Accessories

FLIR Temp and Humidity External Probe Model# MR11 - Get instant dehumidifier moisture readings, increase remediation work efficiency; pre-deploy sensors in dehumidifier exhaust Ducts and avoid need for extended acclimation times between measurements - Facilitates more accurate measurements; place sensor away from objects that may influence/ pollute the measurement - Use in locations where access is Restricted, E.G. Measure inside wall Cavity via small access hole - Better ergonomics; use standalone or with the included mounting Accessories, permanent mounting bracket and magnetic sensor mount TA52, or with the optional extension pole MR04

FLIR Protective Case for FLIR Moisture Meters (MR10-2) Model# MR10-2 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions.

FLIR Protective Case for MR77 for FLIR Moisture Meters Model: MR10 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. CASE ONLY - Does NOT include the equipment. Photo for illustration purposes only

FLIR Baseboard Probe for FLIR Moisture Meters Model# MR09 The MR09 Baseboard Probe is ideal for taking measurements in hard-to-reach areas. Probe behind baseboards, wall trim, and crown molding without requiring removal. Long, thin, flexible probes minimize needed space.

FLIR Hammer and Wall Cavity Probe Combo with Shoulder Bag for FLIR Moisture Meters Model# MR08 The MR08 Hammer and Wall Cavity Probe Combo is ideal for both hammer probe and wall cavity applications. The hammer probe has an additional handle on the bottom to add convenience for angled, horizontal, and inverted hammer-probing needs. The bottom handle can be unscrewed and used as a wall cavity probe to measure the moisture level of insulation within the wall cavity and can also reach the inside face of the exterior wall. You can also install the impact plate for use with a hammer to punch the extended pins through drywall.

FLIR Hammer Probe with Shoulder Bag for FLIR Moisture Meters Model# MR07 The MR07 Hammer Probe expands the functionality of your FLIR Moisture Meter by allowing you to take measurements in subfloor through carpet, hardwood flooring, and hard materials that are difficult to penetrate with a standard pin probe.

FLIR Wall Cavity Probe Model# MR06 The FLIR MR06 Wall Cavity Probe expands the functionality of your FLIR moisture meter by allowing you to easily measure insulation moisture levels within a wall cavity and the inside face of exterior walls. FLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.

FLIR Replacement Pins for MR77 (wide) 2.26~2.35 mm - includes (25) sets of pins Model# MR05-PINS2 Replacement Pins for MR77 (wide) 2.26~2.35 mm - Includes 25 Sets of Pins

FLIR Replacement Pins for MR77 (standard) 1.50~1.55 mm - includes (25) sets of pins Model# MR05-PINS1 MR05-PINS1: Replacement Pins for MR77 (standard) 1.50~1.55 mm - Includes 25 Sets of Pins

FLIR Impact Pin Moisture Probe for MR77 and MR176 Model# MR05 The FLIR MR05 upgrades your FLIR moisture meter to help you easily test for moisture in challenging spots—on rough or uneven surfaces, in corners, in hard woods or high-density materials, and even, with ease, in areas without a dry reference. Made with extra-durable pins and a metallic impact plate that can withstand hammering to drive pins into the hardest materials, the FLIR MR05 lets you tackle the toughest moisture-measurement challenges all day long. Key features include six additional sets of thick and thin pins, an external pin accessory for the FLIR moisture meter mount for extended reach, a 1/4"–20 integrated wrench on the cap to replace pins, a durable BNC connector, and a 2 m coiled cord.

FLIR Extension Pole for MR77 and MR176 Model# MR04 When connected to a FLIR Moisture probe such as MR05 Impact Pin Probe or MR06 Wall Cavity Probe, the MR04 allows the user to measure moisture in wood and other building materials in difficult to reach areas from a safe distance.

FLIR Replaceable External Moisture Pin Probe Model# MR02 Replaceable External Moisture Pin Probe for MR77

FLIR MR01-EXT Temp and Humidity Sensor with Extension Model# MR01-EXT Use for acclimation purposes, such as dryer/dehumidifier exhaust vents, and to extend the reach of the integral temperature/RH sensor on compatible FLIR moisture meters.

Charger for Zebra TC51 barcode scanners

FLIR Replaceable Temp/RH Sensor for FLIR MR77 and MR176 Model# MR01 The MR01 is a field replaceable temperature and relative humidity sensor designed specifically for use with select FLIR moisture meters. The sensor can be exchanged when needed to reduce downtime.

