LOGIN | MY QUOTES | WHOLESALER ACCOUNT

Call Us: 800-341-6468
PO Box 276, Alburg VT 05440


PROVIDER OF INDUSTRIAL PARTS - SURPLUS EQUIPMENT NEW AND REFURBISHED TECHNOLOGY - WHOLESALE B2B

  • Home /
  • Hardware and Tools

Hardware and Tools

The top layer of this section contains 28 items and was updated on June 28, 2017. You will find even more products visiting the following subcategories on your left.

Showing 1 to 24

Set Ascending Direction
per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

  • OMEGA HSTC-TT-J-24S-36 THERMOCOUPLE

    HErmetically sealed tip 1m /40" Thermocouple.

    ID: ZB860
    Available

  • API TECHNOLOGIES SPE56-706-003 D-SUB STANDARD CONNECTORS

    D-Sub Standard Connectors 9S FEMALE S/CUP 2 rows, Through Hole.

    ID: ZB861
    Available

  • LARGE LIST OF CATV INSTALLATION EQUIPMENT - NEW

    Click "More Info" to view this list of CATV equipment. You will find Fiber enclosures, cables assemblies, connectors, breakers, Taps, eqs, pedestals, wire and fiber optic cable, transceivers, antennas, and much more. Minimum order values may apply.

    ID: YD629
    Available

  • 3M HARD METRIC BACKPLANE CONNECTOR P/N: HSHM-S110A4-5AP1-TR40B

    QTY-780 3M Hard Metric backplane connector P/N: HSHM-S110A4-5AP1-TR40B. 2mm type A, 110 Signal contacts, 5 rows, right angle. Looking for partial or complete lot offers.

    ID: YD624
    Available

  • NEW SD7H15 SANDEN TYPE COMPRESSOR WITH CLUTCH

    QTY-50 New SD7H15 Sanden Type Compressor with Clutch (from SSB China). 6 groove, 125mm, 12 volt, Direct Mount, JD Head. Sanden 4883. Mack Truck # 206RD51M, 20514024. Looking for partial or complete lot offers.

    ID: YD531
    Available

  • QTY-50 (2500FT TOTAL) 50 FOOT ROLLS OF EATON AEROQUIP REFRIGERANT...

    QTY-50 (2500ft total) 50 foot Rolls of Eaton Aeroquip Refrigerant Hose P/N: GH134-6. Hose Size: #6. Looking for offers on quantity.

    ID: YD322
    Available

  • POWER AND HAND TOOLS, TEST EQUIPMENT, WIRE TESTERS, FIBER OPTIC T...

    Click on "More Details" to view this list of assorted test equipment and tools. You will find cutter presser, digital fiberscope, crimp tools, tools bags, torque wrenches, and much more. Some of the diverse manufacturers include: 3M, AFL, Allied Bolt, Apex Tool Group, Corning, Ericsson, Fluke, Gen...

    ID: YD501
    Available

  • SECURITY AND ALARM EQUIPMENT, POWER LINE AND PHONE PROTECTION PAR...

    Click on "More Details" to view this list of security and alarm equipment, power line, and phone protection parts. You will find data line assemblies, protection hardware, power line protection equipment, alarm modules, closures, fiber splice organizer, network interface devices, and much more. So...

    ID: YD499
    Available

  • LARGE LIST OF OUTSIDE PLANT EQUIPMENT - NEW

    Click on "More Details" to view this list of Outside Plant Equipment (OSP). You will find OSP cabinets, enclosures, splice closures, vaults, handhole parts, pads, fiber optic closures and accessories, conduit, innerduct, splicing supplies, fittings, pole line equipment, drop clamps and other insta...

    ID: YD497
    Available

  • CLEANERS, FILTERS, CABLE TIES, LABELING, WIRE MARKERS, FASTENING ...

    Click on "More Details" to view this list of different types of supplies. You will find Hand cleaners, air filters, cable caps, splicing supplies, cable ties and fasteners, heat shrink and wraps, solder, tape, labeling material, decals, wire markers, paint, hardware kits, shipping and packing mate...

    ID: YD500
    Available

  • LARGE LIST OF NETWORKING AND CATV EQUIPMENT - NEW

    Click on "More Details" to view this list of network and CATV equipment. You will find terminals, LAN switches, routers, transceivers, voice servers, media converters, network adapters and accessories, fiber optics parts and equipment, interface cards, coaxial attenuators, multiplexers, chassis an...

    ID: YD504
    Available

  • NEW POWER EQUIPMENT - BATTERIES, HARDWARE, BREAKERS, AND MORE!

    Click on "More Details" to view this list of Power equipment. You will find batteries, battery electronics and mounting hardware, terminals, cabinets, racks, cabling, power supplies, backup systems, rectifiers, circuit breakers, generator accessories, fuses, and much more. Some of the diverse manu...

    ID: YD498
    Available

  • COAX, CONNECTORS, GROUNDING BARS AND KITS, SPECIALIZED JUMPERS, H...

    Click on "More Details" to view this list of cable assemblies, connectors, jumpers, hardware and installation kits, adapters, splitters, couplers, duplexers, diplexers, even antennas. Some of the manufacturers include: Andrew, Commscope, Kenwood, Microlab, RF Industries, Times Microwave Systems, a...

    ID: YD505
    Available

  • NETWORK BAYS, RACKING HARDWARE, CABINETS, AND OTHER ACCESSORIES

    Click on "More Details" to view this list of network bays, racking hardware, cabinets, and other accessories. Some of the manufacturers include: Alcatel - Lucent, Anixter, Armor Metals, Central Steel Fabricators, Commscope, Cooper B-Line, Custom Cabinets & Racks Inc., Hubbell, Moreng Telecom P...

    ID: YD506
    Available

  • APPLETON PIN AND SLEEVE PLUG P/N: AP20044CD FACTORY NEW IN BOX

    QTY-8 Appleton connector (Pin and Sleeve Plug) P/N: AP20044CD. Rated at 200A, 4W4P, Style 1. Factory New in box. Looking for offers.

    ID: YD486
    Available

  • 3M STERI-VAC 8XL STERILIZER/AERATOR

    230V, 50/60 Hz 20 x 18 x 38 inch chamber (7.9 cubic feet) interior has holder for steri Gas canister single door with quarter-turn latch and release lever relative humidity monitoring and control; water reservoir aeration cycle begins after sterilization two temperature cycles, 55 and 37 °C ...

    ID: ZB527
    Available

  • 3M STERI-VAC 5XL GAS STERILIZER

    Top Unit is model 487BGP ET sterilizer/aerator and the bottom unit is 487AGP and is set up as a dedicated sterilizer. 17 x 33 x 15" interior has holder for Stri-Gas canister built in report printer warm and cool cyvle modes digital display of temp and pressure start cycle and stop buttons door...

    ID: ZB528
    Available

  • GRAINGER EQUIPMENT AND PARTS - NEW

    Click on "More Details" to view this list of over 120 unique Grainger parts all in New condition. You will such parts as: Connectors, Relays, Proximity Sensors, Push Buttons, Contactors, Contact Blocks, and much more. Looking for partial or take all offers.

    ID: YD343
    Available

  • QTY-37 (851FT TOTAL) 23 FOOT ROLLS OF EATON AEROQUIP REFRIGERANT ...

    QTY-37 (851ft total) 23 foot Rolls of Eaton Aeroquip Refrigerant Hose P/N: GH134-8. Hose Size: #8. Looking for offers on quantity.

    ID: YD321
    Available

  • ANDREW GROUNDING KITS, KENWOOD HANGER KITS, AND ROSENBERGER GROMM...

    QTY-66 Andrew Sureground grounding kit P/N: SG158-12B2U QTY-16 Andrew Sureground grounding kit P/N: SGL6-10BZ QTY-12 Andrew SureFlex 6FT Assembly 7/16 DM/DM P/N: L4A-PDMDM-6-USA QTY-20 Kenwood Butterfly Hanger Kit for 7/8" P/N: T9300MT78 QTY-10 Kenwood Universal snap-in hanger for 1/2" P/N: T9...

    ID: YD299
    Available

  • TIMERS, PUMP, CRIMPER DIE SETS, SOLENOID VALVES AND MORE

    6- Square D BB-129 Limit Switch 1- Tyco 90759-1 Pro-Crimp TL w/ die Min Universal 2- Tyco 58528-2 Pro Crimper Die Set Assembly 1- Parker D14AA1AKB Pump 1- Simplex 5041XS-WL-26D-41 Latch Set 1- Omron H5BR-B Timer 1- Ross W1613A2020 Solenoid Valve 1- Ross W1613C2020 Solenoid Valve 2- Moore Industrie...

    ID: YC910
    Available

  • QTY-30 EATON AEROQUIP REFRIGERANT HOSE P/N: GH134-8 - NEW

    QTY-30 Eaton Aeroquip Refrigerant Hose P/N: GH134-8 (14 feet, 8 inches long each). Hose Size: #8 with EZ-Clip Fittings and Hose Thermal Protector. Additional pictures available upon request. Looking for partial of complete lot offers.

    ID: YD269
    Available

  • NEW QUE 7H15 TYPE COMPRESSOR WITH CLUTCH P/N: QP7H15-0005

    New Que Compressors with Clutch P/N: QP7H15-0005. Cross reference Sanden SD7H15 4666 & 4667. Direct Mount, Clutch: 8 groove clutch 119 mm diameter, 12 volts. Rear Head Type: KCA. Connections: #8 & #10 Horizontal O-Ring with High Pressure Relief Valve. Additional pictures available upon request. Lo...

    ID: YD061
    Available

  • NEW O.E. DELPHI SP15 COMPRESSORS WITH 6 GROOVE CLUTCH P/N: 969622...

    QTY-10 New O.E. Delphi SP15 Compressors with 6 Groove Clutch P/N: 96962250 in factory packed trays. Applications: 2012-up Sonic 1.8 liter. Additional pictures available upon request. Looking for take all offers.

    ID: YD065
    Available

  • 7 ALLEN BRADLEY CENTERLINE MOTOR CONTROL CENTERS

    QTY-7 Allen Bradley Centerline Motor Control Centers. The condition is used but there is no major damage on these units just regular wear and tear. Two of them are one sided and the rest are double sided. Click on More Details to view the section list for each Centerline Motor Control Center. Units are lo...

    ID: YD198
    Available

  • LIST OF TEST EQUIPMENT BY DATRON, HP, ROTEK, TEKTRONIX, AND MORE

    Click More Details to view this list of test equipment by Datron, HP, Rotek, TEKTRONIX, and more. You will find such items as leak detectors, contact resistance test set, transformer ratiometer, function generators, oscilloscopes, signal analyzers, and much more. Goods located in Canada. Looking for offers.

    ID: YD200
    Available

  • ANDREW GROUNDING KITS, BUTTERFLY HANGERS, HELIAX CABLES - ALL NEW...

    Andrew Grounding kits, butterfly hangers, Heliax cables: QTY-44 P/N: 204989-3 QTY-2 P/N: 241088-3 QTY-16 P/N: 42396A-2 QTY-2 P/N: CSGL4-06B2 QTY-5 P/N: CSGL5-06B2 QTY-5 P/N: FSJ1-50A QTY-2 P/N: SG12-12B2U QTY-3 P/N: SGL4-06B2 QTY-3 P/N: SGL5-06B2 All new in factory packages. Looking for partial ...

    ID: YD152
    Available

  • 6,500 BANDING BRACKET SIMILAR TO PLP BANDING BRACKET 710010745

    6,500 banding brackets. Additional pictures available upon request. Looking for offers on quantity.

    ID: YD138
    Available

  • 10,000 STEREN 310-204WH WALL PLATE - NEW

    New in box Steren 301-204WH wall plates - 10,000 pieces available. Looking for offers on quantity.

    ID: YD070
    Available

  • 40 WATT PENCIL SOLDERING IRON

    The classic everday utility iron for students, repair techniciens and industry. So cheap it could almost be called disposable. Made in China. Blister packed. Imported for ongoing availability.

    ID: MD970
    In Stock: 49

  • DATEX OHMEDA EV AIR 03 AIR COMPRESSOR

    Front powered 120 VAC 60Hz Air In: 280-650 kPa Air Out: 280-650 kPa

    ID: ZB002
    Available

  • LED MAGNIFIER LAMP

    Swing arm magnifier lamp has 5 diopter lens, a lens cover when not in use. 110-120 vac @ 5w. Unit equipped with a 4 1/2 ft 2 prong power cord. Uses LED lighting. A quality product!!!

