion analyzer, modulation meter, attenuation receiver, and power meter to give complete, accurate characterization of cw and modulated signals in the 150 kHz to 1300 MHz frequency range. It accurately measures AM, FM, and Phase modulation and recovers the modulation signal. It measures the RF frequency, RF power, modulation frequency, and distortion at 400 Hz and 1 kHz. Post detection filters allow the user to accurately characterize the modulation. Options 030 through 037 permit adjacent-channel power measurements or carrier-noise measurements. For increased frequency accuracy, an optional high stability time base, option 002, is available. A built-in AM/FM Calibrator permits quick confidence checks of measurement accuracy. AM and FM accuracy is 1%. A built-in 50 MHz power reference ensures that the 11722A Power Sensor makes accurate RF power measurements.

Great for the test bench or lab. Input; 100VAC to 120VAC/60Hz. Output is variable from 4VAC to 130VAC at 1000VA. Has external fuse holder, on/off switch and analog voltage meter. Weighs 19 pounds.

Great for the test bench or lab. Input; 100VAC to 120VAC/60Hz. Output is variable from 4VAC to 130VAC at 2000VA. Has external fuse holder, on/off switch and analog voltage meter. Weighs 22 pounds.

Great for the test bench or lab. Input; 100 to 120VAC/60Hz. Output is variable from 4VAC to 130VAC at 3000VA. Maximum output current 30 amps. Has external fuse holder, on/off switch and analog voltage output meter. Output binding posts and On/Off lighted power switch. Weighs 28 pounds.

CMA Economical clamp-on meter. Test AC & DC volts, AC amps, Ohms and continuity. The CMA is a rugged and compact manual ranging analog clamp-on that is easy to read. Features include compact size, color coded scale plate, tear drop jaw design, pointer lock, recessed input jacks for safelty, fuse protection and 1 1/4 inch jaw opening. 150 units available

This very handy combination screwdriver/tester works over the range of 80 to 500 volts AC or DC. Use for testing ground lines, open or shorted circuits etc.

The electriciens "best friend". Tests 80-500 volts AC or DC. The 5" insulated leads with finger guard insulated tips make testing electrical circuits easy and safe. The neon bulb glows with increasing intensity as the voltage increases.

This test lead set consists of 5 color coded 16" test leads with miniature hook-on prods at both ends. A must for techs and experimenters who require temporary interconnects without danger of shorting. Red, black, yellow, green and white.

The kit includes; Two 42" flexible, vinyl-covered test leads, heavily insulated to prevent high voltage breakdown and cut-through. 80-strand copper conductors eliminate wire fatigue and assure long life. The kit includes adaptor accessories most often used by servicemen. This kit can perform virtually every test requirement. Each lead is attached to a 4-3/4" probe (1-red, 1-black). Banana plugs on each end have nickel-plated phosphor bronze springs to maintain rigid contact through many thousands of insertions. Heavy plated BRASS Adaptors-Color-coded Spade Lugs that are large enough for lab. instruments (up to 1/4" dia. center post). Test prod phone tips(0.180" dia.) Strong spring action alligator clips. NP phone tips.-not insulated. Each insulated adaptor completely covers banana plugs to eliminate accidental contact, avoiding shorts. Great for schools.

The most useful test leads yet devised. Use them in the conventional manner or adapt them to individual requirements. Tiny, sturdy, push-to-clip prods can be firmly attached to hard-to-reach components in chassis-whether large or small terminals. Clip-onto-component feature enables you to test parts for long periods without actually handling the test leads. Hands are free for other work. Each prod is connected with solderless, kinkless wire terminating in an insulated banana plug. A removable, nickel-plated phone tip (supplied) fits over the banana plug allowing the individual the option of using meters with either banana or phone tip jacks. Overall leads length is 36 inches. Two unbreakable high dielectric strength prods, black and red.