iconGuaranteed In Stock & Intelligent Buying Advice

icon 866-266-7638

Other

Other (3161 Items)

per page
Set Ascending Direction
  1. SENSOCON Series AFS Airflow Sensor

    SENSOCON Series AFS Airflow Sensor

    The Series AFS Air Flow Sensor is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork. It has an aero-dynamic elliptical shape resulting in a minimum pressure drop and amplified differential pressure signals which allow accurate measurement of air velocities from 300 fpm to 5000 fpm (1.5 m/s to 20 m/s). It includes multiple sensing points aligned in line grooves to measure total and static pressure. It is easy to install and cost effective. Series AFS Airflow Sensors are perfect for VAV Retrofits. The AFS is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork. The Series AFS Air Flow Sensor is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork. It has an aero-dynamic elliptical shape resulting in a minimum pressure drop and amplified differential pressure signals which allow accurate measurement of air velocities from 300 fpm to 5000 fpm (1.5 m/s to 20 m/s). It includes multiple sensing points aligned in line grooves to measure total and static pressure. It is easy to install and cost effective. Series AFS Airflow Sensors are perfect for VAV Retrofits. The AFS is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork.

  2. SENSOCON Series JFM-S - Airflow Station

    SENSOCON Series JFM-S - Airflow Station

    The Series JFM-S FloSen® Airflow Measuring Stations provide accurate, repeatable measurement of air movement in HVAC ducts. The Probes patented ellipticallyshaped sensor design with improved aerodynamic characteristics outperforms more traditional devices, and overcomes loss of accuracy caused by fluid separation at the sensor body. It is designed to maintain a constant parallel airflow pattern over the static sensing ports for more accurate, steady signals under all duct conditions. The elimination of separation results in a stabilized static pressure signal, helping to eliminate “hunting” during fan control. Ellipse vs. Round The Elliptical Advantage Flow boundary layers attached to probe surface No separation effects No vacuum effects No vortex generation Low drag coefficient High repeatability Low static pressure signal affected by separation Vacuum effects limit turndown ratio to 4 to 1 Variable intensity vortices generateddownstream, creates signal amplifications, vibrations and acoustic problems High drag coefficient creates high pressure loss FloSen® Airflow Probes used in the Sensocon Airflow Measuring Stations utilize a unique in-line groove for total pressure sensing and dual ports for static pressure sensing which produces a higher differential pressure for very low velocity measurements. The total and static pressure measuring points are distributed for equal-area averaging of flows resulting in improved accuracy and reliability. This design permits accurate and stable measurement in highly turbulent flow locations with directional pitch and yaw varying up to 20 degrees without the need for air flow straighteners which restrict airflow and can easily become clogged. The elliptical shape of the FloSen® Airflow Probes allows air to glide unrestricted around the aerodynamically designed sensors and offers the lowest pressure drop of any airflow measuring device available minimizing HVAC operating costs. The JFM-S Airflow Measuring Stations have been designed for complete installation between ducts. The quantity of FloSen® Airflow Measuring Probes selected for each Flow Station is based on ASHRAE and AMCA standards to produce assured airflow measuring accuracy over a flow turn-down ratio of 17:1.

  3. SENSOCON Series JFM-P - FloSen® Airflow Probes

    SENSOCON Series JFM-P - FloSen® Airflow Probes

    The Series JFM-P FloSen® Airflow Meassuring Probes provide accurate, repeatable measurement of air movement in HVAC ducts. Its patented elliptically-shaped sensor design with improved aerodynamic characteristics outperforms more traditional devices, and overcomes loss of accuracy caused by fluid separation at the sensor body. It is designed to maintain a constant parallel airflow pattern over the static sensing ports for more accurate, steady signals under all duct conditions. The elimination of separation results in a stabilized static pressure signal, helping to eliminate “hunting” during fan control. FloSen® Airflow Probes utilize a unique in-line groove for total pressure sensing and dual ports for static pressure sensing which produces a higher differential pressure for very low velocity measurements. The total and static pressure measuring points are distributed for equal-area averaging of flows resulting in improved accuracy and reliability. This design permits accurate and stable measurement in highly turbulent flow locations with directional pitch and yaw varying up to 20 degrees without the need for air flow straighteners which restrict airflow and can easily become clogged. The elliptical shape of the FloSen® Airflow Probes allows air to glide unrestricted around the aerodynamically designed sensors and offers the lowest pressure drop of any airflow measuring device available minimizing HVAC operating costs. The FloSen® Airflow Probes have been designed for easy installation and maintenance. The insertion-style probes can be completely installed from outside the duct. The quantity of FloSen® Airflow Measuring Probes selected for each duct size is based on ASHRAE and AMCA standards to produce assured airflow measuring accuracy over a flow turn-down ratio of 17:1.

  4. SENSOCON Series VTP - Air Velocity Transmitter

    SENSOCON Series VTP - Air Velocity Transmitter

    The Series VTP Multi Range Air Velocity Transmitter can simultaneously display and output Air Velocity, Temperature and Pressure (optional). This is the first product to combine all 3 variables in one transmitter making the VTP an exceptional option for multi-variable measuring. The VTP utilizes an industrial 316 Stainless Steel armored RTD sensor as the thermal air velocity measuring component. Using a fully protected 316 SS sensor drastically extends the life of the air velocity sensor and also makes it insensitive to water, dust or corrosion. The VTP comes standard with a LCD and can simultaneously display air velocity, temperature, and pressure. The VTP is easily configured or adjusted in the field with the digital display and keypad. The Air Velocity Range and Pressure Range are both field adjustable as well as units of measure. Other adjustable parameters include signal dampening and low velocity cut off point. The VTP Air Velocity Transmitter can also be configured to measure and totalize flow in CFM or M3/h by entering the duct area where the measurement is taken. Installation of the VTP Air Velocity Transmitter is easy with the adjustable depth, removable flange. The standard product includes an integral design, but is also available with a remote mounted probe to accommodate any application.