    ID: ZA956
    Available

  • PARTS BY ADC, ANDREW, COMMSCOPE, POWERWAVE, AND MORE!

    Connectors, entry ports, power distribution units, ground kits and more by ADC, Andrew, Commscope, Ericsson, Powerwave, RFS, and a few other manufacturers. Click on "More Details" to view the list of contents. Looking for offers on quantity.

    ID: YC968
    Available

  • SURPLUS SCREWS AND HEX NUTS FOR SALE

    Variety of HEX nuts and 4-40 Steel Round Head screws selling as complete lot. Screws: -32,000 4-40 Steel Round Head Ni Plated .230 long. Hex Nuts: -12,000 Pcs. Hex .365 Thickness .125 Thread 10-32 Steel Gold Plated. -4,800 Pcs. Hex .312 Thickness .143 Thread 10-32 Steel Ni Plated. -1,950 Pcs. H...

    ID: DC648
    Available

  • CUSTOM 2 1/8" CROCODILE CLIPS

    Custom manufactured crocodile clip with the following features: -2 1/8" long -top clip fits into bottom clip when closed -metal "tongue" cutout on top and bottom clip -2 teeth on front of clip -barrel end for banana plug, solder or crimp connection -jaws open 3/8" Bulk packed. 50,00...

    ID: DC664
    In Stock: 3

  • 3/4" LONG BANANA PLUGS

    Standard 3/4" banana plug with 6-32 thead and nut and solder lug supplied unassembled. Total length 1.5". Perfect for use with standard barrel ended alligator clips. Bulk packed. 5,000 available.

    ID: DC665
    In Stock: 3

  • OVER 100,000 HVAC, HYDRONIC & PLUMBING, MOTORS, AND REFRIGERA...

    Click on the "MORE INFO" icon to view this incredible list of over 100,000 HVAC, Hydronic & Plumbing, Motors, and Refrigeration parts such as A/C compressors, ventilation parts, ducting, grilles, pipes, dampers, tools, tubing, belts, drives, motors, blower kits and housings, chemicals, driers,...

    ID: YC905
    Available

  • SURPLUS INDUSTRIAL AND MECHANICAL HARDWARE

    Motor starters, lug kits, valves, heater coils, camlocks, relays, terminals, meters, solenoid valves, isolator kits, actuators, bearings, and much more. You will find manufacturers such as Copeland, United refrigeration, Mueller, Cromton, siemens, Sporland, Henry packless, Honeywell, Fafnir, NTN, and othe...

    ID: YC830
    Available

  • SEVERAL AIR COMPRESSORS FOR SALE FROM 5HP UP TO 100HP

    QTY-1 1984 Gardner Denver Electra-Saver II 75 HP Air Compressor, Control: W/D 201ECM544 120V/60Hz, Max Pressure: 110. Allis Chalmer Motor 75HP, 1760RPM, 460V, 175/87.5Amps, 3ph Tank By The Buckeye Boiler Company, Nat'l BD No: 550849. Hours: 22,202 QTY-2 1984 Ingersoll-Rand 15HP Reciprocating Air ...

    ID: YC886
    Available

  • ELECTRI-FLEX CO. EXTRA FLEXIBLE GALVANIZED STEEL CONDUIT 150’...

    QTY-160 1/2” Conduit (id .622-.624) Extra flexible galvanized steel conduit 150’ long, manufactured by Electri-flex co. Model SL-11. Looking for offers on quantity.

    ID: YC880
    Available

  • THOMSON TWN12OPN PILLOW BLOCK BEARINGS

    Pillow block bearings by Thomson, p/n TWN-12-OPN. 7" long with 3/4" round shaft for bearing. 75 units available. Click "more info" for photos.

    ID: GG154
    Available

  • TIMKEN BEARINGS AND ASSEMBLY SETS - NEW

    We have the following Timken bearing and assembly set: QTY-8 Sets Timken 95525-90040 Looking for offers on quantity.

    ID: YC824
    Available

  • LARGE AMOUNT OF BEARINGS BY FAF, SKF, MGM, NSK, NTN

    Click on the "MORE INFO" icon to view this list of FAF, SKF, MGM, NSK, NTN bearings. Looking for partial or complete lot offers.

    ID: YC820
    Available

  • NETWORKING PARTS & EQUIPMENT BY LUCENT, NORTEL, TELLABS AND M...

    Large listing of networking equipment such as cable assemblies, filter panel assemblies, power splitters and much, much more. New and refurbished stock. Click "more info" for complete list.

    ID: YC791
    Available

  • CABLE EQUIPMENT BY AMP, EDAC, AVP, BRADY, EXTRON, SPEEDAIRE, AND ...

    QTY-4 APM 626 Pneumatic Crimper QTY-4 AMP Bench mount assembly P/N: 856402-1 QTY-1 AMP GTM DB connection crimper P/N: 354500-1-V QTY-4 AVP Test Jigs for RJ45 QTY-4 AVP Test Jigs for BNC QTY-1 Brady T300 label printer QTY-25 Rolls of Brady cable labels 1" x 3.75" QTY-25 Rolls of Brady cable ...

    ID: YC754
    Available

  • 3M 1870 SURGICAL RESPIRATOR MASKS

    We have 35 cases available for purchase. Each case has 6 boxes containing 20 masks. Looking for a take it all offer.

    ID: GG859
    Available

  • JERGENS FORGED METAL CLAMP 19104

    One piece construction, heat treated and versatile clamping height. Bolt size 7/8. Maximum torque 500-760. 250 available

    ID: ZA703
    Available

  • BARRY CONTROLS 22005-15 ISOLATOR MOUNT

    For vibration and shock protection. Size 5 Ring and Bushing Ring Bushing Mounts Load Capacity Range: 4560 LBs, thickness 1.25 inch, mount size 1.00 inch. 1500 available

    ID: ZA704
    Available

  • PIHER 10K OHM TRIMMER CERMET 15T P/N: PTC10LV10-103A2020

    Piher 10K Ohm Trimmer Cermet 15T P/N: PTC10LV10-103A2020 new in original packaging (500/box). Over 20,000 pieces available D/C 00+. Looking for offers on quantity.

    ID: YC639
    Available

  • NEW OE BRISTOL 5 TON COMPRESSORS 772010-2020-00 (SHORT TYPE)

    QTY-9 Bristol 5 Ton (56,000 btuh) 3 phase 50/60 Hz Compressors (Short Type) P/N: 772010-2020-00, model: H22A563DBLA OC-18. Pictures available upon request. Looking for partial or take all offers.

    ID: YC627
    Available

  • GROUNDING

    All kinds of Grounding materials to choose from. From Clamps, lugs to staples! Our list is changing daily call us for a current availibility!

    ID: ZA564
    Available

  • TAPS AND ACCESSORIES

    From 2 port Taps to 4 port Taps, we have many Taps to choose from. Our list is changing daily call us for a current availibility!

    ID: ZA561
    Available

  • JENNY 5.5 PORTABLE COMPRESSOR – MODEL: K5HGA-8P

    Jenny 5.5-HP 8-Gallon Wheelbarrow Air Compressor model K5HGA-8P with Honda GX Series OHV Engine (8.9cfm @ 100PSI) features a heavy-duty single stage cast iron pump, belt drive design with a totally enclosed heavy-duty belt guard, special unloading valves to assist in motor starting, 8-Gallon wheelbarrow d...

    ID: YC609
    Available

  • HARDWARE

    HARDWARE products such as screws, washers, thimbles, straps by Maclean Power systems, Larson Hardware MFG, Allied Bolty and many more. Our list is changing daily call us for a current availibility!

    ID: ZA555
    Available

  • TOOLS TOOLS & TOOLS

    We have a variety of Tools to choose from. Too name a few Larson Electronics, Union Tools, Irwin Tools... Our list is changing daily call us for a current availibility!

    ID: ZA550
    Available

  • SURPLUS INVENTORY<BR>OF<BR>ISCAR CUTTING TOOLS

    Click on MORE INFO to see the list of surplus Iscar parts available. All of the inventory is unused and in its original packaging.

    ID: VA688
    Available

  • TYCO CRIMP TOOLS - ALL IN EXCELLENT CONDITION!

    Looking for quantity offers on the following Tyco crimp tools: QTY-9 Tyco P/N: 58704-1 Manual tool for shell connectors QTY-1 Tyco P/N: 58061-1 Head IDC MTA 156 C/Edge W/O TK QTY-2 Tyco P/N: 58372-1 Tool head assem 2MM terminater QTY-1 Tyco P/N: 58247-1 Head assem tool for MTA-156 RECP QTY-3 Tyoc P/N...

    ID: YC560
    Available

  • SURPLUS HARDWARE

    Large list of surplus hardware such as piping, connectors, studs, insulators and more. Click "more info" for complete list.

    ID: GE638
    Available

  • NAKAMURA-TOME TW-10MM CNC TWIN SPINDLE LATHE

    Surplustraders has available a 1990 Nakamura-Tome TW-10MM CNC Twin Spindle Lathe with an updated 2010 with Fanuc Servo Motors 5S - Machine has a max Turning Diameter of 8.07", max turning length of 6.10" with spindle speeds of 55-5500 RPM comprising of 2 10HP spindle motors. Machine has a spindle ...

    ID: YC530
    Available

  • 3M LCD TOUCH PANELS - NEW IN FACTORY BOX

    Looking for quantity offers on the following 3M LCD touch panels, all have a display resolution of 1024x1024; Operating Temperature Range:-40°C to +70°C; Supply Voltage Range DC:5V to 12V. QTY-10 3M P/N: 17-8931-225. Size:310.96mm x 547.86mm; Height:26.28". QTY-11 3M P/N: 17-9251-225. Size...

    ID: YC523
    Available

  • OVER 100,000 BEARINGS AND HOUSINGS!

    Click on the "MORE INFO" icon to view this list of over 100,000 bearings and housings in different sizes and types. Most of the bearings are Cyber brand made in China, a few are made in Taiwan. You will find agricultural bearings, corrison resistant bearings and housings, inserts, mastguide bearin...

    ID: YC491
    Available

  • TIMKEN, SKF, AND FAFNIR BEARINGS AND SEALS FOR SALE

    Factory new bearings and seals by Timken, SKF, and Fafnir. Click on the "MORE INFO" icon to view the complete list. Pictures available upon request. Looking for offers on the complete lot.

    ID: YC493
    Available

  • VAST LIST OF SURPLUS INDUSTRIAL EQUIPMENT AND PARTS

    Click on MORE INFO to view this extensive list of industrial parts. Motors, gearboxes, sensors, modules, and much much more.

    ID: VA661
    Available

  • 226902K11 BEARINGS EQUIVALENT TO 633089A / IR5053

    Russian bearings production of bearing P/N: 226902K11 equivalent to SKF 633089A or Torrington's IR5053. 180,000 pieces packed in 20 piece rolls, 1,440 pieces per box. Total weight 6,000Kg. Angular contact ball bearing rings, whole-row with two-point contact. Accuracy class 0, radial clearance group 0....

    ID: YC426
    Available

  • CABLE/PIPE FAULT LOCATORS NOW AVAILABLE! 3M DYNATEL MODEL 2273M

    3M Cable/Pipe Locator Dynatel model 2273M These units are designed for accuracy, speed and are more integrated than most locators on the market. Carry case and specification sheets included

    ID: FC271
    Available

  • 160 NEW, 9' G43 HIGH TEST PLATED TIE DOWN CHAINS WITH A PLATE...

    QTY-160, 9' G43 high test plated tie down chains with a plated hook AL1-AE001 (hook spec). Looking for offers on quantity

    ID: YC399
    Available

  • SOLDER SUCKER DESOLDERING PUMP

    Great aid in the repair shop. Lowest price!

    ID: ME382
    Available

  • PLATON VARIABLE AREA FLOWMETER

    We believe these to be Platon GTV variable area flowmeter. The calibration reads in cubic centimeters/minute (ATP) and the calibration goes from a low of 200 to 2000. These are brand new units in original factory cartons. Made in England. POR

    ID: GB278
    In Stock: 1

  • LUCENT BNJ82 SBEVM CARDS - 2 UNITS

    QTY-2 Lucent interface BNJ82 SBEVM Cards - CommCode: 109551168. Looking for offers.

