Security and Safety

Now an inexpensive CCTV surveillance camera. Cameras like these used to cost $60 and more. Works on 110VAC with the adapter supplied or can be operated on a 9V battery. Use for security, observation, experimentation etc. Specs; 1/4" B/W CMOS. 352x288 pixels. CCIR (PAL), 380 TV Lines. Minimum illumination 0.5 Lux/F1.4 S/N ratio 48dB. Electronic shutter 1/50 to 1/5000 sec. Gamma correction 1.0 Auto adjustments; exposure, gain & gamma correction. Lens 13.6mm. Viewing angle 92 degrees. Video output 1.0Vpp composite, 75 ohm. Audio output to RCA connector. 8VDC/80ma regulated power supply (included). Size 1.65" x 1.50" x 1.10". Operating temp. 14 degrees F to 113 degrees F. Weighs 2.12 oz. Buy several at our LOW price.

Provides an electronic "ding-dong" to announce someone entering a door. This may be the least expensive door announcer and the easiest to install. Attach the magnet to your door and the sounding box to the door frame. Double sticky tape makes mounting easy. On/Off switch. A nice sound announces the customer each time the door is opened. (Batteries not included)

It looks like a computer mouse, but is a very loud personal alarm that may be carried by a jogger, night-shift worker or just someone that might be threatened getting across the parking lot. If the loud sound does not frighten off an assailant, it will at least attract plenty of attention. A bonus feature is a "penlight" flashlight that may be used to locate a lock, foot path etc. Operates on two AAA batteries, which are included.

12VDC SPDT with contacts capable of handling 30 to 40 amps. Draws 120MA. Coil resistance 93 ohms. Has a metal tab with .2" dia hole for mounting. Accepts .25" female push-on spade lugs. Popular for use in alarm systems.

Round high security keylock switches. Especially popular for alarm systems. Both mount in 3/4" dia. holes. 1-11/16" deep. Capable of handling 3 amps at 110VAC. Solder terminals. Each comes with two keys. (MG162) SPST MOMENTARY (MG163) SPST ON/OFF

Operates on from 4 to 28VDC. Draws 15MA at 28VDC. Continuous tone. 95db SPL (1W/1M). fits in a 1-1/8" diameter opening. Screw terminals.

Operates on from 3 to 28VDC. Draws 20MA at 28VDC. Continuous tone. 90db SPL (1W/1M). fits in a 3/4" diameter opening. 5" lead wires.

Operates on 110VAC. Draws 20MA at 110VAC. Pulse tone. 90db/110VAC/30CM. Fits in a 1-1/8" diameter opening. 6" lead wires. UL.

This alerting device gets your immediate attention. Produces a penetrating continuous or pulsating tone. Will operate on 6 or 12VDC. Used in many alarm warning devices. Small in size (only 1"H x 1.5"dia) it mounts in a 1-1/8" dia. hole.

Highly advanced circuitry. Small in size and low in power consumption. Used in many alarm warning devices. Operates on from 2 to 24VDC. Outputs 93dB at 12VDC. Draws only 20ma. Fits into 11/16" or mounting ears require 1-5/16" centers. Starting voltage is 1.0VDC. 1"H x 1" dia. Imported for ongoing availability.

This siren is designed to produce a "wobble" type attention getting sound. The electronics and amplifier are contained in the housing. Output is approximately 124dB (+/- 2dB) at 12VDC with the sound level meter 10' away. Draws 1 amp at 12VDC. Black.

Produces a loud, clear, distinctive ring and will overcome most high backround noise. UL approved. Also Great for auto, truck or boat installation. (We can also supply 6" and 8" versions of this 12VDC bell)

This piezo transducer will operate on from 3 to 28 AC volts and emit a healthy 90dB level audio alert. At 5VAC it consumes only 1.5ma. Only .22" thick. Mounts to any surface. Please click more info button to see a diagram of this product.

Delivers attention getting sound. Operates on from 4 to 15VDC at only 15ma. Wire leads. Only .79" high.

Mounts on PC boards. Delivers attention getting sound. Operates on from 4 to 15VDC at only 15ma. Only .57" high.

Only .55" in diameter. PC board mount. Delivers attention getting sound. Operates on from 3 to 16VDC at only 6ma. Only .3" high.

Slap this clever little hi-tech light in a dark corner and it lights up every time you walk by. It's battery operated so it requires no wiring. It detects your presense by infra red. Operates on 4AA cells or wall transformer (neither supplied). Great for closets, spare rooms, hallways, sheds, garage etc.

Sagem Morpho MT150 biometric (fingerprint) readers. 46 units available.

CCTV multiplexers and quads. Do you see what you require in this list? Access by clicking "more info".

Surplus Traders had this list of CCTV switchers available. List accessible by clicking "more info".

We've got a list of CCTV power supplies. Please view this list by clicking on the "more info" button.

To view our latest list of CCTV FIBER OPTIC parts and equipment, click our "more info" button.

Here is a listing of miscellaneous CCTV parts and equipment. Check it out by clicking on the "more info" button to see if what you require is found here.

We've got CCTV mounts listed here. Please click the "more info" icon, to access the list.