Connectors
-
LARGE LIST OF SURPLUS ELECTRONIC COMPONENTS
Click on MORE INFO to view this list of electronic components by 3M, Amphenol, Axon, ITT Cannon, National Semiconductors, Schneider Electric, Tyco, and many others. Minimum order requirement may apply.
-
BNC ADAPTERS - RT. ANGLE, "T" TYPES AND MORE
BNC adapters - "T" type, right angle, screw terminals and more. Unless otherwise noted, all are nickel plated brass with Delrin insulators. Click "more info" for complete list with photos.
-
MULTI-PIN MOBILE CONNECTORS - 2 TO 8 PIN
2 to 8 pin multi-pin connectors. Generically considered microphone connectors, they can be used in a variety of applications requiring multi-pin connections. Positive screw-on retaining ring and built-in strain relief. Click "more info for complete list.
-
INSULATION DISPLACEMENT DUAL ROW CONNECTORS - 6 TO 64 POSITION
Easily removable molded cable strain relief is fully interchangeable with competative models. 100" spacing. Meets Mil-C-83503 specs. Contact resistance: 30m ohm max. at DC 100mA. Insulator resistance: 1000m ohm min. at DC 500V. Voltage: AC 500V for 1 minute, current rating: 1 Amp Dielectric Withstanding. Contacts are phosphor bronze, housing is PBT & 30% Glass Fiber (UL 94V-0). Click "more info" for schematic of the A and B dimensions. Part No. Position Dim. A Dim. B GF506 6 .479 .20 GF507 8 .579 .30 GF508 10 .679 .400 GF509 12 .779 .50 GF510 14 .879 .600 GF511 16 .979 .700 GF512 20 1.179 .900 GF513 24 1.379 1.10 GF514 26 1.479 1.20 GF515 30 1.680 1.40 GF516 34 1.879 1.60 GF517 40 2.179 1.90 GF518 50 2.679 2.40 GF519 60 3.179 2.90 GF520 62 3.279 3.0 GF521 64 3.379 3.10 A break-off pin is also offered which can be used to Key the connector so that it may be connected only with the correct orientation. Pin is inserted into a socket and a corresponding pin is removed from the male connector. Ask for GF522.
-
TYCO 2.5MM SIGNAL DOUBLE LOCK CONNECTOR CONNECTORS
2.5mm signal double lock connectors by Tyco, p/n 917692-1. Housing, plug, 8 positions, 2.50 mm centerline. 3,000 pcs
-
2.5MM SIGNAL DOUBLE LOCK CONNECTOR BY TYCO
Tyco 917728-1 2.5mm signal double lock connectors - 1,200 pcs. Header, eight positions, high profile, terminate to printed circuit board with locating posts.
-
TYCO POWER DOUBLE-LOCK CONNECTORS
Tyco 177899-2 power double-lock connectors. Housing, plug, 3 positions, 3.96 mm centerline, free hanging mount. 3,200 pcs.
-
2.5MM SIGNAL DOUBLE LOCK CONNECTORS BY TYCO
Tyco 917687-1 2.5mm signal double lock connectors. Housing, plug, 3 positions, 2.50 mm centerline. 8,000 pcs.
-
CONNECTORS BY TYCO, DELPHI, SUMITOMA AND MORE
Plug assemblies, 2 way connectors, heat shrink and more items by Flexopet, Alpha Fit and others - click "more info" for complete inventory of goods available.