    ID: YC372
    Available

  • CNC, GRINDERS, MILLERS, SAWS, SHEARS, WASHING MACHINES, WELDING M...

    Click the "MORE INFO" icon to view this list of surplus machinery such as tooling equipment, degreasers, grinders, millers, saws, shears, washing and welding machine from such manufacturers as Lagun, OmniTurn, Allied, Leadwell, Kira, Baron Blakeslee, Baldor, Hisey-Wolf, Dayton, Craftsmen, and more.

    ID: YC366
    Available

  • ARBOR, HYDRAULIC, MECHANICAL, PUNCH, STAMPING PRESSES

    Click the "MORE INFO" icon to view this list of surplus arbor, hydraulic, mechanical, punch, and stamping presses from such manufacturers as Royersford, Dake, Greender, Goebel, Federal, Flexopress, Tabor Industries, Heim, Oak, and more.

    ID: YC367
    Available

  • SURPLUS 3M PRODUCTS

    20 cases of 3M 5591S Thermally Conductive Interface Pad Sheet, 210 mm x 300 mm 1.0 mm. Each case has 40 sheets. 40 cases of 3M 7997MP Membrane Switch Spacer Single Coated Clear, 13x25 13.7 mil. Each case has 100 sheets

    ID: VA610
    Available

  • BEARING LOT - NEW UNUSED

    We have the following bearings available, looking for take all offers. QTY-2 FAFNIR BEARING # S1KDD7 QTY-1 TIMKEN BEARING #LM29749 QTY-1 TIMKEN BEARING # 1780 QTY-1 SKF BEARING #02878 QTY-1 TIMKEN BEARING#LM29710( CONE) QTY-1 TIMKEN BEARING #LM29710 QTY-1 TIMKEN #2720 QTY-1 JM CLIPPER OIL SEAL N#...

    ID: YC326
    Available

  • PIPE FLANGES<BR>AND<BR>FITTINGS

    Click on MORE INFO to access this large list of various pipe flanges and fittings. These items are out of a plant storeroom and are new/unused. To be sold as one complete lot only.

    ID: VA606
    Available

  • VERMONT AMERICAN 23159 1/2-BY-1-INCH FLUSH TRIM ROUTER BIT, 1/4-I...

    1 2'' flush trim. 1 4'' shank. Carbide tipped. Razor sharp cutting edges are diamond honed for satin smooth cuts. Optimized hook and shear angles for faster chip clearance and quicker feed rates. Precision ball bearings with dust shields for long lasting performance. Triple tempered shanks...

    ID: VA599
    Available

  • SERVER CHASSIS

    The following Chenbro server chassis are available at surplus prices:Qty. 75 - RM41648-820RGB - 4U 48 bay chassis (head)Qty. 53 - RM23424-820RGB - 2U 24 bay chassis (head)Qty. 40 - RM234-820RGBJR - 2U 24 bay chassis (jbod)Qty. 13 - RM13914-500RZGB - 1U 10 bay chassisQty. 10 - RM416-820RGBJR - 4U 48 bay ch...

    ID: VA594
    Available

  • BEARING LOT FOR SALE

    Looking for offers on the following bearing lot: QTY-450 - P/N: SMR148-ZZ (8x14x4) QTY-2,390 - P/N: SMR106 (6x10x2.5) QTY-1,000 - P/N: SMR137-ZZ (7x13x4) All new in original packaging. Send in your offers today.

    ID: YC252
    Available

  • LOAD OF MOORE INDUSTRIES EQUIPMENT - SURFACE MOUNTS, PRESSURE CON...

    We have a load of Moore Industries Equipment for sale. This load includes: 7 Racks IPT-DIN 5position surface mounts 9 IPT2/4-20MA/3-27PSI-FA7 pressure controllers 7 Mc Daniel Controls PSI gauges

    ID: FC177
    Available

  • RIESTER KOMPRIMETER PNEUMATIC TOURNIQUET

    The Riester Pneumatic Tourniquet is a reliable medical tool which is used during amputations to restrict blood circulation in the limbs. It has a robust and very accurate manometer to provide exact measurements and a particularly long service life. This unit includes: Sturdy metal pump to produce...

    ID: FC176
    Available

  • CHEAP 2" ALLIGATOR CLIPS

    Standard clip with barrel for banana plug. Solder or crimp connection. Solder hole. 2" long with jaws that open 3/8" Bulk packed. Factory excess - may have slight variances in the plating. Highly negotiable on large quantities!

    ID: TS845
    Available

  • PNEUMATIC AIR HOSES

    5 Schrader extension hoses 1 Micro Aire / 3M Mini 1 Micro Aire 9013-000 1 Depuy Aire hose Can be sold individually or as a lot.

    ID: FC070
    Available

  • SURPLUS HOSES AND FITTINGS

    List of industrial and hydraulic hoses and fittings - over 1400 line items. Looking for partial or complete lot offers. Click "more info" for complete list.

    ID: YC094
    Available

  • PNEUMATIC MEDICAL EQUIPMENT FOR SALE

    We have the following medical pneumatic equipment. Hall 5067-04 Trauma Drill Micro-Aire 1400-000 Reciprocating Saw Micro-Aire 1220-000 Saggital Saw Units are tested and working. Contact us today with your offers.

    ID: FC053
    Available

  • 800 TIMKEN BEARINGS AVAILABLE!

    QTY-800 TIMKEN #9278 bearings all in new condition. The engraving on the bearings say Timken R 9278 USA TS. Additional pictures available upon request. Click MORE INFO for manufacturer's specification sheet. Contact us today with your offers on this lot.

    ID: YC048
    Available

  • ASSORTED ALLIGATOR CLIP HANDLES

    Plastic holders that fit on the end of standard alligator clips. 4 styles to choose from, all bulk packed. Color Size(inch) Qty Black 0.600 16,000 Black 0.750 10,000 Red 0.600 43,000 Red 0.750 5,000

    ID: DC670
    In Stock: 12

  • SPECIAL 2" ALLIGATOR CLIPS FOR PHOTO PROCESSORS

    Special aligator clip with small plastic blue "gavel" handle and jaws that open 3/8". Perfect for handling items that cannot be touched like photos, and other items, covered in chemicals. Bulk packed. 250,000 available.

    ID: DC663
    In Stock: 3

  • CHEAP 2" ALLIGATOR CLIPS

    Standard clip with barrel for banana plug. Solder or crimp connection. Solder hole. 2" long with jaws that open 3/8" Bulk packed. Imported for ongoing availability.

    ID: MC932
    In Stock: 3

  • CELL TOWER TOOLS & EQUIPMENT - OPTIMIZERS, CONNECTORS AND MOR...

    Lot of tools and equipment for cell tower work. Snap-in hangers, 1/4" jumpers and many other items by such manufacturers as Kenwood and Andrew. Click "more info" for complete list of items offered in this lot. Looking for offers on the complete lot.

    ID: GG510
    Available

  • CELL TOWER TOOLS & EQUIPMENT BY KENWOOD, RFS, ANDREW AND MORE

    Lot of tools and equipment for cell tower work. AISG RBT assemblies, T&B lugs, female DIN connectors and many other items. Click "more info" for complete list of items offered in this lot. Looking for offers on the complete lot.

    ID: GG513
    Available

  • CELL TOWER TOOLS & EQUIPMENT - 3/4" ROPE, GROUND LINES, E...

    Lot of tools and equipment for cell tower work. Climbing harnesses, 15" orange cones, hoisting grips, coax connectors and many other items. Click "more info" for complete list of items offered in this lot. Looking for offers on the complete lot.

    ID: GG514
    Available

  • CELL TOWER TOOLS & EQUIPMENT - LUGS, WORM GEAR CLAMPS AND MOR...

    Lot of tools and equipment for cell tower work. Pipe mount kits, grd lug kits and many other items by such manufacturers as Andrew and RFS. Click "more info" for complete list of items offered in this lot. Looking for offers on the complete lot.

    ID: GG511
    Available

  • CELL TOWER TOOLS & EQUIPMENT - 1" CABLE, EXTENSIONS LADDE...

    Lot of tools and equipment for cell tower work. Cisco MAXRAD antenna tester, heavy duty extension cords, stripping tools, hardware and many other items. Click "more info" for complete list of items offered in this lot. Looking for offers on the complete lot.

    ID: GG515
    Available

  • CELL TOWER TOOLS & EQUIPMENT BY WIRELESS SOLUTIONS, RADIO FRE...

    Lot of tools and equipment for cell tower work. Optimizers, butterfly hangers and more. Click "more info" for complete list of items offered in this lot. Looking for offers on the complete lot.

    ID: GG512
    Available

  • CELL TOWER TOOLS & EQUIPMENT - SHELF SUPPORTS, BRACKETS, STRI...

    Lot of tools and equipment for cell tower work. Universal ground bar kits, primer spray, power drills and many other items. Click "more info" for complete list of items offered in this lot. Looking for offers on the complete lot.

    ID: GG509
    Available

  • METAL BASE SUB-MINIATURE TOGGLE SWITCH BOOT

    Sub-miniature toggle switch rubber boot with metal base screws onto toggle switches with 10- 48 UNS threads bushing. Sold in packages of two.

    ID: GG357
    Available

  • TOGGLE-SWITCH RUBBER BOOT

    Durable rubber boots fit over toggle switches. Two sizes. Part No. Tread size GG324 15/32-32 GG325 M12 x 1.0

    ID: GG323
    Available

  • SURPLUS BEARINGS BY HEIM & NHBB

    33 units of surplus bearings by New Hampshire Ball Bearing and Heim. All new in original packing and original boxes. Qty 14: REP5 M6 FS464 RBC Rod End Bearing, 3/8-24 UNF, 0.25 ID, Right hand thread, Ms21151-8 Qty 6: REP4 ML6 FS464 RBC Rod End Bearing, 3/8-24 UNF, 0.25 ID, Left Hand Thread, MS21151-9 Q...

    ID: GG318
    Available

  • SURPLUS CLAMPS

    Thousands of surplus clamps: Qty 5,500: marine gear clamps 5/8 - 1-1/2 Qty 675: 175-187 T-bolt clamps 6-28/32 to 7-12/32 Looking for partial or complete lot offers!

    ID: GG306
    Available

  • DOUBLE-ARTICULATING ARM WALL MOUNT BRACKET

    VESA 100/200 compatible LCD double-articulating arm wall mount bracket. Tilt: +/- 45º. Fits monitors 15"-22" up to 66 lbs.

    ID: GG228
    Available

  • VESA COMPATIBLE 30º TILT WALL MOUNT BRACKET

    VESA 50/75/100/200 compatible LCD wall mount bracket for monitors 15"-32". Weight limit: up to 66 lbs. +/- 30 degree tilt.

    ID: GG229
    Available

  • UNIVERSAL CEILING AND WALL-TYPE PLASMA & LCD TV MOUNTING BRAC...

    Plasma and LCD TV mounting brackets hold up to 165 lbs. Click "more info" for complete list of styles available. Minimum order quantities apply.

    ID: GG218
    Available

  • ADJUSTABLE TV WALL MOUNT BRACKET - 14" - 32"

    14" to 32" adjustable plasma TV/LCD monitor wall mount brackets for VESA 200 mounts. 77 lb. weight capacity, safety locking system and 5º - 15º adjustable tilt. Minimum quantity order values apply.

    ID: GG157
    Available

  • ARTICULATING ARM PLASMA TV/LCD MONITOR WALL MOUNT BRACKET

    Articulating arm wall mount bracket for plasma TVs and LCD monitors. VESA 50/75/100/200 compatible, tilt +/- 20º. Weight limit: up to 66 lbs.

    ID: GG158
    Available

  • MINING EQUIPMENT - LOAD CENTERS, FANS AND MORE

    Transformers, load centers, MSHA approved fans and more, for use in the mining industry. For complete list of inventory available, click "more info.

    ID: GG081
    Available

  • EXTENSIVE LIST OF<BR>FUSES, HEAT SINKS<BR>AND<BR&g...

    A large listing of fuses, heat sinks, integrated circuits and more. Click MORE INFO to view the entire list. Minimum order requirements may apply.

    ID: VA396
    Available

  • VESA COMPATIBLE LCD TV WALL MOUNT BRACKETS

    VESA 100x100, 100x200 and 200x200 compatible LCD TV wall mount bracket with 2-piece "slide-in" installation for quick & easy mounting. For monitors 17" x 37" w/max. weight of 66 lbs. Ball design allows for easy tilt, swivel & rotation. Vertical tilt: +/- 15º, horizontal swivel...

