Accessories
-
FLIR TA72 Universal Flex Clamp Probe Accessory 10 in (25cm)
FLIR TA72 Universal Flex Clamp Probe Accessory 10 in (25cm) Model# TA72 The FLIR TA72 adds capabilities, simplifies challenges, and gives the best readings with your existing meter. Made with a narrow, 10-inch long flexible coil clamp and locking mechanism, the TA72 provides maneuverability and convenience to easily take measurements in tight or awkward spots. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.
-
FLIR TA70 Universal CAT IV Insulated Alligator Test Probe Clips
FLIR TA70 Universal CAT IV Insulated Alligator Test Probe Clips Model# TA70 Works with FLIR TA80 test probes. Complies with latest UL CAT IV/CAT III – 1000 V. Slide-on connection with finger guards.
-
FLIR TA60 Universal Thermocouple probe with adapter
FLIR TA60 Universal Thermocouple probe with adapter Model# TA60 Type K thermocouple temperature sensor. Can be used to measure temperature with many meters. Fast responding with a wide general-purpose measurement range. Safety-shrouded banana to banana connection
-
FLIR TA55 Universal AC Current Line splitter
FLIR TA55 Universal AC Current Line splitter Model# TA55 Provides easy and safe measurements of current and voltage from two or three wire outlets. Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground) for accurate current measurement. Dual ranges (x1 and x10) for higher resolution on low-amperage readings. Built-in recessed voltage testing inputs.
-
FLIR TA52 CM 7x Magnetic Meter Mount
FLIR TA52 CM 7x Magnetic Meter Mount Model# TA52 Securely mount your FLIR Clamp Meter to an electrical panel or other magnetic surface for convenient test probe measurements. The low-profile TA52 firmly attaches to the meter's tripod mount and stores easily.
-
FLIR TA50 Universal Magnetic Hanging Strap
FLIR TA50 Universal Magnetic Hanging Strap Model# TA50 Hang your meter on metal electrical cabinets – allowing you to focus on your testing. Magnetic strip designed for DM9x series multimeters or any meter that accepts a 1″ (25 mm) strap. Durable nylon strap. Securely fastens to the meter with an integrated mounting tab.
-
FLIR TA15 Universal Soft Sided Case
FLIR TA15 Universal Soft Sided Case Model# TA15 The FLIR TA15 is a universal, multi-compartment soft-sided case designed to protect and carry your FLIR clamp meter, flex clamp accessory, test leads, or any other tool you need on the job. It is recommended for use with any FLIR clamp meter and the FLIR Universal Flex Current Probe Accessory (TA72 or TA74). Two large instrument compartments. Removable hand strap. Quick-release belt clip. Convenient magnetic bag closure. Label/luggage tag window. Two durable side pockets (mesh/neoprene) **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**
-
FLIR TA14 Holster for TG165 Model# TA14 Add the TA14 clip holster to your belt to conveniently carry the TG165 Imaging IR Thermometer at your side – whenever, wherever – you need it. The multi-positional, durable and secure design makes it easy for you to quickly access the TG165 while on the job and free your hands for other tools
-
FLIR TA13 Protective Case for TG165
FLIR TA13 Protective Case for TG165 Model# TA13 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR Test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Fits the FLIR TG165 and accessories. Custom instrument compartment protects tools from extremes. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**
-
FLIR TA12 Universal General Purpose Accessory Case
FLIR TA12 Universal General Purpose Accessory Case Model# TA12 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Durable EVA protective case for general accessories. Internal flap with dual pockets separates additional storage compartments. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**
-
FLIR TA11 Protective case for CM7x and CM8x Series
FLIR TA11 Protective case for CM7x and CM8x Series Model# TA11 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Fits the FLIR CM7x and CM8x series of digital multimeters and accessories. Custom instrument compartment protects tools from extremes. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**
