iconGuaranteed In Stock & Intelligent Buying Advice

icon 866-266-7638

Communications

We offer communications equipment (also telecoms equipment or telecommunications equipment) considered as hardware used for the purposes of telecommunications. Since the 1990s the boundary between telecoms equipment and IT hardware has become blurred as a result of the growth of the internet and its increasing role in the transfer of telecoms data. Surplustraders.net built on longstanding and ongoing collaborative relationships with global equipment manufacturers, service providers and infrastructure operators, Surplustraders.net has become a leading technology provider to the communications and telecom industry. The breath of its product offerings gives testament to the depth of its expertise across all foundational communications technologies of the signal chain, from digital embedded processing, multicore DSPs and complex SoCs, to all manners of analog and mixed-signal technology, such as data converters, amplifiers, RF, clocking, and power supply and control. Surplustraders.net’s portfolio touches every corner of the communications industry, including infrastructure and mobile device-oriented technologies, multimedia processing, power control and management, networking, voice, video, wired and wireless.

Communications (1309 Items)

per page
Set Ascending Direction
  1. SIEMENS PHONE SYSTEMS

    SIEMENS PHONE SYSTEMS

    S30807-U5491-X-10- BS4 Dect Base Station Handset 122922-453- Commander Optipoint 500 Advance HiPath 3550- multiple output phone board (master to slave) L30250-F600-A734- Optipoint 420 Standard S7104-A107-24- Telco Optipoint 500 Advance S7103-A107-22- Optipoint 500 Standard S7201-A101-24- Optipoint 410 Entry S7203-A101-25- Optipoint 410 Standard S7207-A107-22- Optipoint 420 Advance S7211-A107-14- Optipoint 420 Standard S7210-A107-15- Optipoint 420 Economy Plus

  2. MITEL

    MITEL

    50001271- Network Device 3300 Universal NSU, 5 x RJ45 Ports, 1 x RX Port, 1 x TX Port, 1 x 9 Pin Maintenance Port, Uses Standard PC Power Cable 50002211- Network Device 3300 Controller, 6 x RJ45 Ports, 2 x RX Ports, 2 x TX Ports, 1 x 9 Pin Maintenance Port, 1 x 9 Pin Printer Port, 1 x 9 Pin Alarm Port, 4 x Expansion Module Bays (2 Used), Uses Standard PC Power Cable 50001271- Network Device 3300 Universal NSU, 5 x RJ45 Ports, 1 x RX Port, 1 x TX Port, 1 x 9 Pin Maintenance Port, Uses Standard PC Power Cable 50002211- Network Device 3300 Controller, 6 x RJ45 Ports, 2 x RX Ports, 2 x TX Ports, 1 x 9 Pin Maintenance Port, 1 x 9 Pin Printer Port, 1 x 9 Pin Alarm Port, 4 x Expansion Module Bays (2 Used), Uses Standard PC Power Cable 50000730- Switch Option CeptInterface Assembly Card 50003560- Switch Option l 3300 Embedded Digital Trunk Module 50003725- Switch Option Analogue Option Card (6LS/2ONS) 50004070- Switch Option Quad BRI MMC 9400-300-301-NA Switch Option Fiber Interface Module MA225AA- Switch option Primary Rate Interface Assembly Cards 50000730- Switch Option CeptInterface Assembly Card 50003560- Switch Option 3300 Embedded Digital Trunk Module 50003725- Switch Option Analogue Option Card (6LS/2ONS) 50004070- Switch Option Quad BRI MMC 9400-300-301-NA Switch Option l Fiber Interface Module MA225AA Switch option Primary Rate Interface Assembly Cards

  3. RF Adapter Cable with TNC Connector

    RF ADAPTER CABLE WITH TNC CONNECTOR

    QTY-10076 RF Adapter Cable with TNC Connector. The adapter cable is for connecting an antenna to a phone or device that has no direct antenna connection or port. This adapter cable (IAC 098) will work with any device or phone inductively. One end, the TNC Male connection can connect to the end of an antenna cable, or to a device or router if it has a direct connect port. The black side, where the copper is located can be laid on the phone or device to transmit inductively to the device the RF signal. Also, it can be used as an antenna by placing the black side on a window to pick up the RF signal. Body size 3"L x 1"W, cable length 45". Looking for partial or take all offers.

  4. 4dBi Elbow Wide-Band Antenna

    4DBI ELBOW WIDE-BAND ANTENNA

    4dBi Elbow Wide-Band Antenna works with: GSM / CDMA / PCS / DCS / UMTS/ WCDMA / LTE. Frequency band: 700 MHz - 2700 MHz, Gain: 4.2dBi, 50 Ohm, Vertical polarization. Antenna has a max power handling of 50W. VSWR: 1.5:1 (Cellular) / 2.0:1 (PCS). Vertical Beamwidth of 15°, Horozontal Beamwidth of 360°. TNC type male connector. The casing material is UV resistant ABS. Radiation patterns are as follows: 1) Vertical: E-plane co-pol 4-dB beam-with=15 Deg. 2) Horizontal: E-plane co-pol 4-dB beam-with=360 Deg. QTY-13324 in Black, QTY-1500 in White. Looking for partial or take all offers.