Pushbutton Switches

Press to complete circuit. 1-1/16" long. Mounts in .270" hole. Solder terminals. Complete with mounting nut and washer. Black button. Imported to save you money. Rated 110vac 1 amp.

Press to break the circuit. 1-1/16" long. Mounts in 1/4" hole. Solder terminals. Complete with mounting nut and washer. Black button. Imported to save you money. Rated 3A@125V.

Omron B3E1300 GREEN. LED indicator. 50ma / 24VDC capacity. 1ma, 5VDC minimum permissible lead, 100,000 ohm contact resistance, PC mount. These are missing the keycap covering the LED. 160,000 available.

Press to complete circuit. 1-1/16" long. Mounts in 0.270" hole! Solder terminals. Complete with mounting nut and washer. Red button. Imported to save you money.

McGill #2601-0041 momentary push button switch. 125/250VAC capable of up to 20 amps. Normally open. 12,000 available.

JUMBO PUSH-BUTTONS. Durable plastic S.P.D.T. momentary pushbutton switch frequently found in arcade games. Useful in any application requiring a large, rugged pushbutton switch. Button operates a 10 Amp snap-action switch. Plunger is 0.86" diameter. Bezel is 1.33" diameter. Threaded bushing is 1.1" diameter and will mount in panels up to 0.75" thick. Includes large plastic mounting nut. Available in two colors: Red/MC882 or Black MC883.

Cobra replacement part 083-038. 3/4" overall length. 6 pc board pins. As pictured.

Cobra 083-002. PC board surface mount. 9mm square body. Plunger height 12mm above PC board surface. 5 solder tabs.

Cobra part 083-050. As pictured. 4 leads. 6mm x 6mm. Tactile.

Handsome & Hardy. These SPST pushbutton switches mount in a 5/8" hole and can handle 3 amps at 125 volts. Three colors of buttons to choose from; Black/MF026, Red/MF027 or Green/MF028. Momentary contact - push to make.

APEM 8646AB. DPDT ON/ON alternative action pushbutton switch. Silver solder lugs. Rated 3A/250VAC, 6A/125VAC or 4A/30VDC. Over 3,000 available. POR

D.P.S.T. push-on/ push-off switch. Rated 12 Amp 125 /250 VAC. Snap-mounts in 0.7" x 0.55" cut out. Rectangular gray plunger, 0.85" x 0.61". Switch body extends 1.18" below mounting plane. 3/16" qc/solder terminals.

Heavy duty (50 amps) momentary push-button switch that is dust and moisture resistant. Rubber boot-nut is included for enhanced protection. Contacts are silver/copper for long life. 5/8"x32 mounting bushing 1/2" long. Push to complet circuit. Screw terminals. Reccomended for marine and vehicular applications.

Heavy duty 12VDC/30 amp SP3T push-pull switch. Mounts in .375" hole. Screw terminals. 3 position action. Recommended for marine, RV and vehicular applications.

Mounts in 1/2" dia hole. Overall length 3/4" Complete with mounting nut. Handles 1 amp at 125VAC. solder terminals.

Handles 0.5A/125VAC. SPST. Push to complete circuit. Fits in 3/16" dia hole. 13/16" overall length x 1/4" dia. Black button

Heavy duty chrome pushbutton switches. Push-On/Push-Off. 10 Amp/125VAC. They mount in 15/32" dia. holes. The thread length is 1/2". Two models to choose from; CLIC MORE INFO.

We have available, 4000 Knitter switches Model MPG206N still in original packaging that I we would like to liquidate in one lot. The spec for these switches can be obtained on the Knitter web page. These switches are located in South Africa. All reasonable offers considered.

Vandal resistant switches - four different models. Stainless steel. SPST, DPST and momentary contact. Current rating: 12A 250VAC DP, 13A 250VAC SP Insulation resistance: >20Meg Ohms Initial contact resistance: 100Meg Ohms @ 12VDC Dielectric strength (open contacts): >1000V for 1 min. Terminal material: copper alloy Contact material: silver alloy Body material: nylon 6.6 Actuator & bezel: stainless steel Terminal type: .187" quick connect STK # TYPE ACTION MOMENTARY ACTUATOR GD123 SPST On-Off N Stainless steel GD124 DPST On-Off N Stainless steel GD125 SPST On-Off Y-On Stainless steel GD126 DPST On-Off Y-On Stainless steel

Momentary push button snap action switches. Specifications: ELECTRICAL RATINGS: - 15A, 125-250V AC 65C, UL E91973 CSA LR98589-1 - 1/2HP, 125-250V AC, UL/CSA - 15A, 250V AC T125, VDE 4715UG MATERIALS: - Operating force (Nom): 280g (10 oz) - Endurance (Mech): >10'6 operations - Flame retardancy: UL 94 V2 - Actuator: nylon 6.6 - V stainless steel - Mounting bracket: nylon 6.6 - Contacts: fine silver u gap Click "more info" for additional specs.

Tamper-proof push button switch mounts in 16.0 mm (5/8") hole in panel up to .50" thick. Bushing and button made from nickel-plated brass. Features IP67 protection and illuminated ring around actuator. Can be used in both illuminated & non-illuminated application (12V DC LED.) RoHS compliant. Specs: - Contact rating: 3A @ 250V AC, 2V @ 24V DC - Electrical life: 50,000 cycles - Contact resistance: 50m-ohms max (initial) - Insulation resistance: 1,000M-ohms min @ 500V DC - Dielectric strength: 2,000V RMS 50 ~ +70º C - Operating temp: -20º ~ +70º C - Switching circuit: ON - ON (latching) - Torque: 5 ~ 14Nm max. applied to nut - Operating force: 5.5N max. Part# Type Action Actuator GD262 SPDT (ON) or (OFF) Brass w/red LED GD263 SPDT (ON) or (OFF) Brass w/green LED GD264 SPDT (ON) or (OFF) Brass w/blue LED GD265 SPDT Push ON/Push OFF Brass w/red LED GD266 SPDT Push ON/Push OFF Brass w/green LED GD267 SPDT Push ON/Push OFF Brass w/blue LED

Allen Bradley 800T-PT16 pushbutton switches. Colors: amber, green, red, white and blue.

Fully-shielded miniature push button switches feature complete IP67 protection, the top rating classified for the level of protection electrical appliances provide against the intrusion of objects, including dust and liquids. These are SPST with momentary (ON) - OFF action. RoHS compliant. Electrical & general specs: - Max. current / voltage rating w/resistive load: 400mA 32V AC-100mA 50V DC-125mA 125VAC. - Case: Thermoplastic UV94-VO - Contacts: Silver, gold plated - Terminal seals: Epoxy Available in four colors. Part No. Actuator color GE002 Red button GE003 Yellow button GE004 Green button GE005 Blue button Click "more info" for specs.

Fully-shielded miniature push button switches feature complete IP67 protection, the top rating classified for the level of protection electrical appliances provide against the intrusion of objects, including dust and liquids. These are SPST with momentary (ON) - OFF action, with LED in center of actuator button. RoHS compliant. Electrical & general specs: - Max. current / voltage rating w/resistive load: 400mA 32V AC-100mA 50V DC-125mA 125VAC. - Viewing angle of LED: 35º - Case: Thermoplastic UV94-VO - Contacts: Silver, gold plated - Terminal seals: Epoxy LED available in four colors. Part No. LED color Vf Typ. Vf Max. GE007 Red 2.1 2.6 GE008 Yellow 2.1 2.6 GE009 Green 2.0 2.6 GE010 Blue 2.8 3.2