Top 100 Items

9VAC/1AMP. OEM AA-091A. (May also be branded Amigo AM-91000A) UL/CSA. 5.5/2.1mm barrel jack. Class 2.

Compact unit generates a 2300Hz tone at approx 85db. Unit is rated for 5 volt operation but has been tested on 12 volts (constant use for 8 hours) and functioned perfectly. Excellent as warning buzzers in automotive, motorcycle, robotic and hobbyist applications. Also a great addition to educational and science fair solar projects - a real attention grabber. Bent leads for quick PCB insertion - easily solderable or can be used with alligator clips. Draws only 30ma @ 5vdc. Click the more info icon for the full spec sheet.

This motor will operate on 3 to 6VDC. 3/4" diameter x 1-5/8" long (includes shaft). The shaft alone in 3/8" long x 1/16" in diameter. The face of the motor has two tapped screw holes (1/2" apart) for mounting. A fine quality little motor.

16VDC/700MA. Ktec KA12D160070046U Class2 wall transformer. CSA/UL approved. Output connector is 2.1mm x 5.0mm. Center pos. (Output cord is parallel wire so the connector can be easily changed) Individually cartoned.

Friwo FW7362/09 (p/n 1811466). 9VDC/3AMPS. Input 100-240VAC. 50-60Hz. UL/CSA, CE and 7 more approvals. Input prongs (USA and foreign) available. Output cable terminated in 2-pin socket. Made in Germany. Individually cartoned.

10.5VDC/4.5A. Friwo SDA5510 (122.0183.511-00). Input; 120-240VAC, 50/60Hz. UL/CSA/CE/GS/FC/DVE and other foreign approvals. 5"L x 1-1/4"H x 2-1/4"W. Has 4 rubber foot pads. Output cord is 6-1/2 ft long with line filter and terminated in a 2.1/5.5mm right angle barrel jack. Center positive. Easily removable circuit board (approx 4-3/4 x 2 x 1-1/8") can be used internally in special application projects. Utilizes an AC line cord terminated in a non-polarized "figure 8" socket. (not included). For US operation order our MB973 line cord. For operation in foreign countries we can help you find an appropriate line cord. Made in Germany. Individually cartoned.

2500 rpm fan draws only 120ma. Quality manufactured by Indek/Elina model KDA120925LB6P with 12" tinned leads. Brand new inventory in original packaging.

Nikon EH-61 set top switching power supply/camera charger. Input 100-240VAC/50/60Hz. UL/CSA/CE and other approvals. Delivers regulated 4.2VDC/1.5A. Filtered output cord terminated in right angle 4.0/1.7mm barrel jack (yellow tip) Center positive. Tiny size. Only 3"L x 3/4"H x 1-1/2"W. Complete with plug-in line cord. Made in Japan. Individually cartoned in original Nikon cartons.

We have some Sharp LQ6NC01 6", LCD screens in brand new condition available for immediate sale. These screens are labelled as Sharp LQ6NC01 however they seem to be an undocumented revision of this model number. The standard LQ6NC01 LCD uses a 20 pin flat ribbon connector for data and (2) 2 pin backlight connectors for lighting power. These undocumented units have a single 24 pin flat ribbon connector and (0) backlight connectors. Specs of original LQ6NC01 are available for review on request. Click MORE INFO for images of these displays. POR

Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. This is a great motor for modellers, robotics, science projects, etc. Bi-directional operation.

Mabuchi FC-130RF-VN054515. 5000rpm. A truly unique mini motor with ultra small, flat shaft allows construction of ultra miniature projects. Flat shaft allows easy attachment of accessories, etc. Click on the "more info" icon to see a detailed drawing - NOTE: shaft on units we are selling is much shorter than shown in the diagram... as per the photo on this web page. Designed for 12VDC operation in industrial heavy duty applications.

24VDC/2.92AMPS. Astec model AA22200. (A6291Z00JQ0AB) Input; 100VAC to 240VAC. 50/60Hz. UL/CSA. 5-1/8"L x 2-1/4"W x 1"H. Output cord is (approx 5.5 ft) filtered and terminated in AMP #206429-1 two pin male connector. (This seems to be a custom CISCO connector). Requires plug-in 3-conductor "Mickey Mouse" line cord (Stock number ME038).

12VDC/1.25AMP. Hard Electronics HDAD24W101. Input 110 to 240VAC. 50/60Hz. UL/CSA/CE/GS/CCC/PSE approved. 4-1/4"L x 1-1/4"H x 2-1/2"W. Output cord terminated with 2.5/5.5mm barrel jack. Center positive. Requires standard IEC line cord (not supplied - you can order our TH716).

