Industrial Equipment
-
VARIOUS SURPLUS INDUSTRIAL WIRE PROCESSING EQUIPMENT
Surplus wire processing equipment available from a factory shut down. -(2) Molex TM-40's (both have terminal heads installed) -(1) Kenco 3/K press by Tabor Ind. (has head installed) Photos available on request. Contact us for additional information or to make an offer on these machines today!
-
NAKAMURA-TOME TW-10MM CNC TWIN SPINDLE LATHE
Surplustraders has available a 1990 Nakamura-Tome TW-10MM CNC Twin Spindle Lathe with an updated 2010 with Fanuc Servo Motors 5S - Machine has a max Turning Diameter of 8.07", max turning length of 6.10" with spindle speeds of 55-5500 RPM comprising of 2 10HP spindle motors. Machine has a spindle bore of 2.05", a A2-5 spindle nose, and swing over slide covers of 8.27". QTY-2 12 station turrents with a distance between spindle turrent face of 11.61". Additional information: ATS Collet Chuck: 730ASB-H05 3JLS Assy, Collets: Hardinge 3J, Chip Conveyor. Additional pictures available upon request.
-
SCHLEUNIGER, CIRRIS AND OTHER INDUSTRIAL WIRE PROCESSING EQUIPMENT FOR SALE
Check out these surplus wire processing machines. All were working when removed from service. -(3) Cirris EasyWire 1000LC portable -(1) QuadTech Sentry 30A Hi-Pot tester -(1) Daniels (DMC) WA22 pneumatic crimp tool -(1) T&B TBM14M Hydraulic crimp tool Photos available on request.
-
SET OF SCHLEUNIGER BLADES FOR THE MP8015 COAX STRIPPER
Set of (4) Carbide Titanium coated MP8015 coax stripper blades. Pictures available upon request.
-
VIBE TECH VTHT-36120 VIBRATORY DEBURRING TUBS
Looking for offers on VTHT-36120 vibratory deburring tubs, specifications as follows: Channel Width: 36", Channel Length: 120", Channel Depth: 38", Work Capacity: 63.6. Motor Specifications: 25HP, 575V, 60Hz. 1760 RPM. With filter system, half inch thick rubber lining, control panel and 6 media barrels. Pictures available upon request.
-
MAC DUST COLLECTOR 36AVR7-STY3
MAC dust collector 36AVR7-STY3. Specifications: CFM: 3.3, Filter Area: 30 Sq Ft. Diameter: 28", Straight Side: 40", Conned Bottom: 17", Top Plenum: 12", Air Inlet: 4", Air Outlet: 4-1/2", Center Bottom Product Outlet: 10", Bag Filters: (7) 36" Long. Looking for offers.
-
PRECISION FREAS MECHANICAL CONVECTION OVEN 645
Send in you offers on the following Precision Freas Mechanical Convection Oven 645 Cat. No.: 51221140 with the following specifications: 230V, 4800 Watts, single-phase, 21 amps, 1/6 HP, 50/60Hz, chanber volume: 9.5 Cubic Feet/269 Liters, temperature: Amb + 15 C to 325, temperature control: Microprocessor, temperature display: 2-Line/4-Digit LED, dimensions: 19''L x 36"W x 24"H, weight: 415 lbs. Pictures available upon request.
-
PANEL AND RIBBON SLITTER LINES
Panel slitter has rthe following parts: - Diversified Systems (Alexander Machinery) Panel Slitter with unwind creel and let off with Dalmec shaft puller and 10 position wind-up - Electric panel with 6 drives for panel slitter motors - 10 Branson 2000BDC power units with rack tower - 10 Branson slitter converters, Alexander Machine Company W.O: 8320, 460V Ribbon slitter has the following parts: - 2 Dalmec 12" diameter roll creel and doffing hoists - 2 Independent Machine Company SmartWinders-2000 with 18 position transverse wider units with power units - Associated control panel and operator stations - 2 Splicing Tables with Operator Panels - 2 Branson 2000 bdc power units - 2 Branson slitting converters assembly, rewind units - 2 fabric pile calendar conditioning units - 2 vacuum assembly units for Smartwinder units Pictures available upon request. Looking for offers.
-
MOTOMAN UP20 ROBOT YASNAC XRC AND TWIN K6 ROBOTS YASNAC MRC WELDING CELL
Motoman UP20 robot Welding cell has the following parts: Robot Model Number: UP20, Type: YR-UP20-A02, 20kg payload, with Yasnac XRC UP20 controls type: ERCR-UP-A02 Twin Robot Model Number: K6+K6 with Yasnac MRC K6+K6 controls type: ENCM-RM Motoman Rotating Table: 6' x 4' Part specifications: UP20 Robot: Axes: 6, Payload: 44.9lbs, V-Reach: 116.02", H-Reach: 65.28", Repeatability: +-.0024", Robat Mass: 280lbs. UP20 Robot Motion Speed: S-Axis: 165 Degrees/S, L-Axis: 165 Degrees/S, U-Axis: 165 Degrees/S, R-Axis: 335 Degrees/S, B-Axis: 335 Degrees/S, T-Axis: 510 Degrees/S. UP20 Robot Motion Range: S-Axis: +-180 Degrees, L-Axis: 155-110, U-Axis: 210-80, R-Axis: +-190 Degrees, B-Axis: 230-50, T-Axis: +-360 Degrees K6+K6 Robot: Axes: 6, Payload: 13.23lbs, H-Reach: 52.05", Repeatability: +-.0039", Robat Mass: 180lbs K6+K6 Robot Motion Speed: S-Axis: 110 Degrees/S, L-Axis: 90 Degrees/S, U-Axis: 110 Degrees/S, R-Axis: 240 Degrees/S, B-Axis: 240 Degrees/S, T-Axis: 400 Degrees/S K6+K6 Robot Motion Range: S-Axis: +-340 Degrees, L-Axis: +- 240 Degrees, U-Axis: +- 270 Degrees, R-Axis: +- 360 Degrees, B-Axis: +- 270 Degrees, T-Axis: +- 400 Degrees Additional pictures available upon request. Looking for offers.
