Bells, Buzzers, Beepers, and Noise Makers

This ringer can be installed anywhere. It does not require a phone. Great for remote locations. Never miss a call. Simply pickup the nearest phone when it sounds off. A plastic enclosed mechanical ringer just like in the good old fashioned phones. built-in On/Off switch. Easy installation. Simply plug in to an existing modular jack. FCC Registered. Ringer equivalence 0.5 amp. Works with caller I.D. and UL and SA rated.

Becoming impossible to find. Everyone selling for scrap. Removed from telephones. We know where to get them. Excellent condition. Styles may vary so please be specific with your needs. Not exactly as pictured.

Made by Faraday Inc. Miniature low voltage buzzer for interoffice signaling, school projects and other signaling applications. Metal housing. Operates on from 1 to 3 volts AC or DC. 100 ohm coil. 1-3/4" ctr mounting ears. 1"x1-1/4" x 1/2". Weighs 1/4 lb. Brand new.

Compact unit generates a 2300Hz tone at approx 85db. Unit is rated for 5 volt operation but has been tested on 12 volts (constant use for 8 hours) and functioned perfectly. Excellent as warning buzzers in automotive, motorcycle, robotic and hobbyist applications. Also a great addition to educational and science fair solar projects - a real attention grabber. Bent leads for quick PCB insertion - easily solderable or can be used with alligator clips. Draws only 30ma @ 5vdc. Click the more info icon for the full spec sheet.

Minimum sound pressure (at rated voltages) of 75db. Compact with pigtail leads. No moving contacts to produce arcing, no RF noise. Low current. Maximum width and length are: 0.630” and 1.30”

Minimum sound pressure (at rated voltages) of 75db. Compact with pigtail leads. No moving contacts to produce arcing, no RF noise. Low current. Maximum width and length are: 0.630” and 1.30”

Minimum sound pressure (at rated voltages) of 75db. Compact with pigtail leads. No moving contacts to produce arcing, no RF noise. Low current. Maximum width and length are: 0.630” and 1.30”

Minimum sound pressure (at rated voltages) of 75db. Compact with pigtail leads. No moving contacts to produce arcing, no RF noise. Low current. Maximum width and length are: 0.630” and 1.30”

Minimum sound pressure (at rated voltages) of 75db. Compact with pigtail leads. No moving contacts to produce arcing, no RF noise. Low current. Maximum width and length are: 0.630” and 1.30”

110dB siren includes four red strobe lights and and LED light inside a UV-proof polycarbonate housing. Features flashlight or siren with flashlight. Operating voltage: 6-15VDC, power consumption: 200mA (siren) / 250mA (strobe). Protected against polarity reversal. Also available with blue strobe - ask for GD487.

This small (2.1" x 2.2") wired siren puts out 120dB of sound. Operating voltage: 5-15VDC/250mA. Osc. frequency: 1.5-4kHz. 1.18" mounting holds.

4-15VDC / 15mA PCB-mounting type buzzers for portable equipment. Features single tone-type, osc. frequency 2.8kHz and 85dB sound level.

Economic 4-15VDC/15mA subminiature buzzer with leads. Single tone-type, 90dB, osc. frequency 2.8kHz. ABS case with flange mounting.

4-28VDC/8mA PCB type panel-mount buzzer. Features single/pulse tone type, 90dB sound level with 3.5kHz osc. frequency. Screw connectors.

Solid-state buzzers feature built-in oscillator, flange mounting and ABS casing. Single tone-type, 300-500Hz osc. frequency, 75dB with leads. Part No. Operating voltage Current GD526 3-7V DC 20mA GD527 7-17V DC 15mA GD528 16-30V DC 20mA

These PCB mini buzzers are extremely compact with ultrathin construction. Feature no electrical noise and low current comsumption with high sound pressure level. Single tone-type, 3.2kHz osc. frequency and PCB connector type. Sealed. Part No. Voltage Current dB Color GD530 8-16V DC 15mA 85dB Beige GD531 3-6V DC 25mA 87dB Gray

General purpose buzzer, plated metal housing. Makes noise similar to hair clippers. 115 VAC, 8 watts. Two bolt mounts on 3-1/2" centers.

Drawing only 100mA current, the Slim-Line piezo 15W siren is 1-1/4" thick and weighs only 3 oz. Has dual 110 dB tones: steady or warble. 6-12 VDC operation. UL. White ABS plastic casing, weather-resistant housing for indoor or outdoor use. Dimensions: 4-1/4" x 1-1/4" x 1-1/4".

15W dual-tone Piezo Dynamic siren (yelp or steady) operates on 6-12 VDC (13.5 VDC max.) and draws 200mA current at 12VDC. 115 dB. Weather-resistant, high impact white ABS housing.

Dual-tone indoor/ourdoor Piezo Dynamic siren. 375mA, 117dB. 6-12 VDC operation. Dimensions: 5" x 8"; made of high impact ABS material and is weather resistant. Light weight - weighs only 1.3 lbs.

Indoor/outdoor dual-tone (steady or warble) Piezo Dynamic sirens - 30 watt, 390mA. 119 dB, 6-12 VDC operation. Weather resistant, high impact ABS housing. Dimensions: 5" H x 8" W x 6" L. Weighs only 14 oz.

120dB 30 watt self-contained siren box features red strobe light. 965mA current @ 12VDC. Dual-tone siren 6-12 VDC. Two reed tamper switches. Dimensions: 5-1/4" x 5-1/4" x 7-1/4".

110 dB high frequency warble piezo siren. 80mA. Dimensions: 1.85" x 1.5" x .9", black ABS plastic casing.

Weatherproof 8" paging horn with built-in dual mathcing transformer 70V/25V/8 ohm. 32 watts nominal input. Frequency range: 350-14,000 Hz. Line voltage: 25V & 70V selectable (screw selector). Power taps: 70V 1/2/4/8/16/32 watts. Gray aluminum housing with swivel bracket.