iconGuaranteed In Stock & Intelligent Buying Advice

icon 866-266-7638
Toggle Nav
    • icon icon Repair Your Equipment icon
  • Compare Products
My Cart Cart ()
Account

DALE601 ELECTRICAL SAFETY ANALYZER

NEW UNIT comes with one-year manufacture warranty against defect and workmanship. Description ...
Read More
  • Product SKU: WB430
  • Product Name: DALE601 ELECTRICAL SAFETY ANALYZER
  • Manufacturer: -ASSORTED
Description:

NEW UNIT comes with one-year manufacture warranty against defect and workmanship.
Description
The DALE601 Electrical Safety Analyzer is the industry's lowest priced full function Electrical Safety Analyzer.
Unique to the DALE601 is its capability to make a broad range of external measurements. A clearly labeled single master function switch guides the user through a complete measurement procedure.
The DALE601 measures Line Voltage, Instrument Current, Ground Resistance, Earth and Chassis Leakage Current, Patient Lead-to-Ground, Lead-to-Lead and Lead Isolation (M.A.P.) Current, External Gradient, Probe and Transducer Isolation Current and Point-to-Point Resistance.
The device also tests all 120-volt standard wall outlets for the proper wiring. The green and an amber light indicate five normal or fault conditions.
Heavy-duty switches change polarity, open and close the neutral and select Chassis or Earth Leakage Current measurements. A four-wire Kelvin bridge eliminates reading errors in resistance due to cable length and contact resistance. True RMS measurements are provided for all current readings. The AAMI test load is utilized.
The DALE601 has five (5) universal EKG lead connectors that allow for any type of lead connection.There is also a single slide switch that gives the user a choice of AAMI or IEC test load.
Features
* Small, lightweight, self-contained portable instrument
* Master range meter delivers accurate measurment for each test
* Accurate test measurements with 4-wire Kelvin bridge
* Test method complies with AAMI load per ANSI/AAMI ES1-1993 or IEC601-1
* Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground.
* All Leakage Current measurements are displayed directly in ?Amps.
* Broad range of external measurements
* Five (5) Universal EKG Lead Connectors
* The DALE601 is designed for 120 V operation
Specifications
Mains Voltage
117 Volts, 50/60 Hz
Instrument Current
Range: 0 - 19.99 Amps.
Resolution: 10 mA
Accuracy: 5 % R
Ground (Earth) Resistance
Range: 0 - 1.99. Accuracy: 1% R +/- 1 LSD
2 - 19.99. Accuracy: 2 % R +/- 1 LSD
Resolution: 10 mOhms
Leakage Current
Range: 0 - 1999 ?Amp
Resolution: 1 ?Amp
Accuracy: 1% R +/- 1 LSD
Frequency:
DC & 25 Hz - 1kHz: 1.0% R
1KHz - 100 KHz: 2.5% R
100 KHz - 1 MHz: 5% R
Controls
1. Function Switch - 9 position rotary
2. Lead Switch - 6 position rotary
3. Neutral Switch - 2 position rocker (Open/Closed)
4. Polarity Switch - 3 position rocker (Normal/Off/Reversed)
5. Leakage Switch - 2 position rocker (Chassis/Earth)
DUT Power
117 VAC, 16 Amps@ 120 V, 10 Amps @ 230 V
Physical Size:
4.0 x 7.8 x 1.6 inches (102 x 196 x 41 mm)
Condition: New

  • Product Availability: Available
SKU
WB430

Read Our Reviews

4.4
Based on 2714 reviews from certified buyers.
  • Thank you Marshall

    Marshall found a replacement part for half the price. Ask them.

    By John Carter on

  • Great Service

    Had to use my warranty and had no issues with the new shipment, thanks.

    By Robert Hicks on

  • Until next time

    Surplustraders and the people behind it is what really makes the industry go forward..

    By Jamie Hall on

Add to Wishlist
main product photo
NEW UNIT comes with one-year manufacture warranty against defect and workmanship.
Description
The DALE601 Electrical Safety Analyzer is the industry's lowest priced full function Electrical Safety Analyzer.
Unique to the DALE601 is its capability to make a broad range of external measurements. A clearly labeled single master function switch guides the user through a complete measurement procedure.
The DALE601 measures Line Voltage, Instrument Current, Ground Resistance, Earth and Chassis Leakage Current, Patient Lead-to-Ground, Lead-to-Lead and Lead Isolation (M.A.P.) Current, External Gradient, Probe and Transducer Isolation Current and Point-to-Point Resistance.
The device also tests all 120-volt standard wall outlets for the proper wiring. The green and an amber light indicate five normal or fault conditions.
Heavy-duty switches change polarity, open and close the neutral and select Chassis or Earth Leakage Current measurements. A four-wire Kelvin bridge eliminates reading errors in resistance due to cable length and contact resistance. True RMS measurements are provided for all current readings. The AAMI test load is utilized.
The DALE601 has five (5) universal EKG lead connectors that allow for any type of lead connection.There is also a single slide switch that gives the user a choice of AAMI or IEC test load.
Features
* Small, lightweight, self-contained portable instrument
* Master range meter delivers accurate measurment for each test
* Accurate test measurements with 4-wire Kelvin bridge
* Test method complies with AAMI load per ANSI/AAMI ES1-1993 or IEC601-1
* Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground.
* All Leakage Current measurements are displayed directly in ?Amps.
* Broad range of external measurements
* Five (5) Universal EKG Lead Connectors
* The DALE601 is designed for 120 V operation
Specifications
Mains Voltage
117 Volts, 50/60 Hz
Instrument Current
Range: 0 - 19.99 Amps.
Resolution: 10 mA
Accuracy: 5 % R
Ground (Earth) Resistance
Range: 0 - 1.99. Accuracy: 1% R +/- 1 LSD
2 - 19.99. Accuracy: 2 % R +/- 1 LSD
Resolution: 10 mOhms
Leakage Current
Range: 0 - 1999 ?Amp
Resolution: 1 ?Amp
Accuracy: 1% R +/- 1 LSD
Frequency:
DC & 25 Hz - 1kHz: 1.0% R
1KHz - 100 KHz: 2.5% R
100 KHz - 1 MHz: 5% R
Controls
1. Function Switch - 9 position rotary
2. Lead Switch - 6 position rotary
3. Neutral Switch - 2 position rocker (Open/Closed)
4. Polarity Switch - 3 position rocker (Normal/Off/Reversed)
5. Leakage Switch - 2 position rocker (Chassis/Earth)
DUT Power
117 VAC, 16 Amps@ 120 V, 10 Amps @ 230 V
Physical Size:
4.0 x 7.8 x 1.6 inches (102 x 196 x 41 mm)
Condition: New
Product Details
  • Product SKU: WB430
  • Product Name: DALE601 ELECTRICAL SAFETY ANALYZER
  • Manufacturer: -ASSORTED
Description:

NEW UNIT comes with one-year manufacture warranty against defect and workmanship.
Description
The DALE601 Electrical Safety Analyzer is the industry's lowest priced full function Electrical Safety Analyzer.
Unique to the DALE601 is its capability to make a broad range of external measurements. A clearly labeled single master function switch guides the user through a complete measurement procedure.
The DALE601 measures Line Voltage, Instrument Current, Ground Resistance, Earth and Chassis Leakage Current, Patient Lead-to-Ground, Lead-to-Lead and Lead Isolation (M.A.P.) Current, External Gradient, Probe and Transducer Isolation Current and Point-to-Point Resistance.
The device also tests all 120-volt standard wall outlets for the proper wiring. The green and an amber light indicate five normal or fault conditions.
Heavy-duty switches change polarity, open and close the neutral and select Chassis or Earth Leakage Current measurements. A four-wire Kelvin bridge eliminates reading errors in resistance due to cable length and contact resistance. True RMS measurements are provided for all current readings. The AAMI test load is utilized.
The DALE601 has five (5) universal EKG lead connectors that allow for any type of lead connection.There is also a single slide switch that gives the user a choice of AAMI or IEC test load.
Features
* Small, lightweight, self-contained portable instrument
* Master range meter delivers accurate measurment for each test
* Accurate test measurements with 4-wire Kelvin bridge
* Test method complies with AAMI load per ANSI/AAMI ES1-1993 or IEC601-1
* Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground.
* All Leakage Current measurements are displayed directly in ?Amps.
* Broad range of external measurements
* Five (5) Universal EKG Lead Connectors
* The DALE601 is designed for 120 V operation
Specifications
Mains Voltage
117 Volts, 50/60 Hz
Instrument Current
Range: 0 - 19.99 Amps.
Resolution: 10 mA
Accuracy: 5 % R
Ground (Earth) Resistance
Range: 0 - 1.99. Accuracy: 1% R +/- 1 LSD
2 - 19.99. Accuracy: 2 % R +/- 1 LSD
Resolution: 10 mOhms
Leakage Current
Range: 0 - 1999 ?Amp
Resolution: 1 ?Amp
Accuracy: 1% R +/- 1 LSD
Frequency:
DC & 25 Hz - 1kHz: 1.0% R
1KHz - 100 KHz: 2.5% R
100 KHz - 1 MHz: 5% R
Controls
1. Function Switch - 9 position rotary
2. Lead Switch - 6 position rotary
3. Neutral Switch - 2 position rocker (Open/Closed)
4. Polarity Switch - 3 position rocker (Normal/Off/Reversed)
5. Leakage Switch - 2 position rocker (Chassis/Earth)
DUT Power
117 VAC, 16 Amps@ 120 V, 10 Amps @ 230 V
Physical Size:
4.0 x 7.8 x 1.6 inches (102 x 196 x 41 mm)
Condition: New

Is Your Equipment Broken?

Utilize Service and Maintenance Expertise with Surplus Traders:

When in need of service and repair for your equipment, make Surplus Traders your initial point of contact. While discarding the item might be a consideration, our cost-effective repair and maintenance services can swiftly restore your product to optimal functionality, akin to its original state. This approach allows you to economize both in terms of finances and time. Additionally, you avoid the hassle of sourcing compatible and pricey replacements for your system. At Surplus Traders, we conduct repairs using genuine OEM parts, ensuring a restoration process that guarantees 100% uptime for your equipment. We boast a team of certified repair technicians with comprehensive expertise in servicing a diverse range of equipment and devices available in the market. We emphasize the preservation and repair of equipment to minimize waste and support sustainable practices. Do not discard your equipment hastily. Reach out to our dedicated equipment hotline today to obtain a quote for any required service and maintenance. Surplus Traders provides flat-rate repair services for Barcode and Point of Sale (POS) equipment, as well as various other digital and industrial machinery. Furthermore, we offer flexible repair and maintenance contracts spanning 1, 2, or 3 years, featuring rapid turnaround times to suit your requirements. In summary, instead of prematurely disposing of your equipment, contact Surplus Traders today to benefit from our expertise and commitment to efficient repairs.

Reach us at 1-866-266-7638 or via email at repairs@surplustraders.net