FLIR Remediation Kit - Includes FLIR E6xt w/ MR176 and MR08 Model# MR176-KIT6 Gain a competitive advantage with the advanced, affordable inspection tools in the FLIR MR176-KIT6. This kit includes the MR176, a powerful moisture meter with the flexibility to take either intrusive or non-intrusive measurements, and the E6, the ultimate thermal inspection tool for building, electrical, and mechanical applications. Easy-to-use, rugged, and field-ready, both tools are designed to help you find problems faster and give you that competitive edge. The kit also comes with a hammer/wall cavity probe combo for additional moisture measurement applications. Problem areas can’t hide TROUBLESHOOT MOISTURE PROBLEMS QUICKLY Easily investigate insulation and moisture issues using MR176’s pinless technology or external pin probe for both non-destructive and contact measurements. PROFESSIONAL THERMAL MEASUREMENT From the hot/cold-spot measurements to the emissivity controls, E6 has the features you need to accurately identify problems. UPGRADED PROBE ACCESSORIES Kit includes MR08 Hammer and Wall Cavity Probe Combo to meet advanced moisture measurement needs.

FLIR Imaging Moisture Meter Pro Kit - Includes: MR176 w/MR08 and MR01 Model# MR176-KIT5 Get greater flexibility and minimize downtime in the field with the FLIR MR176-KIT5. The MR176 helps you quickly target moisture issues with Infrared Guided Measurement technology, and has options to take either intrusive or non-intrusive measurements with its integrated pinless sensor and external pin probe. The kit also includes a hammer/wall cavity probe combo for additional measurement applications, and a replaceable temperature and relative humidity meter built with the same durability as the MR176 itself. Get more flexibility from your moisture meter ADDED CONVENIENCE FOR FAST MEASUREMENTS Automatically calculate environmental readings and a field-replaceable temperature and relative humidity sensor for quick and easy measuring. UPGRADED PROBE ACCESSORIES Kit includes MR08 Hammer and Wall Cavity Probe Combo to meet advanced measurement needs. CUSTOMIZE THERMAL IMAGES Select which measurements are integrated (moisture, temperature, relative humidity, dew point, vapor pressure, mixing ratio) and choose from one of four color palettes.

MR160-KIT5 FLIR Imaging Moisture Meter Pro Kit - Includes: MR160 w/MR08 Probe Model# MR160-KIT5 The FLIR MR160-KIT5 has all the tools you need to quickly locate and diagnose moisture issues. Featuring Infrared Guided Measurement (IGM™), the MR160 visually guides you to the problem so you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The kit also includes a hammer/wall cavity probe combo for additional measurement applications. Knowing where to look is half the battle IDENTIFY AND VERIFY WITH ONE TOOL Use the MR160’s built-in thermal imager to quickly locate moisture issues. Document all your results on one screen. TROUBLESHOOT QUICKLY Easily investigate any moisture issues with the MR160’s pinless technology, external pin probe, or the included hammer and wall cavity probes. PORTABLE, TOUGH, AND DURABLE Rugged design, small form factor, and internal rechargeable battery for convenience to carry with you.

Have the solution on hand TROUBLESHOOT QUICKLY Easily investigate insulation and moisture issues using MR160’s pinless technology or external pin probe for both non-destructive and contact measurements. POCKET-PORTABLE THERMAL IMAGING Find hidden hot spots, energy waste, structural defects, plumbing clogs, HVAC issues, and other problems with the FLIR C2. SAVE DATA FOR POWERFUL REPORTS Use both the MR160 and C2 to document thermal images and generate convincing reports with FLIR Tools software.

FLIR Professional Imaging Multimeter Kit includes: DM285-KIT + TA10-F + TA74 Model# DM285-FLEX-KIT The FLIR DM285-FLEX-KIT makes finding, measuring, and sharing problem hot spots easier and more efficient than ever. Use the unique features of the DM285 to quickly pinpoint problems, wirelessly transfer data, and streamline inspections with the new FLIR InSite™ workflow management tool. This kit also includes a TA74 flex current probe for taking measurements in tight spaces, a carrying case, and a rechargeable battery. The FLIR DM285 is a professional, all-in-one True RMS digital multimeter and thermal imager. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 x 120 FLIR thermal imager, the DM285 visually guides you to the precise location of an electrical problem without direct contact. You’ll pinpoint hot spots faster, safer, and more efficiently. The DM285 also helps streamline inspections by connecting wirelessly to FLIR Tools® app for uploading thermal images and measurement data. PINPOINT PROBLEMS QUICKLY AND SAFELY Find more work by visually identifying issues with IGM, and scan a panel or cabinet for hazards without direct contact. SOLVE CHALLENGING PROBLEMS EASILY Performs 18 DMM measurement functions to help you verify the most complex electrical issues with trusted readings every time STREAMLINED REPORTING AND SHARING Features Bluetooth METERLiNK® to wirelessly embed data into thermal images from FLIR infrared cameras, or instantly share readings with clients.

