Hospital Electronics

Olympus BF-P180 #157, uses 260: Needs Insertion tube, biopsy channel, C-cover **Photo for illustrative purpose only**

Dyonics 7210716 30 degrees 4mm VIDEO ARTHROSCOPE W. 4491 Diagnostic Cannula

ECHELON ENDOPATH FLEX 45MM ARTICULATING STANDARD STAPLER, 340MM, 3/BX.

GE ivent 201i Ventilator Invasive/Non-Invasive Pediatric/Adult configuration - Units are in Excellent Condition - Biomed tested and certified - Units are calibrated, tested and certified with TSI FA Plus Certifier - Delivered with performance verification record - Units are patient ready

Ethicon K12LT ENDOPATH TROCAR KIT 12MM

Ethicon D11LT ENDOPATH XCEL Dilating Tip Trocar 11MM

Ethicon K11LT ENDOPATH TROCAR KIT 11MM

Ethicon CB5LT ENDOPATH XCEL Stability Sleeve 5MM

Ethicon D12XT ENDOPATH XCEL Dilating Tip Trocar

Ethicon B15LT ENDOPATH XCEL™ Bladeless Trocar15MM

Ethicon B11LT XCEL STABILITY SLEEVE Trocar11mm

Ethicon D5LT ENDOPATH XCEL Dilating Tip Trocar 5MM

Ethicon D5ST ENDOPATH XCEL Dilating Tip Trocars With Stability Sleeve 5MM-75MM

ETHICON B5ST ENDOPATH XCEL TROCAR: BLADELESS TROCAR WITH STABILITY SLEEVE 5MM - 75MM

Optical Entry • Visualization is optically guided by a 0° endoscope • Enables visualization of tissue layers during insertion Durable Universal Seal • No reducer caps needed • Maintains insufflation • Accommodates a wide range of instrument sizes (4.7mm to 12.9mm) Funnel Lead-In • Enables smooth, one-handed instrument exchange Release Lever • Unlocks housing to facilitate large specimen removal Camera Scope-Locking Tab • Holds camera locked in place during visually guided entry • Helps provide visual clarity and protects camera from scratching or falling out Recessed Stopcock Valve • Mitigates inadvertent opening/closing of valve during surgery Low-Profile Housing • Enables further instrument reach Integrated Stability Thread Design • Maximizes abdominal wall retention for minimal trocar slip-outs Bladeless Optical Tip • Reduced need for fascial closure • May result in a low port site herniation rate • Separates, rather than cuts, along tissue fibers, pushing tissue and vessels away • Reduced risk of abdominal wall vasculature injuries with bleeding complications

STAPLER, PREM PLUS CEEA 28 - Stapler designed to place a circular, double staggered row of titanium staples - Knife blade resects excess tissue after staple formation to help create circular anastomosis - Tilt-Top anvil permanently affixed to center rod - Squeeze-handle activation

STAPLER, PREM PLUS CEEA 25 - Stapler designed to place a circular, double staggered row of titanium staples - Knife blade resects excess tissue after staple formation to help create circular anastomosis - Tilt-Top anvil permanently affixed to center rod - Squeeze-handle activation

Reliable. Secure. Consistent. Improved performance. The enhanced LIGACLIP Endoscopic Rotating Multiple Clip Applier maintains expected tissue effects and ease of use through its: enhanced end effector which reduces dropped clips and clip scissoring extended lower shroud supports good clip formation, and rotating knob enables 360-degree rotation and one-handed use. Superior Jaw Security Stronger jaws for better clip formation. With 35% stronger jaws, the LIGACLIP Endoscopic Rotating Multiple Clip Applier provides better clip formation and better in-jaw clip security. Superior Clip Formation Reduced clip scissoring for better ligation. By offering 85% reduction in clip scissoring, use of LIGACLIP Endoscopic Rotating Multiple Clip Applier results in superior on-vessel clip performance. Tip Cover Designed for Better Protection Refreshed design allows for easier removal, more secure shipping. The new, vinyl-free tip cover of the LIGACLIP Endoscopic Rotating Multiple Clip Applier is designed to offer better protection during shipping and easier removal during device preparation.

