Printed Circuit Boards

Ors2v 1200dpi Pu PCB

1 x UPK 634490-90 REV-4 1x UBA 634275 REV-6 1 x UBA 634275-90 REV-6 1 x UIL 635318-90 REV-1 1 x UCE 634262-90 REV-11 1 x UAF 634484-90 REV 7 1 x UPX 635537 REV-E2 1 x UPV 635531 REV-2 1 xUCQ 634951 REV-3 2 x UME 634978-90 REV-4 PCB with VDZ DAUGHTERBOARD 1 x UME 634978-90 REV-3 PCB with VDZ DAUGHTERBOARD 1 x UPW 635533-9002 1 x UOD 634347-90 REV-3 1x UCJ 634385-90 REV-E7

General purpose strip-board has holes in patterns of 6, spaced on 0.10" centers, .037" in dia., and has inter-leaved power & ground rails to permit easier distribution of power for circuit. Accepts 96-pin DIN-41612 VME connector for board-to-board or backplane connections and holes are provided for latches. Etched FR-4 glass-epoxy w/one oz. copper on both sides, tinned. Dimensions: 3.9" x 6.3" x 1/16". 38 rows by 62 columns of holes, total.

Busboard that includes footprints to accommodate DB-9, handset & sub-mini jacks, BNC and DB-25 jacks, two phone jacks & coaxial power jack, as well as an SPDT switch. Zigzag circuit patter for ICs & all standard components. 76 separate copper traces with .037" dia. holes on 0.10". RoHS compliant.

Prototyping board has holes in copper patterns in groups of 6, spaced on 0.10" centers & .037" diameter. Total holes 38 rows x 62 columns. Etched FR-4 glass-epoxy w/one oz. copper tinned for better soldering. 3.9" x 6.3" x 1/16".

Positive acting, presensitized PC boards using FR-4 fiberglass substrate. In sizes 2 x 2" to 12 x 12" and 1/16" or 1/32" thickness. The 2 oz. boards have twice the standard thickness of copper. Part No. Size Copper Wt./sides Thickness GF190 2" x 4" 1 oz./one 1/16" GF191 3" x 4" 1 oz./one 1/16" GF192 3" x 4" 1 oz./two 1/16" GF193 3" x 6" 1 oz./one 1/16" GF194 4" x 6" 1 oz./one 1/16" GF195 4" x 6" 1 oz./one 1/32" GF196 4" x 6" 1 oz./two 1/32" GF197 6" x 6" 1 oz./one 1/16" GF198 6" x 6" 1 oz./two 1/16" GF199 6" x 9" 1 oz./one 1/16" GF200 6" x 9" 1 oz./two 1/16" GF201 6" x 9" 1 oz./one 1/32" GF202 6" x 9" 1 oz./two 1/32" GF203 6" x 12" 2 oz./one 1/16" GF204 6" x 12" 2 oz./two 1/16" GF205 7" x 10" 1 oz./one 1/16" GF206 12" x 12" 1 oz./one 1/16" GF207 12" x 12" 1 oz./two 1/16"

These strip protoboards can be cut to make smaller boards. Copper strips on one side, there are 0.40" dia. holes on 0.10" centers which accept common component leads. Dimensions: 3 15/16" W x 6 5/16" L. Also available in 9 13/16" lengh - ask for GF161.

Double-sided board of etched FR-4 glass epoxy, one ounce copper on both sides and tinned for easy soldering. Every fifth pad is square for easy alignment of components. Accepts 96 pin DIN-41612 VME connector; holes provided for latches. 38 rows by 62 columns of holes, total board size is 3.9" x 6.3" x 1/16". RoHS compliant.

Medium-size protoboards are 5.16" x 1.90". Forty-five rows of holes arranged so IC's can straddle center of board. Each IC pin has 5 pads for connection to other components. Part No. Type GF146 Phenolic GF147 Fiberglass

4.30" by 5.50" protoboards. 1,900+ holes/pads to accommodate large circuits. Sized for standard, leaded components on 1/10" centers. Components side imprinted w/ink; bright copper accepts solder readily. Part No. Type GF149 Phenolic GF150 Fiberglass

FR-4 fiberglass, board, solder masked and standard height: Eurocard/VME size. Zigzag circuit pattern, with holes drilled on 0.1" center that are .037" diameter to accommodate all IC’s & square post headers. 38 by 62 holes in 76 separate copper traces. Standard, 1 ounce copper is used. Dimensions: 3.9" wide, 6.3" long and 1/16" thickness. RoHS compliant.

These general purpose protoboards are 1.8" W x 3.6" L and feature drilled copper pads connected in groups of two & three. Accommodates transistors & common passive components. Part No. Type GF114 Phenolic GF115 Fiberglass

General purpose protoboards are only 1.8" wide by 3.6" long and are scored for easy separation when only one very small board is needed. Matrix of single holes on 1/10" centers. Copper on one side. Available in two types. Part No. Type GF092 Phenolic GF093 Fiberglass

Small IC protoboard accommodates standard DIP IC's. Copper on one side with hole spacing on 1/10" centers. 1.8" x 3.6" with scoring to break into two, smaller identical boards. Part No. Type GF095 Phenolic GF096 Fiberglass