FLIR Professional Imaging Multimeter Kit includes: DM285 + TA04-KIT Model# DM285-KIT The FLIR DM285-KIT offers the professional tools you need for field electronics, commercial electric, light industrial, field service, and HVAC work. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 x 120 FLIR thermal imager, the DM285 visually guides you to the precise location of an electrical problem without direct contact. The DM285 also helps streamline inspections by connecting wirelessly to FLIR Tools or the new FLIR InSite™ workflow management app. The DM285-KIT comes with the TA04-KIT, which includes a LiPo rechargeable battery, an AC charging adapter with international AC inlet clips for wall outlets, and a quick start guide. The FLIR DM285 is a professional, all-in-one True RMS digital multimeter and thermal imager. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 x 120 FLIR thermal imager, the DM285 visually guides you to the precise location of an electrical problem without direct contact. You’ll pinpoint hot spots faster, safer, and more efficiently. The DM285 also helps streamline inspections by connecting wirelessly to FLIR Tools® app for uploading thermal images and measurement data. PINPOINT PROBLEMS QUICKLY AND SAFELY Find more work by visually identifying issues with IGM, and scan a panel or cabinet for hazards without direct contact. SOLVE CHALLENGING PROBLEMS EASILY Performs 18 DMM measurement functions to help you verify the most complex electrical issues with trusted readings every time STREAMLINED REPORTING AND SHARING Features Bluetooth METERLiNK® to wirelessly embed data into thermal images from FLIR infrared cameras, or instantly share readings with clients.

FLIR Professional Imaging Multimeter Kit includes: DM284 + TA04-KIT Model# DM284-KIT The FLIR DM284 is a professional, all-in-one True RMS digital multimeter and thermal imager ideal for field electronics, commercial electric, light industrial, field service, and HVAC work. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 × 120 FLIR thermal imager, the DM284 visually guides you to the precise location of an electrical problem without direct contact. You'll pinpoint hot spots faster, safer, and more efficiently. The DMM you can't afford to work without PINPOINT PROBLEMS QUICKLY AND SAFELY Find more work by visually identifying issues with IGM, and scan a panel or cabinet for hazards without direct contact. SOLVE CHALLENGING PROBLEMS EASILY Performs 18 DMM measurement functions to help you verify the most complex electrical issues with trusted readings every time BUILT TO LAST Durable and drop tested, DM284 features built-in worklights, large display screen, onboard laser pointer, and an intuitive user interface. The FLIR DM284-KIT offers the professional tools you need for field electronics, commercial electric, light industrial, field service, and HVAC work. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 × 120 FLIR thermal imager, the DM284 visually guides you to the precise location of an electrical problem without direct contact. You’ll pinpoint hot spots faster, safer, and more efficiently. The DM284-KIT comes with the TA04 accessories, which include a replacement battery door, an Li polymer rechargeable battery, an AC charging adapter with international AC inlet clips for wall outlets, and a quick start guide.

FLIR Industrial Thermal Imaging AC/DC Clamp Meter Kit with: CM275 and TA04 Model# CM275-KIT The FLIR CM275-KIT offers the professional tools you need for field electronics, commercial electric, light industrial, field service, and HVAC work. Through Infrared Guided Measurement (IGM™), the CM275 provides a reliable way to identify hot spots and overloaded circuits from a safe distance. Confirm your findings with the clamp meter’s wide range of functions plus temperature readings. The FLIR CM275 also provides wireless connectivity for direct connection to FLIR Tools™ or the FLIR InSite™ professional workflow management app. The CM275-KIT comes with the TA04 accessories, which include a replacement battery door, an Li polymer rechargeable battery, an AC charging adapter with international AC inlet clips for wall outlets, and a quick start guide. See more with your clamp meter TROUBLESHOOT FASTER, MORE SAFELY Quickly identify issues with IGM, without contact with panels, cabinets, or cluttered wires and cables that may present safety hazards. VERIFY PROBLEMS, VALIDATE HOT SPOTS Get accurate amperage and voltage measurements and center-point temperature readings. Also features a large display for data and image viewing. DOCUMENT AND SHARE RESULTS INSTANTLY Upload and organize electrical measurements and thermal images, share information with your team, and file reports while in the field.

FLIR 1000A AC/DC Clamp with IR and NIST Model# CM78-NIST The FLIR CM78 is a True RMS industrial clamp meter for the electrician who works on high-powered equipment and temperature systems and needs a safe, capable combination tool. An integrated IR thermometer provides fast non-contact measurements on panels, conduits, and motors. FLIR Tools Mobile connects the FLIR CM78 to your compatible smartphones and tablets via Bluetooth®, and METERLiNK® technology wirelessly integrates electrical readings on your infrared image with FLIR thermal cameras. >>> w/ NIST Calibration YOUR GO-TO ELECTRICAL COMBINATION TOOL A SAFE COMBINATION TOOL Combines a True RMS digital multimeter, non-contact clamp meter, and spot IR thermometer into one tool. ACCURATE MEASUREMENTS Take accurate AC/DC measurements safely and quickly on high-powered equipment or complex machinery, and verify readings with the Type-K thermocouple. REMOTE DIAGNOSTICS Features Bluetooth METERLiNK to wirelessly embed data into thermal images from FLIR infrared cameras, or instantly share readings with clients.