    ID: GF827
    Available

  • LCD TV WALL MOUNT FEATURES BUILT-IN BUBBLE LEVEL

    This VESA 75x100 compatible LCD TV wall mount bracket has a built-in bubble level and ball design for easy tilt, swivel and rotation. For monitors 13" x 27" and max. weight of 44 lbs. Vertical tilt +/- 15º, horizontal swivel 60º. Two-piece "slide-in" installation for easy mountin...

    ID: GF828
    Available

  • ULTRA-SLIM LCD TV WALL MOUNT BRACKET

    Intall 37" to 63" LCD monitors only 3/4" from the wall (19mm). 2mm cold rolled steel construcion with sliding adjustable arms that hold a maximum weight of 165 lbs. Max. VESA 800x400. Matte black finish with built-in Spirit Level and safety bar. Max. hole pattern: 824mm W and 410mm H. Includes...

    ID: GF800
    Available

  • LCD TV WALL MOUNTS

    VESA 75 x 75, 100 x 100 compatible aluminim die cast LCD TV wall mounts for monitors 13" x 24". Max. weight: 33 lbs, black matte finish. Swing arm design for easy tilt/swivel adjustment. Horizontal swivel: 108º, vertical tilt +/- 70º. Has slotted mounting holes on faceplate & cable m...

    ID: GF799
    Available

  • CARBIDE INSERTS

    Over 400 carbide inserts by Valenite, Summitomo and more. Click "more info" for complete list.

    ID: GF778
    Available

  • SURPLUS ELECTRICAL GOODS BY LEVITON, PHILLIPS, GE SYLVANIA AND MO...

    Switches, motors, pilot lights, thermostats, adaptor kits, clamps, conduits and much, much more in this extensive list of items by Hubbell, Thomas & Betts, Leviton, Trademaster and many more. Looking for offers on complete lot. Click "more info" for detailed list. (Items with an *asterisk* are...

    ID: GF777
    Available

  • THREADED METAL INSERTS WITH DIAMOND KNURL

    450 pcs of Type B threaded metal inserts with coarse diamond knurl. Brass construction. Diameter over knurl. 766. Length .875. US ID tolerance +.0015 / -.0000 after tapping .430. Holes tapped through entire length and burnished after tapping. Click "more info" for schematics.

    ID: GF671
    Available

  • 1.5 INCH RUBBER ISOLATION MOUNT

    Rubber vibration foot mount - round cupped rubber mount with plated metal insert. Outer diameter: 1-1/2", inner diameter: 3/4". Inside depth: 11/32", overall height: 5/8". Bolt hole: 1/4" (bolt not included.)

    ID: GF677
    Available

  • RAMSET REDHEAD DRILL BITS

    Over 2,500 pcs - Ramset Redhead SDS carbide tip drill bits for concrete/masonry. 18" long with 16" of usable length. Quantities, part numbers and sizes as follows: Qty 900: 33-1016 - 1" Qty 450: 33-7816 - 7/8" Qty 50: 33-3416 - 3/4" Qty 225: 33-5816 - 5/8" Qty 900: 33-1216 - 1...

    ID: GF662
    Available

  • LARGE LIST OF SURPLUS ELECTRONIC COMPONENTS

    Click on MORE INFO to view this list of electronic components by 3M, Amphenol, Axon, ITT Cannon, National Semiconductors, Schneider Electric, Tyco, and many others. Minimum order requirement may apply.

    ID: VA362
    Available

  • SURPLUS ELECTRONIC COMPONENTS

    Click on MORE INFO to view this list which contains a large variety of excess inventory of ABB electronic components that we have available. Minimum order requirement may apply.

    ID: VA360
    Available

  • CRIMPING AND CUTTING TOOLS

    Hand crimp tools and rope cutters by Tyco, Delphi and more. Click "more info" for list and photos.

    ID: GF468
    Available

  • SURPLUS METALWORKING PARTS

    Click on MORE INFO to view this list of assorted Kennametal metalworking parts. Minimum order requirements may apply.

    ID: VA343
    Available

  • LUGS BY BURNDY, PANDUIT AND T&B

    Over 1,000 lugs by Burndy, Panduit and T&B. These are new, but no longer in original packaging. Click "more info" for complete list.

    ID: GF461
    Available

  • TIMKEN BALL BEARINGS<BR>AND MORE.........

    This list contains various bearings by Timken, Bower, SKF, Koyo and more, Click on MORE INFO to view the list in it's entirety..

    ID: VA327
    Available

  • DOOR HANDLE MOUNT ELECTROMAGNETIC LOCK KIT

    Compact locking device - secure doors with no moving parts. 900 lbs. holding force. 12 or 24VDC power, 2 wire operation

    ID: GF316
    Available

  • T-TOOL FOR ASSEMBLY OF "F" CONNECTORS

    Finger saving tool for assmebly of twist-on or crimp-on "F" connectors.

    ID: GF209
    Available

  • ADJUSTABLE "F" CONNECTOR TOOL

    Professional adjustable compression connector tool for "F", BNC and RCA. Hand adjustment for different length connectors. Works with T&B Snap-N-Seal, Augat, Paladin SealTite, & AIM CATV F weatherproof connectors. Heavy-duty steel construction.

    ID: GF208
    Available

  • ELECTROMAGNETIC LOCKS FOR OUTSWINGING DOORS

    This is a top jamb mounting lock designed for doors that swing outward. 2-wire operation; built-in release timer, 1,200 lbs. holding force. 12 or 24VDC power. 10 1/2" x 1 5/8" x 2 5/8". Optional Z-bracket allows use on inswinging doors - ask for GF157.

    ID: GF156
    Available

  • ELECTROMAGNET LOCKS FOR OUTSWINGING DOORS

    Top jamb mount lock that is only 1.5" x 6.5" x 7/8" in size. Ideal for such applications as cabinets and tool bins. 300 lbs. holding force, 2-wire operation, 12VDC power.

    ID: GF158
    Available

  • ELECTROMAGNETIC LOCK - FLUSH MOUNTING

    Recessed locking device, mortises into door frame for inconspicuous security. 600 lbs. holding force; 12 or 24VDC power; 2 wire operation. Requires 8 1/2" x 1 9/16" opening.

    ID: GF155
    Available

  • ROSIN CORE LEAD-FREE WIRE SOLDER

    Activated rosin core solder wire developed for general hand soldering applications that specify compliance to J-STD-004 ROM1. 96.5 tin/3.0 silver/0.5 copper alloy. 2.2% of flux. Part No. Gauge Diameter Roll size GF127 21 .032 1 lb. GF128 21 .032 1/2 lb. GF...

    ID: GF126
    Available

  • QUALITY SILVER SOLDER

    Formulated for use with gold and silver-plated contacts, this alloy consists of 62% tin, 36% lead and 2% silver. 21 gauge, .032 dia. in. Part No. Flux Roll size GF108 RA300 1 lb. GF109 RA300 1/2 lb. GF110 NC601 1 lb. GF111 NC601 1/2 lb.

    ID: GF107
    Available

  • SURPLUS MILLING AND TURNING TOOLS

    Click MORE INFO to view the entire list of surplus Kennametal products that we have available.

    ID: VA320
    Available

  • LARGE LIST OF SURPLUS STEEL STAMPS

    This list includes a large variety of CMT steel stamps used to mark identification on equipment. Click MORE INFO for details.

    ID: VA319
    Available

  • 3-PIECE COAXIAL TOOL KITS

    Cut, strip and install easily with these 3-piece coaxial tool kits for RG58, RG59, RG62, RG6 & center pin. Comes with carrying case. Part No. Installs GF049 RG58, RG59, RG62 GF050 RG58, RG59, RG62, RG6

    ID: GF048
    Available

  • EVERGOOD 105 SERIES PUSH LOCKS

    400 units of Evergood 105 series push locks. Cylinder & inner core are zinc alloy. Cylinder: D19 L23mm. Finish: Chrome, black nickel, brass, gold plated. Accessories: 2 keys K1034; 1 rosette A1051. 6 wafers - 400 key changes. Key alike can be made on request, master key system available on request. Cl...

    ID: GF046
    Available

  • 5J2449 HYDRAULIC CYLINDER BY CATERPILLAR

    We have one Caterpillar hydraulic actuating cylinder, model 5J2449. We can get you a great price on this part! Click "more info" for photos.

    ID: SB135
    Available

  • SOLDERING & TOOL KIT

    Handy little soldering & tool kit includes: UL approved 30 watt soldering iron, solder aid tool, one package of .062" solder, needle nose pliers, and a 4-1/2" diagonal cutter.

    ID: GF033
    Available

  • "NIBBLING" TOOL CUTS ANY SIZE OR SHAPE!

    Hand-operated unique tool can cut metal and non-brittle plastic in any size or shape starting from edge or from 3/8" inside hole. Cuts up to 18 gauge, copper, brass, aluminum and plastics up to 1/16".

    ID: GE999
    Available

  • 20 PIECE DELUXE COMPUTER TOOL KIT

    Deluxe tool kit contains everything needed to add/remove parts, peripherals and printed circuit boards. Comes with black vinyl zipper case, 13" x 7-1/4" x 1-3/4" when folded. Includes: 1/4" nut driver, 3/16” nut driver, #0 and #1 Phillips screwdrivers, 1/8" and 3/16" standard ...

    ID: GE997
    Available

  • PERSONAL COMPUTER TOOL KIT

    Complete kit for servicing plus adding peripherals & printed circuit boards to your PC and come in a compact, padded vinyl zipper case. Kit includes: 1/4" and 3/16" nut drivers, T-10/T-15 reversible torx driver, 14-16 pin I.C. inserter, #1 Phillips screwdriver, 3/16” slotted screwdriver, ...

    ID: GE998
    Available

  • TEKTRONIX OSCILLOSCOPES AND EQUIPMENT

    Tektronix oscilloscopes and controller. All power up and seem to be in working condition. Looking for offers on the entire lot. Models and quantities as follows: Qty 1 - model 5113 duel beam storage Qty 1 - model 5A14 four channel amplifier Qty 1 - model 5A18 dual trace amplifier Qty 1 - model 5812 du...

    ID: GE804
    Available

  • 350 BRAND NEW KOYO #6912/4BC3 BEARINGS FOR SALE

    We have 350 Koyo bearings available. Brand new in original packaging. They are packed 70 per box. The part number is Koyo 6912/4BC3. Made in Japan. POR

    ID: MG564
    Available

  • SNAP-TITE MALE COUPLERS BPGFN8-8F

    525 new Snap-Tite 1/2" male couplers, p/n BPGFN8-8F. These are the nipple pieces only, as pictured. Selling as one complete lot.

    ID: GE580
    Available

  • V-BELTS BY PIX, JASON AND MORE

    V-belts for industrial use by such manufacturers as Pix, Jason, Browning and more. Click "more info" for complete list.

    ID: GE573
    Available

  • HTD BELTS BY AMETRIC, GATES AND MORE

    HTD belts for industrial use by such manufacturers as Gates, Ametric, C&B Canada and more. Click "more info" for complete list.

    ID: GE574
    Available

  • VARIABLE SPEED BELTS

    Variable speed belts for industrial use by such manufacturers as Browing, Dayco, Goodyear, Metric and more. Click "more info" for complete list.

    ID: GE572
    Available

  • INDUSTRIAL MACHINE TIMING BELTS BY GOODYEAR, DAYCO AND MORE

    Timing belts for industrial machines by such manufacturers as Gates, Ametric, Goodyear and more. Click "more info" for complete list.

    ID: GE560
    Available

  • BARRIER STRIP HARDWARE - .187"

    .187" barrier strip hardware. Click "more info" for complete list with diagrams.

    ID: GE487
    Available

  • BARRIER STRIP HARDWARE - .250"

    .250" barrier strip hardware. Click "more info" for complete list with diagrams.

    ID: GE495
    Available

  • SOLDERING STATION WITH LCD DISPLAY

    60W, CUL approved soldering station has LCD display that monitors current and set temperatures. Heating element uses low voltage AC current for anti-static, low-leakage and interference. Unit has 3 preset buttons to configure a preferred temperature quickly, and ergonomic handling for longtime usage. Inpu...