-
INSULATION DISPLACEMENT CARD EDGE CONNECTORS - 14 TO 50 CONTACT AVAILABLE
Contacts adjust to compensate for P.C. board thickness. Contact resistance: 30m ohm max. at DC 100mA. Insulator resistance: 1000m ohm min. at DC 500V. Voltage: AC 500V for 1 minute. Current rating: 1 Amp Dielectric Withstanding. Contacts are phosphor bronze, housing is PBT and 30% Glass Fiber (UL 94V-0). Click "more info" for schematic of the A, B, and C dimensions. Part No. Contacts Dim. A Dim. B Dim. C GF423 14 1.073 .816 .600 GF425 20 1.374 1.127 .900 GF426 26 1.673 1.416 1.200 GF427 34 2.073 1.815 1.600 GF428 40 2.373 2.115 1.900 GF429 50 2.973 2.616 2.400
-
BNC TERMINATORS - 75 TO 93 OHMS
BNC terminators, 0.5 watts, 75 ohms to 93 ohms. With or without chain - those without are color coded. With chain: Part No. Ohms GF409 75 GF410 50 GF411 93 Without chain: Part No. Ohms GF412 75 GF413 50 GF414 93
-
FEMALE CRIMP CONNECTIONS FOR RG59/U, 62/U, 55/U AND 58/U
Chassis mount female crimp connections: Part No. Application GF419 RG59/U, RG62/U GF420 RG55/U, RG58/U
-
INSULATION DISPLACEMENT DIP CONNECTORS
Fits all standard DIP Sockets or direct soldering to P.C. board. Accepts 28-30 ga. wire, mates with .050” centered round conductor flat wire. .100" contact spacing. Voltage: AC 500V for 1 minute. Contact resistance: 30m ohm max. at DC 100mA, insulator resistance: 1000m ohm min. at DC 500V. Current rating: 1 Amp dielectric withstanding. Contact is phosphor bronze, housing is PBT & 30% Glass Fiber (UL 94V-0). (Dimensions in inches listed under A,B,D & D columns.) Part No. Contacts Dimensions GF330 14 .895 GF331 16 .989 GF332 18 1.052 GF333 20 1.170 GF334 24 1.378 GF335 28 1.579 GF336 40 2.178
-
PROTECTED DUAL ROW STRAIGHT AND RIGHT-ANGLE HEADERS
Multiconductor headers for use with femail flat cable connectors, available in straight or right angle. Contacts protected by surrounding walls, are standard .025" square posts and are gold-plated with termination areas of tin-lead. Side latches are removeable. Insulation is black, 94V-0 rated thermoplastic. Straight P/N Right angle P/N Contacts GF263 GF273 10 GF264 GF274 14 GF265 GF275 16 GF266 GF276 20 GF267 GF277 26 GF268 GF278 30 GF269 GF279 34 GF270 GF280 40 GF271 GF281 50 GF272 GF282 60
-
VERTICAL HEADERS, DUAL ROW 0.10"
PC board 0.10" dual row vertial headers. Gold-plated contact surface, terminal ends tinned. Carry current 3 amps. Industry standard drawn, 4 side .025" posts to mate with dual row female connectors on .010" grid. Available in straight or right angle. Straight P/N Right angle P/N Contacts GF284 N/A 6 GF285 N/A 8 GF286 GF300 10 GF287 N/A 12 GF288 GF301 14 GF289 GF302 16 GF290 GF303 20 GF291 N/A 24 GF292 GF304 26 GF293 GF305 30 GF294 GF306 34 GF295 GF307 40 GF296 GF308 50 GF297 GF309 60 GF298 N/A 62 GF299 N/A 64
-
Industry standard spacing, tin-plated contact. Voltage: AC 500V for 1 minute; Current rating: 1 Amp dielectric withstanding. Contact resistance: 30m ohm max. at DC 100mA; insulator resistance: 1000m ohm min. at DC 500V. Contact - phosphor bronze; housing - PBT & 30% Glass Fiber (UL 94V-0). 8 to 40 contact available. (Dimensions in inches listed under A,B,C & D columns.) Part No. Contacts A B C D GF318 8 .400 .300 .400 .300 GF319 14 .700 .600 .400 .300 GF320 16 .800 .700 .400 .300 GF321 18 .900 .800 .400 .300 GF322 20 1.000 .900 .400 .300 GF323 24 1.200 1.100 .700 .600 GF324 28 1.400 1.300 .700 .600 GF325 40 2.000 1.900 .700 .600
-
T-TOOL FOR ASSEMBLY OF "F" CONNECTORS
Finger saving tool for assmebly of twist-on or crimp-on "F" connectors.
-
BNC connectors - BNC to BNC, BNC to UHF, BNC to RCA, BNC to "F". Banana plugs and winding posts are standard .750" center to center with .161" holes in body for side stacking. Unless otherwise noted, all are nickel plated brass with Delrin insulators. Click "more info" for complete list with photos.