5VAC/2AMP. Ultra Scoop MKA-48052000. Input 120VAC/60Hz. UL/CSA. 2-7/8"L x 2-3/16"W x 1-3/4"H. Although rated at 5vac, output volatge can be between 4.2 and 4.8 volts depending on line input voltage. Output cord terminated with 3.5mm mini phone plug. Output cord terminated with 3.5mm mini phone plug.

12VDC/2AMP & 5VDC/6AMP. Power House P/N 071-10007-000. Rev.B 6-1/2"L x 3"W x 1-3/4"H. Quality screw assembled case. Input; 100-240VAC. 50-60Hz. Output cable terminated in 4 contact AMP industrial grade socket. Connection diagram. Individually cartoned.

15VDC/2.7AMPS. Telxon model AD-740U-1150. Input; 100 to 240VAC, 50-60Hz, 0.4amps. UL/CSA/CE/GS/CB and other approvals. 4"L x 2-1/2"W x 1-5/8"H. Output cord terminated in 2.5/5.5mm barrel jack. Center positive. Requires standard IEC line cord. (not supplied). Made in Taiwan

Superred Model CHA8012BB-AH by Cheng Home Industries. High quality 12VDC 80 x 80 x 25mm... draws only 120MA and yet delivers approx 31CFM at 2500RPM. Unit is complete with vibration absorbing rubber "bumper" installed in screw holes. Equipped with 3rd wire and thermistor for speed control. Molex type 3 pin connector. UL, CSA, TUV.

18VDC/1 AMP. Aironet P/N 430-001995 Model AEC-T5718. 3-1/4"L x 2-1/2"W x 2"H. Input; 120VAC/60Hz. 30W. UL/CSA. 3-prong AC plug. Class 2. Output cord terminated with 3-pin Din plug. Pinout supplied. Made in China.

Input anywhere from 10VDC to 15VDC and this DC to DC switching power inverter delivers a regulated 19VDC at 3.16 amps. (60 watts) CE approved. Use to power laptops and other electronic devices in auto, boat or truck. Bears p/n SYD1109-6019. 2-3/4' input cord is terminated in a high quality cigarette lighter plug. 4"L x 1-1/4"H x 1-7/8"W. The 5' filtered output cord is terminated with a 6.5/4.35mm barrel jack with 1.4mm center pin and 12mm shank. Center pin is positive. Popular for use with Sony laptops. Made in China. Individually cartoned.

26VDC/1.3AMP Tecumseh #198-1-1 battery charger. for use with the Tecumseh rechargeable power lawn mower. Can be used with other devices. Input 120VAC/72 watts. CSA/UL. Class 2. Has green "ready" light and red "charging" lite. 5"L x 2-3/4"H x 3-5/8"W. Four molded legs. Screw together construction. 6' AC line cord. 5' output cable terminated in 2.5/5.5mm barrel jack. Center positive. Individually cartoned.

20VAC/750MA/230VAC. US ROBOTICS. Friwo FW 6798. (1.015.1204-A) Input 230VAC/50Hz. 19.4VA. Type #4 prongs (Shuko) Approved for use in 16 countries. 2-3/4"L x 2"H x 2-3/8"W. Screw together construction. 5' output cable is terminated in a 2.1/5.5mm barrel jack. Made in China. Individually cartoned.

Model FW 1299/15.0727. This is a high quality battery charger made for Harding Energy Inc. Can recharge either 4 x AA or 4 x AAA NiMH cells or any combination of those sizes. Charge rate is 250ma and maintenance (trickle rate) is 95ma. Ultra high quality unit manufactured in China to US specs. C-UL approved. Charge indicator LED displays on-charge and standby charging modes. Automatic Smart - Charge circuit converts from fast to maintenance charge. Batteries in photo are not included.

9VAC/1.9 AMP. Friwo #FW6798. UL/CSA. Input 120VAC/60Hz. 23VA. UL/CSA. Class 2. 3-3/4"L x 2-1/8"H x 2-3/8"W. Output lead is stripped & tinned. High quality screw assembled case.

Quality six foot European power cord. (011-00388-01) One end has the standard 2 prong European plug (standard 3/64" dia pins spaced 3/4") and the other end is terminated with a popular non polarized Panasonic type connector. Hard to find at any price. Bears 10 European approvals.