New Items
-
FLIR Replaceable External Moisture Pin Probe
FLIR Replaceable External Moisture Pin Probe Model# MR02 Replaceable External Moisture Pin Probe for MR77
-
FLIR Extension Pole for MR77 and MR176
FLIR Extension Pole for MR77 and MR176 Model# MR04 When connected to a FLIR Moisture probe such as MR05 Impact Pin Probe or MR06 Wall Cavity Probe, the MR04 allows the user to measure moisture in wood and other building materials in difficult to reach areas from a safe distance.
-
FLIR Impact Pin Moisture Probe for MR77 and MR176
FLIR Impact Pin Moisture Probe for MR77 and MR176 Model# MR05 The FLIR MR05 upgrades your FLIR moisture meter to help you easily test for moisture in challenging spots—on rough or uneven surfaces, in corners, in hard woods or high-density materials, and even, with ease, in areas without a dry reference. Made with extra-durable pins and a metallic impact plate that can withstand hammering to drive pins into the hardest materials, the FLIR MR05 lets you tackle the toughest moisture-measurement challenges all day long. Key features include six additional sets of thick and thin pins, an external pin accessory for the FLIR moisture meter mount for extended reach, a 1/4"–20 integrated wrench on the cap to replace pins, a durable BNC connector, and a 2 m coiled cord.
-
FLIR Replacement Pins for MR77 (standard) 1.50~1.55 mm - includes (25) sets of pins
FLIR Replacement Pins for MR77 (standard) 1.50~1.55 mm - includes (25) sets of pins Model# MR05-PINS1 MR05-PINS1: Replacement Pins for MR77 (standard) 1.50~1.55 mm - Includes 25 Sets of Pins
-
FLIR Replacement Pins for MR77 (wide) 2.26~2.35 mm - includes (25) sets of pins
FLIR Replacement Pins for MR77 (wide) 2.26~2.35 mm - includes (25) sets of pins Model# MR05-PINS2 Replacement Pins for MR77 (wide) 2.26~2.35 mm - Includes 25 Sets of Pins
-
FLIR Wall Cavity Probe Model# MR06 The FLIR MR06 Wall Cavity Probe expands the functionality of your FLIR moisture meter by allowing you to easily measure insulation moisture levels within a wall cavity and the inside face of exterior walls. FLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.
-
FLIR Hammer Probe with Shoulder Bag for FLIR Moisture Meters
FLIR Hammer Probe with Shoulder Bag for FLIR Moisture Meters Model# MR07 The MR07 Hammer Probe expands the functionality of your FLIR Moisture Meter by allowing you to take measurements in subfloor through carpet, hardwood flooring, and hard materials that are difficult to penetrate with a standard pin probe.
-
FLIR Hammer and Wall Cavity Probe Combo with Shoulder Bag for FLIR Moisture Meters
FLIR Hammer and Wall Cavity Probe Combo with Shoulder Bag for FLIR Moisture Meters Model# MR08 The MR08 Hammer and Wall Cavity Probe Combo is ideal for both hammer probe and wall cavity applications. The hammer probe has an additional handle on the bottom to add convenience for angled, horizontal, and inverted hammer-probing needs. The bottom handle can be unscrewed and used as a wall cavity probe to measure the moisture level of insulation within the wall cavity and can also reach the inside face of the exterior wall. You can also install the impact plate for use with a hammer to punch the extended pins through drywall.
-
FLIR Baseboard Probe for FLIR Moisture Meters
FLIR Baseboard Probe for FLIR Moisture Meters Model# MR09 The MR09 Baseboard Probe is ideal for taking measurements in hard-to-reach areas. Probe behind baseboards, wall trim, and crown molding without requiring removal. Long, thin, flexible probes minimize needed space.
-
FLIR Moisture Meter Guard: MR77 Shield
FLIR Protective Case for MR77 for FLIR Moisture Meters Model: MR10 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. CASE ONLY - Does NOT include the equipment. Photo for illustration purposes only
-
SYMBOL DS6878-SR 2D BARCODE SCANNER KIT W/ CRADLE & USB CABLE
SYMBOL DS6878-SR 2D BARCODE SCANNER KIT W/ CRADLE & USB CABLE DS6878-TRBU0100ZWR
-
Prysmian 96CT OUTDOOR, HEAVY-DUTY FIBER F-ECH1JKT-12-ES-096-E3
96 CT Riser rated Cable OFNR
-
Motorola MC9090-GK0HJEFA6WR HANDHELD COMPUTER
Motorola MC9090-GK0HJEFA6WR HANDHELD COMPUTER
-
Motorola MC9090-GK0HJJFA6WR HANDHELD COMPUTER
Motorola MC9090-GK0HJJFA6WR HANDHELD COMPUTER
-
FLIR Protective Case for FLIR Moisture Meters (MR10-2)
FLIR Protective Case for FLIR Moisture Meters (MR10-2) Model# MR10-2 Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions.
-
FLIR Temp and Humidity External Probe
FLIR Temp and Humidity External Probe Model# MR11 - Get instant dehumidifier moisture readings, increase remediation work efficiency; pre-deploy sensors in dehumidifier exhaust Ducts and avoid need for extended acclimation times between measurements - Facilitates more accurate measurements; place sensor away from objects that may influence/ pollute the measurement - Use in locations where access is Restricted, E.G. Measure inside wall Cavity via small access hole - Better ergonomics; use standalone or with the included mounting Accessories, permanent mounting bracket and magnetic sensor mount TA52, or with the optional extension pole MR04
-
FLIR Ball Probe Moisture Meter Accessory
FLIR Ball Probe Moisture Meter Accessory Model# MR12 The FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there’s no clear presence of moisture, the MR12’s ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.
-
FLIR Replacement Temperature and Relative Humidity Sensor
FLIR Replacement Temperature and Relative Humidity Sensor Model# MR13 The FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there’s no clear presence of moisture, the MR12’s ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.
-
FLIR MR-CABLE RJ45 to BNC Cable for FLIR Moisture Meters and Accessories
FLIR MR-CABLE RJ45 to BNC Cable for FLIR Moisture Meters and Accessories Model# MR13 RJ45 to BNC Cable
-
FLIR MR-PINS2-10 2 Inch Pins for MR06, MR07 & MR08 - Includes (10) pairs
FLIR 2 Inch Pins for MR06, MR07 & MR08 - Includes (10) pairs Model# MR-PINS2-10 • 10 pairs of 2" Pins • Fits Hammer, Wall Cavity and Combo Probes • Unibody construction vs. two piece • Smaller diameter pins • Sandblasted hardened steel • Insulated with abrasion resistant coating
-
FLIR MR-PINS4 4 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair
FLIR MR-PINS4 4 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair Model# MR-PINS4 FLIR’s new insulated pins are smaller in diameter - requiring minimal force to drive the pins into a surface - resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improve d bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.
-
FLIR MR-PINS6 6 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair
FLIR MR-PINS6 6 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair Model# MR-PINS6 ‣ 1 pair of 6" Pins ‣ Fits Hammer, Wall Cavity and Combo Probes ‣ Unibody construction vs. two piece ‣ Smaller diameter pins ‣ Sandblasted hardened steel ‣ Insulated with abrasion resistant coating
-
FLIR TA02 Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176
FLIR TA02 Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176 Model# TA02 ‣ Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176 ‣ 120V Power Adapter ‣ For TG165/167 MR60/160/176