    ID: GE147
    Available

  • SOLDERING STATION W/LCD & CERAMIC HEATER

    Soldering station with LCD display w/digital temperature scale and temperature preset. On/off switch, manual temperature setting and ceramic heating element w/temperature sensor. Max. heater power for soldering iron: 48W. Temperature range: 302 - 842°F. Low-voltage iron: 24V AC. Standard tip incl.

    ID: GE142
    Available

  • LUG NUTS - TRUCK CONICAL SEAT

    Lug nuts in two sizes: 7/16" and 9/16". Sold in sets of 4 pcs. 50,000 sets available.

    ID: GE097
    Available

  • SOLAR ACCESSORY KIT

    Connect multiple solar panels and inverters safely and quickly with this handy solar accessor kit. Includes: voltage tester w/LED, 12 V DC plug, female socket connector, barrel connector, battery clamps and an extra 12 feet of wire.

    ID: GE091
    Available

  • THERMALLOY HEAT SINK FOR TO-220 DEVICES

    Brand New! Black anodized high quality Thermalloy 529802B02500 heat sinks for TO220 devices - designed for vertical mounting with solderable pins. For larger quantity price call Ted at 800-341-6468. Size: .72" x .125" x 1.50". Click the "more info" icon for the full spec sheet.

    ID: TH755
    In Stock: 13

  • USED TOOLS SUCH AS RIVET/WELD SHAVERS, PULLING TOOLS AND AIR TOOL...

    Loads of used tools in great condition, previously owned by an aircraft contractor. Includes such items as a Zephyr ZT570C super rivet / weld shaver with 3/4" carbide cutter, steel nose piece and stabiliser feet (pictured); Atlantic air tool co alligator rivet squeezers s/n 60 sr008079; Cherry g747 pu...

    ID: GE015
    Available

  • THE BIG BLUE SOLDERSUCKER

    This item is an imported copy of a favorite American solder removal tool, effective and economical for use in desoldering rework.

    ID: GD667
    Available

  • VACUUM SOLDER REMOVAL TOOL

    One hand operation makes removal of molten solder from p.c. boards easy. Nose is removable for easy clean-out. All-metal construction.

    ID: GD533
    Available

  • PNEUMATIC PARTS BY BINKS, WILKERSON AND MORE

    Pneumatic parts and equipment - hoses, valves and regulators by such manufacturers as Norgren, Numatics and Nibco. Click "more info" for complete list.

    ID: GD522
    Available

  • 6" DIGITAL CALIPER WITH LARGE SCREEN

    Superb precision caliper can measure up to 6" with a resolution of 0.0005". Read-out in inches or mm on a large 5-digit LCD display. Stainless steel. Battery included

    ID: GD460
    Available

  • PRECISION DIGITAL CALIPER

    This digital caliper can masure up to 6" with resolution of 0.0005". Read-out in inches or mm on a 5-digit LCD display. Battery included. Packaged in blow molded case.

    ID: GD456
    Available

  • LAMP WITH 5 DIOPTRE MAGNIFYING LENS

    Lamp with 5 dioptre lens (magnification 2.25 x) is great for precision applications at work and home. Uses 22W circular fluorescent tube and had clamp for easy table-mounting. White. (Also available in black - order GD357.)

    ID: GD356
    Available

  • 3M 11-4922-505-00 TOUCH SCREEN MONITORS

    3M 11-4922-505-00 touch screen monitors. Flat panel 15" TFT, resolution 1280 x 1024. Dot Pitch: 0.3 mm, color depth: 24-bit (16.7M colors).

    ID: NA008
    Available

  • FISH TAPE

    Fish tape w/dispenser - 100 ft. Used for pullinh wires & cables inside walls and conduits & between floors. Steel tape construction with ergonomic sturdy plastic hand grip. Retracting trigger for fast rewinding. 1/8 " W x 100' L.

    ID: GD332
    Available

  • PUNCH DOWN TOOLS

    Punch down tools for installation of telephone systems and computer networking systems. Impact and non-impact available. P/N USEAGE FUNCTION GD210 Non-impact for 110 style Punch & cut GD211 Non-impact for 66/110 style Punch only GD212 Non-impact for 66 styl...

    ID: GD209
    Available

  • ELECTRONIC TEMPERATURE-CONTROL SOLDER STATION

    Temperature controlled solder station. Special electronic circuit enables user to change tip temp from 300ºF (150ºC) to 790ºF (420ºC) without need to change tip or heating element. Temp is maintained within +/- 10ºF of present temp. Unit tip is isolated from the AC line by a trans...

    ID: GD166
    Available

  • CRIMPING TOOL KIT

    Crimping tool kit for network cables. Includes: LAN tester, telecom impact tool, coax cable stripper, coax cable stripper/cutter, crimping tool for connectors 6PC, 8PC (RJ12, RI45), and 45 modular plugs - 15 x 6P4C, 15 x 6P6C, 15 x 8P8C.

    ID: GD162
    Available

  • COAX TOOL SET FEATURES CUTTER, SCREWDRIVER AND MULTIPLE DIES!

    Coax tool set includes: 1 cable cutter (up to 10.5mm), 1 coax stripper, 1 mounting screwdriver, and 1 crimping tool with set of 5 dies: - Die 336A4, for: RG58, 59, 62, 140, 141, 142, 210, 223, 174, 303, 400, Fiber Optic, BELDEN 8279 - Die 336C, for: RG6, 59, 62, 140, 210, BELDEN 8279, 55, 58, 141, 142, ...

    ID: GD155
    Available

  • LOW COST 50 WATT SOLDERING STATION

    Low-cost soldering station - 50W 374-896ºF. Features: manual temp setting, electronic temp control, power-on LED, ground output. Specs: - Heater power for soldering iron: 50W - Temperature: 374-896°F - Voltage supply: 115VAC - Input power: 50VA max.

    ID: GD156
    Available

  • 3.5MM STEREO FEMALE FEED-THRU

    3.5mm stereo female feed-thru. All metal construction. Mounts in 3/8" (.375") hole in panel up to 0.20" thick. 1.42" in length. Choice of gold or nickel plating, nut & lock washer included.

    ID: GD146
    Available

  • ELASTIMOLD LOADBREAK ELBOWS

    Elastimold 1602A3R4BG loadbreak elbows. 6 units - brand new in package.

    ID: GD114
    Available

  • OMNIMOUNT TILT FLAT-PANEL MOUNT

    1000 brand new OMNIMOUNT 2N1-M wall mounts for 26 inch to 37 inch flat screens. Fixed and tilt for multiple viewing angles. These retail at over $40.00 ea. Take all.

    ID: VA089
    Available

  • OMNIMOUNT WALL MOUNTS

    500 OMNIMOUNT 4N1-M wall mounts for 23 inch to 37 inch flat screens. Tilt, pan and swivel for maximum flexibility. Retails at over $80.00 each. This offer is for the complete lot only.

    ID: VA087
    Available

  • BURNDY LUGS

    New & unused Burndy lugs. Three types: Q3A34-4N - 6 pcs Q2A34-2N - 26 pcs QA40-B - 43 pcs Send offers. Click "more info" for pictures.

    ID: GD087
    Available

  • COVALENCE ELECTRICAL TAPE

    Covalence B17 colored electrical tape. 3/4", 7 mil thickness, 66 ft. per roll. In brown, gray, green, orange, red, white and yellow. Individually wrapped.

    ID: GD090
    Available

  • ELLIOTT CENTRIFUGAL COMPRESSORS

    Elliott centrifugal compressors. 16800cfm, Model 50P, w/Electric Motor, Ideal, 1000hp, 4160V, 1780rpm, 118A, S/N 8508, Gearbox, Lufkin, & CO2 Blower, N1200C, Ratio 4.317:1. Two units. Click "more info" for pictures.

    ID: GD046
    Available

  • IBM RACK STORAGE

    10 units of IBM 3531-1RU-01 EXP 300 - U160 SCSI LVD rack storage.

    ID: GD039
    Available

  • BRAND NEW BROOKS TEMPORARY POWER METER ADAPTERS

    Over 3900 Brooks temporrary power adapters as used by construction companies for quick and inexpensive hookup to power lines. Ideal for use in disaster relief areas. Brand new inventory, never used. The 3900 pcs includes 3 models: TMP4335-STD, TMP2751 and TMP4751. The majority will be the TMP4535-STD. Eas...

    ID: TS670
    Available

  • BRACKET, CABLE BRACKET 6" W/ SCREW P/N: CAB4105ZY (ZINC YELLO...

    Cable bracket 6" with screw by Central Steel Fabricators P/N: CAB4105ZY. 1,000+ units available. Minimum order quantities apply.

    ID: YB824
    Available

  • SURPLUS ELECTRICAL COMPONENTS AND MECHANICAL HARDWARE

    Click on MORE INFO to review this healthy list of electrical components and mechanical hardware. Heat shrinks, pole mounts, connectors, cabinets, power supplies and more more more. Some items in the tens or hundreds of thousands.

    ID: SB022
    Available

  • METAL DOWEL PINS

    38 packages of 500 each, metal dowel pins, 2.5mm x 30mm. ISO 8752-st. DIN 1481. Click for a larger view.

    ID: SA949
    Available

  • POWER TOOL BATTERIES FOR SALE

    Click the "more info" button to access this healthy list of power tool batteries from the industries biggest names.

    ID: SA852
    Available

  • 4-40 BH X ¼ ELECTRO LESS NICKEL PLATED SCREWS

    Our reader writes; "We had a program go obsolete and have 1,253,700 4-40 BH X ¼ electro less nickel plated screws that we would like to get rid of. I see on the internet these are often used for models, hobbies, RC cars and such. Please click the image above for a more detailed view, and click th...

    ID: MG614
    Available

  • 3M 11-4922-129-00 TOUCH SCREEN MONITORS

    3M 15" TFT LCD touch screen monitors, p/n 11-4922-129-00. Max. Resolution: 1280 x 1024, Dot Pitch: 0.3 mm, color depth: 24-bit (16.7M colors).

    ID: WB424
    Available

  • 100,000 DIN404 FASTENERS FOR SALE

    FASTENER – M5 X 16mm slotted drilled fillister head machine screw zinc plated – qty 100,000 pcs. DIN # 404 – lockwire head. Offers considered for the lot.

    ID: MG604
    Available

  • PNEUMATIC PARTS & EQUIPMENT

    Please click the "more info" button to open this varied list of pneumatic parts & equipment. Brands such as: BUILD, ALPHA TECHNOLOGIES, LLC, VALLEY INDUSTRIES, BRASSCRAFT, ALKON CORPORATION, GRUNER BRASS FITTINGS CORP, MIDWEST CONTROL DEVICES and so much more. Items such as: valves, manifold...

    ID: SA762
    Available

  • OVER 30 TONS OF NEW WRENCHES FOR SALE

    Surplus Traders has 30 tons of surplus new wrenches available for sale. They come in all sized and shapes. All are in inches from various companies such as Walter, Williams, Snap-On, etc. Some come in Manufacture packaging. Goods are located in Israel and selling by the ton. Minimum order is 5 tons. We ar...

    ID: YB215
    Available

  • TEKTRONIX 7904A OSCILLOSCOPES

    Tektronics 7904A oscillipscopes. Please contact us today if you require this unit.

    ID: DC460
    Available

  • VICKERS HYDRAULIC VALVES AND GSI LUMONICS INDUSTRIAL LASER

    We have some Vickers hydraulic valves for sale: -100 pieces of Vickers 02-119475 DG4S4-0160C-U-B-60 Pilot Valve -100 pieces of Vickers DG4V-3S-6C-M-U-B5-60 Solenoid Valve -100 pieces of Vickers DGMDC-5-Y-PK-30 Direct Check Valve -100 pieces of Vickers DGMX2-3-PP-CW-S-40 Pressure Reducing Valve We als...

    ID: DC455
    Available

  • SURPLUS DEALERS WORLDWIDE

    If you have a web site offering surplus items or mail out "surplus" catalogs we have a warehouse full of great new surplus items for you. Contact me today and get on my "insiders" list for samples of new items. Ted Duskes, Surplustraders.net TEL: 514-739-8723, FAX; 450-902-0495.

    ID: MG037
    Available

  • BAG OF 100 SADDLE TIES

    Hundreds of uses. Every shop can use these!

    ID: TS491
    Available

  • 3M SURGICAL EQUIPMENT

    Surplus Traders has available, the following 3M Brand medical/surgical equipment: 3M SARNS W/AIR HOSE GREAT WORKING CONDITION!, model STERNALSAW, and 3M Surgical MAXI-DRILL SET L-300, model L300MAXIDRIVE.