  5. SENSOCON Siren™ Airflow Alarm

    SENSOCON Siren™ Airflow Alarm

    • High Visibility Status Indication • Quick Installation • Standard Night Set Back • Audible Alarm • Multiple Mounting Options The Series AFA Siren™ Air Flow Alarm is an airflow monitor designed to provide visual and audible indications for decreases in airflow. Its color changing LED's provide vibrant visual indication of the operating status of the unit. A crisp and clear audible alarm will sound when airflow decreases below the designated set point. The Siren™ offers multiple mounting options including bracket mounting and interlocking strips. The unit can be powered through the 6-position terminal connection or by use of a power adapter. The Siren™ offers the ability to customize the minimum velocity set point should there be a need for a set point greater than the standard 80% of operational velocity. All units come standard with a night set back option for those who are energy conscious. The Siren also fulfills the exhaust alarm requirement needed to be in compliance with NSF/ANSI Standard 49. A quick installation process, one-touch calibration, and one-touch reset make for an easy set up and easy use.

  6. SENSOCON Series 251 - Wet/Wet Differential Pressure Transmitter

    SENSOCON Series 251 - Wet/Wet Differential Pressure Transmitter

    The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

  7. SENSOCON Series 212 - Weather-Proof Differential Pressure Transmitter

    SENSOCON Series 212 - Weather-Proof Differential Pressure Transmitter

    The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

  8. SENSOCON Series 211 - Differential Pressure Transmitter

    SENSOCON Series 211 - Differential Pressure Transmitter

    The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4-20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.

  9. Zebra ZD410 Direct Thermal Printer (ZD41022-D01E00EZ)

    Zebra ZD410 Direct Thermal Printer (ZD41022-D01E00EZ)

    Zebra - ZD410 Direct Thermal Desktop Printer for labels, Receipts, Barcodes, Tags - Print Width of 2 in - USB, Ethernet Connectivity - ZD41022-D01E00EZ Ultra compact "fits anywhere" printer If you need fast, dependable printing in the most space-constrained areas, you need the ZD410. This ultra-compact "fits anywhere" printer is designed for the smallest of work spaces. When it comes to flexibility, the ZD410 shines - this printer creates high-quality labels, receipts, tags and wristbands. This super-fast printer keeps your workers productive. Deployment is a breeze as the ZD410 offers both USB and Ethernet connectivity. The ZD410 is easy to use, operate and troubleshoot, ensuring your printer is always up and running.EZ

  10. SENSOCON Series DPT - Selectable Range Differential Pressure Transmitter

    SENSOCON Series DPT - Selectable Range Differential Pressure Transmitter

    The Series DPT Multi-Range Differential Pressure Transmitter was designed specifically for the building automation and HVAC industry. With field selectable ranges down to 0.1 inches w.c., this product is ideal for monitoring building pressure, static pressure, differential pressure, or air velocity and flow. The Series DPT Differential Pressure Transmitter also has jumper selectable outputs for 4-20 mA or 0-10 V and unit selection giving additional flexibility. For a virtually maintenance free transmitter, order the optional automatic zero and the transmitter will perform its own zero point maintenance. The Multi-Range Differential Pressure Transmitter also has an optional backlit LCD for giving local indication.

  11. SENSOCON Series 104 - Differential Pressure Switch

    SENSOCON Series 104 - Differential Pressure Switch

    The Series 104 Differential Pressure Switch is a low-cost easy to use differential pressure switch for very low pressure applications. The differential pressure switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for2A @ 250V and can be set as low as 0.08” w.c. (20 Pa).

  12. SENSOCON Series Sz-5000 - Miniature Low-Cost Differential Pressure Gauge

    SENSOCON Series Sz-5000 - Miniature Low-Cost Differential Pressure Gauge

    The Series Sz-5000 is a low cost, diaphragm operated, differential pressure gauge in a miniature housing with easy access to the zero adjustment. The Sz-5000 can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 5%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

  13. SENSOCON Series S2000 - Differential Pressure Gauge

    SENSOCON Series S2000 - Differential Pressure Gauge

    - Mounts in Industry Standard Holes - Accuracy 2% - Die Cast Aluminum Housing The Series S2000 differential pressure gauges are low cost, diaphragm operated, mechanical differential pressure gauges that may be used in all applications where the Dwyer® Magnehelic® brand gages may be used. The Sensocon® Series S2000 differential pressure gauge can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

  14. SENSOCON Series B4 - Digital Differential Pressure Control

    SENSOCON Series B4 - Digital Differential Pressure Control

    The Series B4 is a 1/8 DIN digital differential pressure controller for positive, negative, and differential pressure as well as velocity and flow. The patented Series B4 Differential Pressure Controller includes (2) 8A SPDT relays, and an optional digitally scalable 4-20 mA and 0-5 V output. The programmable control allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate user preferences. The Series B4 is easily mounted in a 1/8 DIN cut-out with a panel depth of only 2.1 inches (53 mm).

  15. SENSOCON Series A4 - Digital Differential Pressure Gauge

    SENSOCON Series A4 - Digital Differential Pressure Gauge

    The Series A4 digital differential pressure controller is a patented microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A4 differential pressure controller includes (2) 8A SPDT relays and an associated programming menu that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display or uploaded using an Opti-Link™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A4 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance at a similar price.