Karl Storz H3Z Camera Head (222200-55)

Covidien EEAXL21 EEA AutoSuture Circular Stapler

A cordless, hand-held, pistol-grip ultrasonic device for use on open and laparoscopic procedures for soft-tissue dissection and vessel coagulation.

FLIR ETS320 w/45° Lens, 320x240, -20°C to +250°C, w/FLIR Thermal Studio Model# 63950-1001 FLIR ETS320 Whether the goal is product testing or scientific research, heat can be an important indicator of how a system is functioning. The FLIR ETS320 is a non-contact thermal measurement system that pairs a high-sensitivity infrared camera with an integrated stand, for hands-free measurement of printed circuit boards and other small electronics. FLIR ETS320 Offers The first FLIR camera designed for quick temperature checks on PCB boards and electronic devices in the lab. Reduce test times & improve product design, and take the guesswork out of thermal testing across more than 76,000 points at once with the sensitive, accurate 320 x 240 detector with the FLIR ETS320 that is designed for hands-free laboratory testing. Whether the goal is R&D or product testing, heat can be an important indicator of how a system is functioning. This system helps engineers and test technicians collect accurate, reliable data in seconds and analyze it quickly. Engineered specifically for lab electronics testing, the ETS320 is battery powered and hands free, and connects via USB to your PC for immediate analysis and sharing of thermal data. FLIR Thermal Studio Pro will help you manage thousands of thermal images and videos, whether they're from a handheld camera, unmanned aircraft system (UAS), or optical gas imaging (OGI) camera. This software offers the advanced processing features you need to survey critical components quickly, troubleshoot systems, and increase productivity. Use the optional FLIR Route Creator plug-in to streamline your workflow by creating an inspection path you can download directly to any FLIR T-Series camera with Inspection Route enabled. These routes will help you acquire data and thermal images in a logical sequence and maintain historical records for improved predictive maintenance. Available in more than 20 languages, FLIR Thermal Studio Pro offers simplified image processing so you can spend more time in the field than at your desk. FLIR Thermal Studio Pro is available as a 12-month subscription. Features • 320 x 240 pixel IR detector • 45° field of view • Crisp 3" LCD display provides immediate thermal feedback • Thermal sensitivity (NEtD) of 0.06°C • Temperature measurement accuracy of ±3°C • Wide temperature range, up to 250°C • Records standard radiometric JPEGs • Ergonomically designed for benchtop use Applications • Laboratory work • Product development/testing • Research & development • Thermal testing

- The fogger’s head at the end of the hose, adjustable to any angle, instant switching on/off, efficient and convenient. - High power motor, super speed sprayer. - Quick spraying, solution and labor saving. - Rotating spraying, without any blocking. - Patented technology adopted to prevent the solution from flowing back after power off. SPECIFICATIONS: Flow Rate: 29 Liter per hour Motor: 220 V/110V Power: 1000 W Tank Capacity: 5 Liter (1.32 Gallon) Dimensions: 56×24×32 cm (22×9.4×12.5 in) Particle size:10-150 μm (Adjustable) Effective range: 3-8 m (9.4-26.2 ft) Weight: 2.61/3.78 Kg (5.75/8.33 lb)

FLIR AX8 (9 Hz) 48° Model# 71201-0101 THERMAL IMAGING CAMERA FOR CONTINUOUS CONDITION AND SAFETY MONITORING FLIR AX8 combines thermal imaging with a visual cameras in one small, affordable package for continuous temperature monitoring and alarming. The AX8 helps you guard against unplanned outages, service interruptions, and failure of electrical or mechanical equipment. Compact and easy to install, the AX8 provides continuous monitoring of electrical cabinets, process and manufacturing areas, data centers, energy generation and distribution, transportation and mass transit, storage facilities and refrigeration warehouses. AUTOMATIC ANALYSIS AND ALARMS Streaming video output means the AX8 can provide live video of every installation plus automated alarming. INDUSTRIAL PROTOCOLS Ethernet/IP and Modbus TCP compliant so analysis and alarm results can be easily shared to a PLC. COMPACT AND EASY TO INSTALL The AX8 measures only 54 x 25 x 95 mm, making it easy to install in space constrained areas for uninterrupted condition monitoring.