-
EL DISPLAYS BY PLANAR, SHARP, AND FANUC
Click on the "MORE INFO" icon to view this list of over 425 pieces of EL displays by Planar, Sharp, and Fanuc. EL displays are in pulled, tested working, and new condition. Looking for offers on quantity.
-
VAST LIST OF SURPLUS INDUSTRIAL EQUIPMENT AND PARTS
Click on MORE INFO to view this extensive list of industrial parts. Motors, gearboxes, sensors, modules, and much much more.
-
SCHLEUNIGER US2015 UNISTRIPPER BLOWOUT
Closeout of pulled, working Schleuniger US2015 UniStripper machines. Contact us to get a quote today. Photos available on request
-
CONDENSERS, HEAT PUMP CONDENSERS
AND PACKAGED UNITS
208/230VClick on MORE INFO to access this list of excess inventory of Midea 208/230V. 3 Phase industrial air conditioner equipment.
-
ALLEN BRADLEY
AND
MODICON
ELECTRONIC COMPONENTSClick on MORE INFO to view this list of input and output modules and other electronic components by Modicon and Allen Bradley.
-
MISCELLANEOUS SURPLUS ELECTRONIC MATERIAL
Click on MORE INFO to view this listing of electronic components by Allen Bradley, GE Fanuc, Fischer & Porter and other manufacturers.
-
SURPLUS INDUSTRIAL ELECTRONIC PARTS
Click on MORE INFO to view this listing of surplus parts by Allen Bradley, Fanuc, Siemens, and many other manufacturers.
-
MANUFACTURING MACHINERY BLOWOUT
Closeout lot of pulled, working manufacturing machinery. Looking to sell as complete lot. All reasonable offers will be considered. The lot includes: 4 pieces AMP 626 Pneumatic Tool System Power Unit Pneumatic Crimper 4 pieces AMP 856402-1 Bench Mount Assembly 1 piece AMP GTM 354500-1-V DB connector 1 piece EDAC 516-280-700 EDAC audio pin 4 pieces AVP BNC cable Test Panel 6 pieces AVP RJ45 Cable Test Panel 2 pieces Schleuniger MP8015 Coax Stripping machine 1 piece Speedaire 4B237 Electric Air Compressor 1 piece HP DesignJet 1050C High Speed Plotter
-
CNC, GRINDERS, MILLERS, SAWS, SHEARS, WASHING MACHINES, WELDING MACHINERY
Click the "MORE INFO" icon to view this list of surplus machinery such as tooling equipment, degreasers, grinders, millers, saws, shears, washing and welding machine from such manufacturers as Lagun, OmniTurn, Allied, Leadwell, Kira, Baron Blakeslee, Baldor, Hisey-Wolf, Dayton, Craftsmen, and more.
-
ARBOR, HYDRAULIC, MECHANICAL, PUNCH, STAMPING PRESSES
Click the "MORE INFO" icon to view this list of surplus arbor, hydraulic, mechanical, punch, and stamping presses from such manufacturers as Royersford, Dake, Greender, Goebel, Federal, Flexopress, Tabor Industries, Heim, Oak, and more.
-
LISTING OF SURPLUS
INDUSTRIAL EQUIPMENTThis list contains parts by Allen Bradley, Omron, Wago, Siemens and more. Click on MORE INFO to view the details.
-
NEW GENUINE CATERPILLAR FREQUENCY METER AND AMMETER
QTY-16 CAT P/N: 4W8647 frequency meters QTY-14 CAT P/N: 4W8637 ammeters Looking for partial or complete lot offers.
-
2250 PIECES NORTON CUTOFF WHEEL, P/N: 28573
QTY-90 Boxes of 25 each Norton Cutoff wheel, Part# 28573 3"x0.035"x 1/4". Looking for offers on quantity.
-
GE FANUC
VMIC VMIVME-7750-440 PENTIUM III PROCESSOR-BASED
VME SINGLE BOARD COMPUTERThe VMIVME-7750-440 is a full-featured Pentium III compatible computer in a single-slot, passively cooled, Eurocard form factor that utilizes the advanced technology of Intels 815E chipset running at a front-side bus rate of 133 MHz.866 MHz Pentium III socket 370 processor installed with passive heatsink128 Mbyte PC133 SDRAM using a single SODIMMInternal AGP SVGA controller with 4 Mbyte display cacheDual Ethernet controllers supporting 10BaseT and 100 Base TX interfaces Remote Ethernet booting.3 available.