-
FLIR TA10-F Protective case for DM9x and TA72/74 or CM55/57
FLIR TA10-F Protective case for DM9x and TA72/74 or CM55/57 Model# TA10-F Made from durable EVA rubber, the TA10-F Protective Case shields against harsh environmental conditions and damage. It is exclusively designed for use with the FLIR DM92/DM93 Industrial Digital Multimeters, the FLIR TA72/TA74 Universal Flex Current Probe Accessories, and the FLIR CM55/57 Flexible Clamp Meters with Bluetooth. Form-fitting instrument compartment. Concealed zipper resists dirt. Resilient nylon carry strap. Rugged, non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**
-
FLIR TA10 Protective case for DM9x Series
FLIR TA10 Protective case for DM9x Series Model# TA10 Case made from durable EVA rubber. It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish. **CASE ONLY - DOES NOT INCLUDE OTHER ITEMS SHOWN IN PHOTO - PHOTO FOR ILLUSTRATIVE PURPOSES ONLY**
-
FLIR TA04-KIT Rechargeable Battery Kit for DM284
FLIR TA04-KIT Rechargeable Battery Kit for DM284 Model# TA04-KIT Rechargeable battery kit for the FLIR DM284, DM166, DM284, DM285 and CM275 with extended battery life. The TA04-KIT includes a FLIR DM284 replacement battery door, an Li polymer rechargeable battery, an AC charging adapter with international AC inlet clips for wall outlets, and a quick start guide. Running time of up to 12 hours. The following AC inlet clips are included: North America, Europe, UK, Australia, and Korea.
-
FLIR TA03-KIT AAA Universal Rechargeable Battery Kit
FLIR TA03-KIT AAA Universal Rechargeable Battery Kit Model# TA03-KIT Rechargeable battery kit for the CM174 Imaging 600A AC/DC Clamp Meter with extended battery life. The TA03-KIT includes 8 NiMH rechargeable batteries (2 sets), Charger and AC adapter with international AC inlet clips for wall outlets and a quick-start guide. The following AC inlet clips are included: N.America, Europe, UK, Austraila, Korea.
-
FLIR TA02 Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176
FLIR TA02 Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176 Model# TA02 ‣ Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176 ‣ 120V Power Adapter ‣ For TG165/167 MR60/160/176
-
FLIR MR-PINS6 6 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair
FLIR MR-PINS6 6 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair Model# MR-PINS6 ‣ 1 pair of 6" Pins ‣ Fits Hammer, Wall Cavity and Combo Probes ‣ Unibody construction vs. two piece ‣ Smaller diameter pins ‣ Sandblasted hardened steel ‣ Insulated with abrasion resistant coating
-
FLIR MR-PINS4 4 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair
FLIR MR-PINS4 4 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair Model# MR-PINS4 FLIR’s new insulated pins are smaller in diameter - requiring minimal force to drive the pins into a surface - resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improve d bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.
-
FLIR MR-PINS2-10 2 Inch Pins for MR06, MR07 & MR08 - Includes (10) pairs
FLIR 2 Inch Pins for MR06, MR07 & MR08 - Includes (10) pairs Model# MR-PINS2-10 • 10 pairs of 2" Pins • Fits Hammer, Wall Cavity and Combo Probes • Unibody construction vs. two piece • Smaller diameter pins • Sandblasted hardened steel • Insulated with abrasion resistant coating
-
FLIR MR-CABLE RJ45 to BNC Cable for FLIR Moisture Meters and Accessories
FLIR MR-CABLE RJ45 to BNC Cable for FLIR Moisture Meters and Accessories Model# MR13 RJ45 to BNC Cable
-
FLIR Replacement Temperature and Relative Humidity Sensor
FLIR Replacement Temperature and Relative Humidity Sensor Model# MR13 The FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there’s no clear presence of moisture, the MR12’s ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.
-
FLIR Ball Probe Moisture Meter Accessory
FLIR Ball Probe Moisture Meter Accessory Model# MR12 The FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there’s no clear presence of moisture, the MR12’s ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.