Level 2 Gowns. (although independently tested to Level 3 and 4)
Made in USA, sourced from USA mater...
Level 2 Gowns. (although independently tested to Level 3 and 4)
Made in USA, sourced from USA materials
Tested for compliance with ANSI/AAMI PB70:2012
Minimal Barrier Performance Level 1, Level 2, and
Level 3 requirements
• Easy to put on and take off
• Gap in end of sleeve seal for thumb
• Long sleeve, full coverage
• Made from polyethylene (Virgin LLDPE)
• Thickness - 1.5 mil
• This product is a Class I device
• Gown intended for single use ONLY.
• This product is intended for non-surgical use ONLY.
• This product is NOT sterilized.
• Do NOT use in the presence of high intensity heat
source or flammable gas.
Non-Surgical Isolation Gowns - T Style
These products have been authorized by FDA
under an Emergency Use Authorization for use by
healthcare providers as personal protective
equipment. This product is only authorized for
the duration of the declaration that circumstances
justifying the authorization of emergency use
under Section 564(b)(1) of the Act, 21 USC
360bbb-3(b)(1).
Product Name: Non Surgical Isolation Level 2 Gowns
Description:
Level 2 Gowns. (although independently tested to Level 3 and 4)
Made in USA, sourced from USA materials
Tested for compliance with ANSI/AAMI PB70:2012
Minimal Barrier Performance Level 1, Level 2, and
Level 3 requirements
• Easy to put on and take off
• Gap in end of sleeve seal for thumb
• Long sleeve, full coverage
• Made from polyethylene (Virgin LLDPE)
• Thickness - 1.5 mil
• This product is a Class I device
• Gown intended for single use ONLY.
• This product is intended for non-surgical use ONLY.
• This product is NOT sterilized.
• Do NOT use in the presence of high intensity heat
source or flammable gas.
Non-Surgical Isolation Gowns - T Style
These products have been authorized by FDA
under an Emergency Use Authorization for use by
healthcare providers as personal protective
equipment. This product is only authorized for
the duration of the declaration that circumstances
justifying the authorization of emergency use
under Section 564(b)(1) of the Act, 21 USC
360bbb-3(b)(1).
Level 2 Gowns. (although independently tested to Level 3 and 4)
Made in USA, sourced from USA materials
Tested for compliance with ANSI/AAMI PB70:2012
Minimal Barrier Performance Level 1, Level 2, and
Level 3 requirements
• Easy to put on and take off
• Gap in end of sleeve seal for thumb
• Long sleeve, full coverage
• Made from polyethylene (Virgin LLDPE)
• Thickness - 1.5 mil
• This product is a Class I device
• Gown intended for single use ONLY.
• This product is intended for non-surgical use ONLY.
• This product is NOT sterilized.
• Do NOT use in the presence of high intensity heat
source or flammable gas.
Non-Surgical Isolation Gowns - T Style
These products have been authorized by FDA
under an Emergency Use Authorization for use by
healthcare providers as personal protective
equipment. This product is only authorized for
the duration of the declaration that circumstances
justifying the authorization of emergency use
under Section 564(b)(1) of the Act, 21 USC
360bbb-3(b)(1).
Product Name: Non Surgical Isolation Level 2 Gowns
Description:
Level 2 Gowns. (although independently tested to Level 3 and 4)
Made in USA, sourced from USA materials
Tested for compliance with ANSI/AAMI PB70:2012
Minimal Barrier Performance Level 1, Level 2, and
Level 3 requirements
• Easy to put on and take off
• Gap in end of sleeve seal for thumb
• Long sleeve, full coverage
• Made from polyethylene (Virgin LLDPE)
• Thickness - 1.5 mil
• This product is a Class I device
• Gown intended for single use ONLY.
• This product is intended for non-surgical use ONLY.
• This product is NOT sterilized.
• Do NOT use in the presence of high intensity heat
source or flammable gas.
Non-Surgical Isolation Gowns - T Style
These products have been authorized by FDA
under an Emergency Use Authorization for use by
healthcare providers as personal protective
equipment. This product is only authorized for
the duration of the declaration that circumstances
justifying the authorization of emergency use
under Section 564(b)(1) of the Act, 21 USC
360bbb-3(b)(1).
Is Your Equipment Broken?
Utilize Service and Maintenance Expertise with Surplus Traders:
When in need of service and repair for your equipment, make Surplus Traders your initial point of contact. While discarding the item might be a consideration, our cost-effective repair and maintenance services can swiftly restore your product to optimal functionality, akin to its original state. This approach allows you to economize both in terms of finances and time. Additionally, you avoid the hassle of sourcing compatible and pricey replacements for your system.
At Surplus Traders, we conduct repairs using genuine OEM parts, ensuring a restoration process that guarantees 100% uptime for your equipment. We boast a team of certified repair technicians with comprehensive expertise in servicing a diverse range of equipment and devices available in the market. We emphasize the preservation and repair of equipment to minimize waste and support sustainable practices.
Do not discard your equipment hastily. Reach out to our dedicated equipment hotline today to obtain a quote for any required service and maintenance. Surplus Traders provides flat-rate repair services for Barcode and Point of Sale (POS) equipment, as well as various other digital and industrial machinery. Furthermore, we offer flexible repair and maintenance contracts spanning 1, 2, or 3 years, featuring rapid turnaround times to suit your requirements.
In summary, instead of prematurely disposing of your equipment, contact Surplus Traders today to benefit from our expertise and commitment to efficient repairs.