    ID: SA590
    Available

  • DIAMOND WHEELS TO BE LIQUIDATED

    Click the more info icon for the list.

    ID: TS461
    Available

  • ASSORTED MANUFACTURING PARTS TO BE LIQUIDATED

    Click the more info icon for the list. All parts are new, unused.

    ID: TS462
    Available

  • GREAT DEAL ON PLASTIC WHEELS

    3000 Plastic wheels for sale. wheel Size: 15 1/4" x 1 9/16", Hub size: 3 1/4" Bearing size: 3/4" (there are two of these in each wheel) Weight: 5.35lbs Spokes: 6 (typically there are only 5 spokes),Rating: 300lbs plus Plastic composite.Quantity: 3,000

    ID: YB606
    Available

  • SOLDERING IRON STAND

    Prevent fires. Use a soldering iron stand. Comes with sponge to wipe tip.

    ID: MG508
    Available

  • SOLDER IN A TUBE

    60% tin and 40% lead. Very handy, easy to work with.

    ID: MG490
    Available

  • 6 TUBES OF CYANOACRYLATE SUPER GLUE.

    So inexpensive that you can use a single tube for a single job. Not necessary to try and seal and save the small quantity left. Very quick bonding. Bonds plastic, metal, rubber, leather, glass and ceramics. You get a card of 6 tubes.

    ID: MG487
    Available

  • GIANT TWEEZERS

    Don't you sometimes wish you had a set of these? Over 10" long they will enable the user to get into places not possible before.

    ID: MG489
    Available

  • RUBBER HANDLE GRIP

    Ribbed black rubber handle grip designed to slip over a 1" diam. tube. 1 1/2" diam. x 4" grip width. Also includes a bag of 1/4" bolts with nylon insert lock nuts. 500 available. New.

    ID: MG447
    Available

  • GOVERNMENT SURPLUS 3/32 X 41" CABLE SLING

    3/32"X41" Cable Sling. New government surplus. 3/32" dia 7x19 Galavanized Aircraft Cable with thimble swaged onto each end. Approx. load capacity 800 lbs. 41" between thimble ends. Maximum opening in thimbles 5/8". Shpg 1/4 lb. 700 available.

    ID: MG448
    Available

  • 49" THROTTLE CONTROL CABLE WITH T-LEVER

    Throttle-control cable with control handle assembly. Friction in handle assembly holds cable position. Two handle detent positions. Hooked cable end. 0.05" dia. cable in 0.2" O.D. steel jacket. 1-7/16" total pull distance. 49" max. cable length. Overall handle size: 3-1/2" x 1-7/8"...

    ID: MG444
    Available

  • THROTTLE CONTROL CABLE WITH HANDLE

    New throttle-control cable with control handle assembly. Friction in handle assembly holds cable position. One handle detent position. Hooked cable end. 0.05" dia. cable in 0.25" O.D. rubber in steel jacket. 9/16" total pull distance. 30-3/4" max. cable length. Two bolt mount on handle ass...

    ID: MG445
    Available

  • BAG OF 200 EXPANSION SPRINGS

    Bag of 200 expansion springs. Exactly as pictured. Overall length 1-1/2". Overall width is 3/8". Loop diameter is 3/8". Sold in bags of 200.

    ID: MB818
    In Stock: 1

  • ASSORTED SURPLUS

    Mechanical, hardware, electronic and electric surplus. Click on MORE INFO to open the pdf file detailing this inventory.

    ID: SA938
    Available

  • 66 PIECE PRECISION DRILL AND ENGRAVING KIT

    You get; 8000-18000 rpm adjustable speed lightweight electric drill, 4 piece collet set, 6 piece diamond wheel set, 10 cut off wheels, rubber polishing disc, 2 sanding drums, 6 sanding bands, 10 polishing stones, 1 wire brush, 7 polishing felts, 1 silicon carbide grindstone, 5 grinding discs, 4 mandrels, ...

    ID: MG380
    Available

  • DIE ATTACH COLLETS BY "SMALL PRECISION TOOLS"

    Offers considered for the full lot.

    ID: TS359
    Available

  • EXTENSIVE INVENTORY OF ELECTRONIC COMPONENTS

    Click on MORE INFO to access this large list of electronic components by such major brand names as Matsushita, Littlefuse, Molex, Motorola, Murata, National Semiconductor and much, much more.

    ID: SA910
    Available

  • EXTENSIVE INVENTORY OF ELECTRONIC COMPONENTS

    Click on MORE INFO to access this large list of electronic components by such major brand names as Ohmite, OKI Semiconductor, Philips, TDK, Texas Instruments and much, much more.

    ID: SA911
    Available

  • EXTENSIVE INVENTORY OF ELECTRONIC COMPONENTS

    Click on MORE INFO to access this large list of electronic components by such major brand names as 3M, Agilent, Crane Connectors, Fairchild and much, much more.

    ID: SA903
    Available

  • FUSE PULLER AND INSERTION TOOL

    Durable plastic tool for the removal of all 5mm and 1/4" diameter glass fuses. Opposite end permits user to remove and insert blade type fuses. Saves broken finger nails.

    ID: MG320
    Available

  • 10 X 19MM BEARINGS - NHBB A1 P25 LY48 / SSL1910ZZR

    We have approximatley 1000 available... take all - $2.50 ea

    ID: TS338
    Available

  • 3M TOUCH SYSTEMS FROM SURPLUS TRADERS!

    Check out this healthy list of 3M Touch Systems being offered by Surplus Traders, by clicking the "more info" button. If you need additional 3M Equipment, please email your requirements to marshall@surplustraders.net.

    ID: SA533
    Available

  • PANAVISE PRODUCTS AT VERY ATTRACTIVE PRICES

    If you are using quantities of PanaVise products, I would like to do business with you. I can save you appreciable money on your purchases. We are factory authorized distributors of the unique PanaVise products and I am prepared to quote extremely attractive prices. I am also pleased to provide technical ...

    ID: MG285
    Available

  • ASSORTMENT OF CATV HARDWARE AND ELECTRONIC PRODUCTS AVAILABLE

    Please check the list for great items by Scientific Atlanta, Corning, Tyco/Raytheon, 3M, Crouse-Hinds, GMP, Greenlee, Jackson, Hogg Davis, Bashlin, Lemco, Raychem, Wavetek, Miller, Elk River, Sadelco, Augat/LRC, Comsonics, Temp, Dynatel, Sumitomo, Fujikura, Ripley, Western Electric, Diamond, Brooks, Multi...

    ID: TS320
    Available

  • HEATSINK COMPOUND KEEPS ICS AND TRANSISTORS COOL

    This heatsink compound contains silicone and is used to transfer heat away from transistors and IC's. 2oz. tube.

    ID: MG261
    Available

  • VERY INEXPENSIVE TWEEZER/MAGNIFIER COMBO

    Clever! A stainless steel 2-1/2" tweezer with a built-in 6X magnifier. Great for pulling splinters, examining small areas etc.

    ID: MG262
    Available

  • HI-VOLTAGE TEST SCREWDRIVER TESTS 80 TO 500 VOLTS AC OR DC

    This very handy combination screwdriver/tester works over the range of 80 to 500 volts AC or DC. Use for testing ground lines, open or shorted circuits etc.

    ID: MG083
    Available

  • STRAIN TYPE ANTENNA INSULATORS

    This is a lightweight, durable molded tenite plastic strain type antenna insulator. Does everything that ceramic does and more.

    ID: MG090
    Available

  • DELPHI 213-3629 02 SENSORS

    Delphi 213-3629 02 sensors new bulk. We have a 30 units available

    ID: YA999
    Available

  • PRECISON MICRO CUTTING COMPACT CUTTERS

    Excellent compact cutters for precision work, cutting tie wraps, etc. POR

    ID: TS256
    Available

  • EXCESS UPS COMPONENT PARTS FOR SALE!

    UPS manufacturer is clearing overstock of power supplies, enclosures, power components, etc. Please click on the more info button to view the list. Contact us today!

    ID: LA222
    Available

  • COMPAQ HEATSINK FAN KIT 360327-001

    Compaq heatsink fan kit 360327-001 used pulls tested Qty 300 units.

    ID: YA677
    Available

  • ALLEN BRADLEY, TRUCK CABLES AND MUCH MORE

    Allen Bradley, Truck cables and much more. Please view complete list.

    ID: LA141
    Available

  • 8 PIECE MAGNETIC SOCKET SET

    Handy little devils at a low price. All in a nice "snap-close" container. Imported from China. Please call Ted at 514-739-8723.

    ID: MF312
    Available

  • WEBBED NYLON CINCH STRAP AND BUCKLE

    5.5 feet x 1 inch webbed nylon strap with double-stitched loop ends. Self-clinching buckle. Heavy-duty S-hook on one end.

    ID: MF502
    Available

  • NEW HYDRAULIC HOSE 100R13 GATES/GLOBAL BRAND FLAME RESISTANT G5K

    100R13 new hydraulic hose Gates/Global brand flame resistant G5K model,200 feet, 5000 PSI, has a few nicks (8-10, scratch up to nickel sized) from rough handling.

    ID: YA381
    Available

  • SILENT EUROSLIDES - 13,000 SETS OF THE 14"; 7,000 SETS OF 16&...

    Silent euroslides These are in the following lengths: 14" (350mm), 16" (400mm), and 18" (450mm). 13,000 sets of the 14"; 7,000 sets of 16"; and 6,000 sets of 18".

    ID: HB222
    Available

  • MARCONI PARTS

    Marconi Fore Branded Chassis (AC) w SCP P5 processor, SCP-P5-200, SCP-P5-266. Marconi, NM-4/155UTP5LC, NM-4/155MMSCD, NM-4/155SMIRD.

    ID: YA357
    Available

  • 3M MICRO TOUCH CONNECTOR 7319010

    3m microtouch connectors 7319010, NCR 497-0427916.

    ID: YA275
    Available

  • 3X MAGNIFIER LAMP

    30" spring balanced arm reach. Uses one 60 watt bulb. Procelan socket. 4" diameter 3 diopter magnifier lens. Attractive beige finish. Bulb not included. Display packaged for retail sales. UL listed.

    ID: MF194
    Available

  • FLUORESCENT 5" DIAMETER MAGNIFIER LAMP WITH AC RECEPTACLE BUI...

    45" extension arm. Supplied with 22 watt circle tube. New wire clip design permits easy installation & removal of the fluorescent tube. 5" diameter. 118 to 120VAC/60Hz 3 conductor cord. UL listed. Black. Display packaged for retail sales.

    ID: MF198
    Available

  • FLUORESCENT 5" DIAMETER MAGNIFIER LAMP WITH AC RECEPTACLE BUI...

    45" Extension arm. Supplied with 22 watt circle bulb. New wire clip design permits easy installation & removal of fluorescent tube. 5" Diameter. Display packaged for retail sales. UL Listed. Black. (Also available in white order MF196)

    ID: MF195
    Available

  • DELUXE RECTANGULAR FLUORESCENT 7" X 5.5" MAGNIFIER LAMP

    47" spring balance arm which can be secured in any position. 3X, 7" x 5.5" lens. Supplied with two 7 watt compact flourescent bulbs. Beige. UL listed.

    ID: MF199
    Available

  • FURIOUS LITTLE BRACKET

    Neat metal bracket as pictured. Cobra replacement part 545-137-N-001. Comes with two suction cups that simply won't let go when on glass. Includes small piece of double edged tape. Ideal for use on car window etc.

    ID: ME918
    In Stock: 1

  • 3 DIOPTER CLAMP ON MAGNIFIER LAMP

    Compact size, ideal for limited workspaces in home or office. Heavy-duty 2" clamp for securing lamp to workbench. Large enough to clamp securely onto a cubicle divider. High quality 3.5" glass 3-diopter magnifying lens with dust cover. Renders colors exactly as one would see in the 12 'O clock...

    ID: MF193
    Available

  • DELUXE HALOGEN 6" DIAMETER MAGNIFIER LAMP WITH AC RECEPTACLE ...

    Supplied with 100 watt halogen bulb. 6" Magnifying lens with shade cover. 45" Spring balanced arm which can be secured in any position. 3 Diopter, 6" diameter lens. Display packaged for retail sales. UL listed. Black.

    ID: MF197
    Available

  • DELUXE RECTANGULAR FLUORESCENT 7" X 5.5" MAGNIFIER LAMP W...

    47" Spring balance arm which can be secured in any position. 3 diopter, 7" x 4.5" diameter lens. Supplied with three 9 watt compact fluorescent bulbs. Two on/off buttons Attractive beige color. UL listed.

    ID: MF200
    Available

  • TWO 18" STRIPS OF SELF ADHESIVE VELCRO

    Two 7/8" x 18" white strips of velcro with strip and press adhesive backing. So handy for a multitude of jobs. Food for a creative mind. Blister packed for retail sales.

    ID: MF190
    Available

  • CLEVER, CLEVER CORD WINDER FOR TANGLE-FREE STORAGE

    Oh so neat. Store your extension cords, telephone cords, Christmas tree lite strings etc. Sturdy plastc construction. As pictured. (Less power cord)

    ID: MF181
    Available

  • 15 PIECE EYEGLASS REPAIR KIT

    You get a magnifying glass, mini screwdriver, mini screws, tips, neck cord, special wrench and nose pads. Everything you need. Blister packed for retail sales.

    ID: MF171
    In Stock: 1

  • JOSLYN # J8054 -BOLT 16" X 5/8" THIMBLE EYE

    JOSLYN # J8054 - Pole Line Bolts BOLT, 16" X 5/8" THIMBLE EYE, Guy Bolt, Straight Type.

    ID: HB077
    Available

  • 33" LONG FLEXIBLE ACTUATOR CABLE

    Actuator cable designed for use in automotive application. Similar to, but more heavy-duty than, the brake or gear shift cable on a bicycle, movement at one end of the cable produces movement over the same distance at the other end. Could be used for robotics or other mechanical control application. Stran...

    ID: ME836
    Available

  • 4 10' ROLLS OF COLORED ELECTRICAL PVC TAPE ON A CARD

    Each roll of PVC tape is 10' long. You get 4 colors; black, red green and yellow. All on a blister card.

    ID: ME706
    Available

  • ROHS COMPLIANT WATER-SOLUBLE LEAD-FREE WS700 WIRE SOLDER

    Lead free water soluble solder by Qualitek assure that your products are in complete compliance with new industry RoHS standards. The WS700 solder is formulated for electronic applications where rapid "wetting" action and ease of cleaning the flux residue with water is required. This organic flux ...

    ID: ME504
    Available

  • SET OF 5 GEARS AND BUSHINGS

    Five matched break-resistant plastic gears ranging from 0.44" diameter(10 teeth) to 2.02" (50 teeth). Gears are molded with 0.15" (4mm) bores and come with inserts which reduce the bore to 0.065" (2mm) diameter. Set includes five gears and five inserts.

    ID: ME688
    Available

  • LARGE LIST OF ELECTRONIC PARTS, COMPONENTS, ADAPTERS, COMPUTER PA...

    Large list of electronic parts, components, adapters, computer parts and much more. Go to more info for complete inventory list.

    ID: LA143
    Available

  • ROHS COMPLIANT LEAD-FREE NC600 WIRE SOLDER

    Lead free solder by Qualitek assure that your products are in complete compliance with new industry RoHS standards. Single core NC600 flux-filled lead free wire solder. NC600 flux. Use in high reliability assembly. Rapid "wetting" and spreading. Ideal for most consumer electronics and electrical s...

    ID: ME503
    Available

  • 150 PIECE SCREW & NUT SHOP ASSORTMENT

    Super handy around the shop. Imported. Display packed.

    ID: ME383
    In Stock: 43

  • 100 ASSORTED TIE WRAPS

    Bag of 100 assorted color and size tie wraps. 30 each of 4", 6", 8" and 10 of 12". You can never have enough tie wraps around.

    ID: ME384
    Available

  • DELL P/N F3543 ASSY HTSNK NOCONA TMD PWS

    DELL part number F3543 Precision 670 Heatsink. .

    ID: HA799
    Available

  • JAF MODEL W6206-2RS CARTRIDGE BEARINGS

    500 pieces of JAF model W6206-2RS cartridge bearings with Dimensions of 30x62x23.8 mm. Bearings are all new and boxed. Each carton contains 80 pieces and a carton weighs 50 lbs. Minimum order is one carton.

    ID: DB098
    Available

  • ASSORTED HDD COMPAQ, MAXTOR, DEC (DIGITAL), HP, IBM AND OTHER BRA...

    Assorted HDD for sale. All brand names, in new and used condition: Compaq, Maxtor, DEC (DIGITAL), HP, IBM, Hitachi, Western Digital and Fujitsu. Click "MORE INFO" for more details.

    ID: HA784
    Available

  • DELL P4 HEATSINK FOR THE OPTIPLEX SX270

    50 Pcs. DELL P4 HEATSINK FOR THE OPTIPLEX SX270 P/N : Y0764 Take them all !!!

    ID: HA762
    Available

  • HEATSINK FOR DL360 G3 SERVER PART # 301727-001

    Compaq DL360 HEATSINKS Proliant DL360 Xeon G3 Part # 301727-001. New condition.

    ID: HA759
    Available

  • 40 ASSORTED RING & SPADE CRIMP TERMINALS

    40 assorted spade and ring crimp terminals. Assorted colors and sizes. Wonderful value. Blister packed for retail sales.

    ID: SA176
    In Stock: 106

  • 20 ASSORTED "MARS" TYPE TWIST-ON CONNECTORS

    20 assorted "Mars" type twist-on connectors. Orange. Metal inserts. Blister carded for retail sales. Imported.

    ID: SA170
    In Stock: 144

  • D-SUBMINIATURE CRIMPING TOOL

    This simple hand tool is used to crimp D-Sub pins onto wire.Crimps D-Sub 26-28 AWG wire Also crimps; Butt-Insulated Connectors 22-26 AWG wire. Telephone Spade Lugs 22-26 AWG wire. Solderless Lug, 22-26 AWG wire. Solderless Lugs 14-18 AWG wire. This is the same tool as Eclipse 300-035

    ID: ME226
    Available

  • POLE LINE HARDWARE FOR SALE

    we have a list of POLE LINE HARDWARE for sale. Please hit "MORE INFO" to view the list. Contact Marshall Duskes for purchasing information.

    ID: WA838
    Available

  • MISCELLANEOUS HARDWARE FOR SALE

    We have a list of hardware for sale. bolts, nuts, springs and brackets. Hit MORE INFO to view the list. Contact Marshall Duskes @ 450-902-0489

    ID: WA829
    Available

  • 3/4" X 66 FEET BLACK PVC ELECTRICAL TAPE

    Our most popular tape. 7 Mil x 66 Feet of 3/4" black PVC 600 volt electrical tape. UL listed. Imported to save you money.

    ID: ME085
    In Stock: 1

  • 3" LENGTH OF 3/8" TUBING

    This tubing appears to be white semi transparent Neoprene. It is cut in 3" lengths. The tubing has an OD of 3/8". The wall is thick leaving 3/16" inner diameter. Offers considered for the lot.

    ID: MD787
    In Stock: 1

  • 3M 4200G CABINET AND THREE 3M 4200E OR EE CABINET FOR SALE

    We currently have available one never installed 3M 4200G cabinet and three 3M 4200E or EE cabinet. All these units have "NEVER BEEN INSTALLED" Marshall Duskes 450-902-0489

    ID: WA388
    Available

  • 1/4-20 "E-Z GRIP" INSTRUMENT KNOB

    This 1/4-20 E-Z Grip knob fits popular cameras and other photographic, video and medical equipment. Hard to find at any price.

    ID: MD547
    In Stock: 1

  • ELECTROID 12VDC CLUTCH ASSEMBLY

    Electroid SBEC-17CC-4-4-12V CL CPLG 12VDC electromagnetic friction clutch assembly. Brand new. Accepts 1/4" dia motor shaft. Overall dia. is 1-3/4". Overall clutch assembly is 1-5/8" thick.

    ID: MD413
    In Stock: 1

  • HUGE NAIL AND DRYWALL SCREW INVENTORY FOR THE CONSTRUCTION INDUST...

    This inventory is located in Canada. Can be shipped anywhere. Can be had at below factory price. We would like to sell it as one lot. Contact Ted Duskes 514-739-8723. Click here for inventory list

    ID: MD365
    Available

  • ONE POUND OF ASSORTED HARDWARE

    Screws, nut, bolts, gears, springs and who knows what else. If it looks interesting and useful to the inventor, technicien, school shop or maintenance dept - we throw it in. These are packed up to order so please allow time for delivery.

    ID: KT003
    Available

  • 3M 2520-5002UB RIGHT ANGLE LOW PROFILE HEADER CONNECTOR

    3M #2520-5002UB right angle 20 pin low profile header connector. Solder tail.

    ID: GA784
    In Stock: 1

  • HIGH QUALITY - FULLY WORKING TEST EQUIPMENT

    Check out this list containing a small portion of the test equipment Surplus Traders has available. This is an assorted lot of top quality, fully tested, brand name test equipment. Contact us today if you are interested in any item from this list, or if you are looking for some test equipment you don&#...

    ID: DB726
    Available

  • PENTACON M21002545N STANDOFF INSULATOR

    PENTACON M21002545N Standoff, 4.5mm, HX, M/F, nylon, 5mm long, M2.5, threaded. POR

    ID: GA556
    In Stock: 1

  • STICK ON FOOT PAD

    Just peel and stick on this 1/2" x 1/2" rubber foot pad. $19.95 takes all 448 pads.

    ID: GA549
    In Stock: 1

  • THREADED ALUMINUM STANDOFF, 3/16 HEX, 3/16 LG

    Standoff, 3/16 Hex, 3/16 lg, Threaded Aluminum

    ID: GA553
    In Stock: 2269

  • LOCTITE 22221 THREADLOCKER

    Lock nuts bolts and studs to prevent vibration. Seal out moisture that causes corrosion. Seal against fluid leakage and prevent wear. For fasteners under 1/4". .34 FL. OZ (10ML) bottle of Locktite p/n 22221 (222MS)

    ID: GA411
    In Stock: 1

  • 12VDC 83MM 9 BLADE CPU COOLER FOR PENTIUM 4 (SOCKET 478) CHIPS UP...

    9 blade CPU cooler features aluminum 6063 construction, #28 style fins, and a full 29CFM. Runs at 4200RPM. For full info, click the "more info" icon. Imported for ongoing availability. P.O.R.

    ID: MC823
    In Stock: 1

  • 12VDC 83MM 11 BLADE CPU COOLER FOR PENTIUM 4 (SOCKET 478) UP TO 2...

    11 blade CPU cooler features aluminum 6063 construction, #28 style fins, and a full 29CFM. Runs at 4200RPM. For full info, click the "more info" icon. Imported for ongoing availability. P.O.R.

    ID: MC824
    In Stock: 1

  • GLOBE N-3801-256, 3/16" HEX, #2-56 X 3/16L, F/F NYLON STANDOF...

    GLOBE N-3801-256 Standoff, 3/16" hex, #2-56 x 3/16L, F/F nylon. POR

    ID: GA416
    In Stock: 1

  • PENTACON 2052256B BRASS STANDOFF, 3/16" HEX, #2-56 X 3/16L, F...

    PENTACON 2052256B Standoff, 3/16" hex, #2-56 x 3/16L, F/F, brass. POR

    ID: GA419
    In Stock: 1

  • SPACER, SWAGE, 1/4, ROUND, BRASS

    GLOBE B-2705-140-105-0 Spacer, swage, 1/4, round, brass. POR

    ID: GA424
    In Stock: 1

  • GLOBE N-7759-090 3/16", .031 THICK, 090 HOLE, FLAT NYLON WASH...

    GLOBE N-7759-090 Washer, flat, 3/16", .031 thick, 090 hole, nylon. POR

    ID: GA417
    In Stock: 1

  • STANDOFF, HEX, 3/16, FEMALE, NYLON

    GLOBE N-3805-256 Standoff, hex, 3/16, female, nylon. POR

    ID: GA429
    In Stock: 1

  • SPACER, ROUND, 4.5MM OD, 2.9MM ID, 3MM LONG, BRASS

    PENTACON v Spacer, round, 4.5mm OD, 2.9mm ID, 3mm long, brass. POR

    ID: GA418
    In Stock: 1

  • SCREW, 2-56 X .312LG, (5/16") MACHINE, PAN HEAD

    PENTACON MS51957-4 Screw, 2-56 x .312Lg, (5/16") machine, pan head, ZP. POR

    ID: GA421
    In Stock: 1

  • SCREW, 2-56 X .562LG, PAN HEAD, SS

    PENTACON MS51957-141 Screw, 2-56 x .562Lg, pan head, SS POR

    ID: GA430
    In Stock: 1

  • SCREW, 4-40 X 1/4"L, MACHINE, PAN HEAD, PHILLIPS

    MSC 67413641 Screw, 4-40 x 1/4"L, machine, pan head, Phillips, ZP POR

    ID: GA410
    In Stock: 1

  • BERGQUIST Q3-62 HEATSINK PAD, TO-220

    BERGQUIST Q3-62 Heatsink pad, TO-220

    ID: GA380
    In Stock: 1

  • BERGQUIST Q3-22 HEATSINK PAD, DO-4

    BERGQUIST Q3-22 Heatsink pad, DO-4

    ID: GA383
    In Stock: 1

  • AAVID TO-18 & TO-220 HEATSINK

    Aavid 531002B02500 heatsink with solderable pins. Accepts TO-18 and TO-220. Black anodized.

    ID: GA393
    In Stock: 1

  • AAVID 577002B00000 HEATSINK, TO-220, HORIZONTAL

    AAVID 577002B00000 Heatsink, TO-220, horizontal.

    ID: GA378
    In Stock: 23

  • SCREW, 2-56 X .125 LG, PAN HEAD, SS

    PENTACON MS51957-1 Screw, 2-56 x .125 Lg, pan head, SS POR

    ID: GA360
    In Stock: 1

  • STANDOFF, 3/16" HEX, #2-56 X 3/16L, M/F, BRASS

    GLOBE B-7200-256 Standoff, 3/16" hex, #2-56 x 3/16L, M/F, brass. POR

    ID: GA357
    In Stock: 1

  • STANDOFF, 3/17" HEX, #2-56 X 7/16L, M/F, BRASS

    GLOBE B-7204-256 Standoff, 3/17" hex, #2-56 x 7/16L, M/F, brass POR

    ID: GA359
    In Stock: 1

  • STANDOFF, 1/8" HEX, #2.56 X .250 L, F/F, BRASS

    GLOBE B-3702-256 Standoff, 1/8" Hex, #2.56 x .250 L, F/F, brass POR

    ID: GA310
    In Stock: 189

  • SCREW, 6-32" X 1/2"LG, SECURITY TORX/PIN BUTTON HEAD

    Screw, 6-32" x 1/2"lg, security torx/pin button head, (black) POR

    ID: GA208
    In Stock: 1

  • UNICORP SU131-1D-16 STANDOFF

    UNICORP SU131-1D-16 Standoff, swaged, brass, 0.125" high. POR

    ID: GA105
    In Stock: 1

  • WASHER, 0.106" ID, 0.187" OD, 0.045" THICK BRASS

    PENTACON WF03B187045 Washer, 0.106" ID, 0.187" OD, 0.045" thick brass. POR

    ID: GA182
    In Stock: 1

  • SCREW, M2 X 6MM, PHILLIPS PAN HEAD

    PENTACON MPPM02S06SS Screw, M2 x 6mm, Phillips pan head, SS MPPM02S6SS POR

    ID: GA190
    In Stock: 1

  • SCREW, 4-40" X 1/2" LG, SECURITY TORX/PIN BUTTON HEAD

    MCMASTER CARR 91900A110 Screw, 4-40" x 1/2" lg, Security Torx/Pin Button Head, (black) POR

    ID: GA184
    In Stock: 1

  • AAVID 5577102B04000 HEAT SINK, 0.52 X 0.375 X 0.75, WITH TAB

    AAVID 5577102B04000 Heat sink, 0.52 x 0.375 x 0.75, with tab

    ID: GA197
    In Stock: 119

  • NUT, 2-56, HEX, MS-COARSE THREAD

    MSC 87921201 Nut, 2-56, Hex, MS-coarse thread, ZP POR

    ID: GA200
    In Stock: 1

  • DODGE 6035-04BR219 ENCLOSURE HARDWARE

    DODGE 6035-04BR219 enclosure hardware. Insert, 4-40 x .2, 210 POR

    ID: GA189
    In Stock: 1

  • SCREW, 2-56 X 1/4, PHILLIPS, PAN HEAD, SS

    PENTACON MPP02C04SS Screw, 2-56 x 1/4, Phillips, pan head, SS POR

    ID: GA178
    In Stock: 1

  • SCREW, SOCKET HEAD CAP, (BLACK) 4-40" X 1 1/4LG

    MCMASTER CARR 91251A078 Screw, socket head cap, (black) 4-40" x 1 1/4lg POR

    ID: GA185
    In Stock: 1

  • KEYSTONE 1037 PC TEST POINT

    KEYSTONE 1037 PC test point,

    ID: GA198
    In Stock: 1

  • HEYCO 1147 STRAIN RELIEF

    Heyco 1147 strain relief, type SVT, black nylon, 0.1" chassis

    ID: GA161
    In Stock: 1

  • TAPE, DOUBLE SIDED, FOAM, I66, 0.5 WIDE, 0.0625

    3M 3M4026-1/2 Tape, double sided, foam, I66, 0.5 wide, 0.0625 thickness

    ID: GA174
    In Stock: 15

  • SCREW TYPE ALLIGATOR CLIPS

    Screw Type alligator clips. Specs: 2" long, 3/8" jaw opening, accepts banana plug, equal to Mueller #60S. Minimum quantity order is 100,000 pieces.

    ID: DB217
    Available

  • POPULAR COMPONENT MOUNTING NUT

    Popular mounting nut for 1/4" diameter switches like the Radio Shack #275-1548. The thread is 7x.75. Not easy to find when you need 'em. We have a few thousand in stock. Your cost is $39/1000

    ID: MC650
    Available

  • 180 DEGREE SWIVEL

    0.75” length swivel with female 4-40 threads at both ends. 180 degree range of motion.

    ID: MC527
    Available

  • PAIR OF 16" DRAWER SLIDES

    FULL EXTENSION, BALL BEARING DRAWER SLIDES. 16” DRAWER SLIDES. Accuride # C2 632-16. 50 lb capacity. 16” collapsed, 32” expanded. 1.04” wide. 0.5” thick. Separate locking support bars attach to drawer or equipment and enable easy removal while leaving slides in place. Can be used...

    ID: MC537
    Available

  • ALUMINIUM DIN RAIL

    For use with screw terminal sockets . An easy way to attach multiple relay sockets. Sockets snap-on and off of rail. DIN rails come in 1 meter (39”) lengths with pre-drilled mounting holes every inch. Can be cut to shorter lengths.

    ID: MC465
    Available

  • HIGH QUALITY RUBBER BELLOWS ASSEMBLY

    High-quality rubber bellows with aluminum end plates. 4.42" overall diameter. 1.2" thick when compressed. approximately 2.5" expanded. One-way valve, prevents air from entering through the exit orifice. 0.5" diameter, coarse thread fitting on the side from which air is expelled.

    ID: MC435
    Available

  • 4-40 X 1/2 SOCKET CAP ALLOY STEEL SCREW

    4-40 hex type socket cap screw. 1/2" long. Alloy steel. Knurled head. Black finish. USA made.

    ID: MB827
    Available

  • BAG OF 1,000 EXPANSION SPRINGS

    Exactly as pictured. Overall length 5/8". Overall width is 1/8". Loop diameter is 1/8". Bag of 1,000.

    ID: MB819
    In Stock: 1

  • TRIPLE RCA WALL JACKS

    ID: TG774
    Available

  • COBALT CHLORIDE COLOR CHANGE GEL PACKS

    75 thirty six pound containers each containing gel packs weighing 2.2 grams each, used for keeping products dry. Material is cobalt chloride color change gel which absorbs atmospheric moisture. Perfect for shipping or storage of electronic components. Containers sealed and in perfect condition. FOB New Je...

    ID: DA199
    Available

  • LIST OF HIGH QUALITY - FULLY TESTED TEKTRONIX TEST EQUIPMENT

    All items are top quality, fully tested. Contact us today with your request for a quote on any item on this list.

    ID: TG451
    Available

  • BAG OF 3,000 4-40 X 3/4 SOCKET CAP ALLOY STEEL SCREWS

    Bag of 3,000 4-40 hex type socket cap screws. 3/4" long. Alloy steel. Knurled head. Black finish. USA made. $295/bag

    ID: MB695
    In Stock: 171

  • THORSEN PROFESSIONAL 6 PIECE SCREWDRIVER SET

    Chrome vanadium. 3" pocket, 4" cabinet, 6" mechanics, 3" - 01 Phillips, 1-1/2" stubby and combination offset. Excellent flea market item. Each set display packaged. Thorsen number 156256.

    ID: TF556
    Available

  • 42,000 POUNDS OF NAILS

    About 5000 boxes. Typical retail price is $45 - $55 per box. Take all - $17 per box.

    ID: TE498
    Available

  • 50,000 LBS OF ASSORTED ASSEMBLY HARDWARE

    Packed in 3 lb bags, each bag contains: 58 pcs x 5/16 - 18 x 5/8 Slotted Truss Head 72 pcs x 5/16 Medium Split Washer 72 pcs 5/16 - 18 Std. hex nut 10 pcs x 5/16 - 18 x 3/4 hex head cap screw 4 pcs x 3/4" flat washer (special type) 2 pcs x hair pin cotter (Western Wire # 227) 1pc x 1/4 - 20 x 3-1/2 ...

    ID: TE499
    In Stock: 1

  • 16,000 MINI TOWER CASES FOR SALE

    Tung Zih . Similar to those used by Digital and NEC Powermate. All wiring harnesses included, but without power supplies. Shipped FOB California. Sold in large quantities only.

    ID: TD656
    In Stock: 2

  • DRYWALL ANCHORS

    7/8" long x 1/4" O.D. Red. 500,000 available. P.O.R.

    ID: CX007
    In Stock: 7

  • 2.5" CASTERS

    2.5" x 1" black rubber wheel. Substantial quantity available.

    ID: CX367
    Available

  • ZEBRA HW30256-B

    Zebra Thumb Nut

    ID: ZEBRA-HW30256B
    Available

  • IBM 25P6309

    IBM CPU Heatsink

    ID: IBM-25P6309
    Available

  • ZEBRA 46882-003

    Machine Screw

    ID: ZEBRA-46882003
    Available

  • ZEBRA HW30423-003

    Zebra Screw

    ID: ZEBRA-HW30423003
    Available

  • IBM 26K8805

    IBM 26K8805 Heatsink

    ID: IBM-26K8805
    Available

  • ZEBRA HW01815

    Computer Assembly Screw - 25 / Pack

    ID: ZEBRA-HW01815
    Available

  • ZEBRA HW77047

    Zebra Printhead Mounting Screws

    ID: ZEBRA-HW77047
    Available

  • IBM 13N1625

    IBM 13N1625 Heatsink

    ID: IBM-13N1625
    Available

  • IBM 48P9576

    IBM Heatsink

    ID: IBM-48P9576
    Available

Showing 1 to 24

Set Ascending Direction
per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Browse By
Sub Categories
  1. 3M (19)
  2. Aavid (2)
  3. Air Compressors (13)
  4. Alligator Clips (6)
  5. Bearings (15)
  6. Chemicals For Hardware and Electronics (4)
  7. Electrical Hardware (52)
  8. Electrical Tape (4)
  9. Electronic Hardware (52)
  10. Equipment Racks (3)
  11. Fasteners (5)
  12. Heat Sinks (18)
  13. Hydraulic Products (4)
  14. Insulators (4)
  15. Keystone (1)
  16. Magnifying Lamps (9)
  17. Mechanical Hardware (100)
  18. Mechanical Surplus (18)
  19. Pneumatic Products (6)
  20. Power Tool Batteries (1)
  21. Soldering (15)
  22. Tektronix (5)
  23. Tools (52)
  24. TV Wall Brackets (12)
SURPLUSTRADERS.NET
Give us a call at: 800-341-6468
Email: sales@surplustraders.net
Fax: 888-661-3032
PO Box 276, Alburg VT 05440. Vermont, United States
Payment options:
Copyright © 2017 SurplusTraders. All rights reserved.

Product names, logos, brands, and other trademarks featured or referred to within the Surplustraders.net website are the property of their respective trademark holders. These trademark holders are not affiliated in any way with Surplustraders.net or our website.

** All offerings subject to prior sale. All prices subject to change without notice.