AD022
Click the graphic to visit ONLYBATTERIES.COM
TS795
|
Ideal for solar projects!
|
Operating range: 1.5-3VDC, 350mA. No load rating: 14200 RPM @ 0.3A. Max. efficiency: 11780 RPM @ 1.33A. Torque: 15.7gcm. Stall torque: 1.60oz-in. Click "more info" for drawing.
New
356 in stock
GD912
|
Buhler 1.13.043.242.03 12VDC/3.5 ohms long-shaft motors. 3 M3 threaded mounting holes in front. 3" leads. Rated: 2300 RPM @ 12VDC NL, 4700 RPM @ 24VDC. 4mm dia. X 49mm steel front shaft. Front ball bearing, rear
sleeve bearing. Dimensions: L: 3-1/8" (Body) DIA: 1-9/16”.
Used
GE235
0riginally made to drive sliding track in electric automotive seats. Permanent magnet type motor. Dual flexible output shafts are 1/8" square. (Similar to speedometer cable). This motor would normally be mounted within the
seat frame. Brand new units - removed from equipment. 12 VDC2.5 amps (no load). 4400 RPM. Reversible. The motor is totally enclosed. Intermittent duty. 2 threaded mtg holes at one end of the motor body. 15" end/end on shafts. Motor body is
1-3/4" x 1-1/2" x 4-3/4". 2 lbs.
$29.45 Ea/10.
MF831
|
What a find - this 12vdc mini motors was originally designed for use in automotive mirror applications and door lock applications, but has thousands of other uses in hobby, micro-tool, RC and educational applications. No load speed
is a hefty 8200 - 11000rpm. Stalled torque is 3.75oz-in and stall torque is 5.0A. Click the "more info" icon for the full drawing and specs. Large quantity sales only, please.
New
$2.50 Ea/50, $2.25 Ea/100, $2.00 Ea/200, $1.75 Ea/400.
12803 in stock
TS458
|
12VDC stepper motor 32mA, good for such applications as office machines, automatic machines and split air conditioners. Specs:
- resistance: 280 ohms
- rated voltage: 12V DC
- current: 32mA
-
impedance: 380ohm
- phase: 4
- step angle / step: 5.625° / 64
- reduction ratio: 1/64
- detent torque: 4.86oz-in
- pull-in torque: 4.17oz-in
- max. starting pulse rate: 550pps
- max.
slewing pulse rate: 90pps
- temperature range: 77°F
- noise: 40dB
- cable: 420mm AWG 1095#28
- terminal: JST SPH-002T-P0.5S
- insulation strength: AC 600V - 1 sec cut-off current: 10mA
Click "more
info" for additional specs.
New
GD242
Johnson HC615-6506 permanent magnet motors. Voltage 13.6 DC, amperage 1.4 Amps, speed 4575 RPM, torque 3.5 in-oz. rotation reversible. Enclosure open, vented. Duty intermittent. Shaft 3.33 mm (0.131") dia. x 21/32",
knurled. Size: 1-15/32" O.D. x 2-11/32". Metal housing. Face mount accepts two M3 x 0.5 machine screws on 25 mm B.C.
New
GE222
Lunar model CR-505BS. 6-12 VDC, 0.8-4.5 amps - no load to max. efficiency. 18,000 rpm, reversible rotation, duty continuous. Designed for use in animated design. Shaft: 1/8" diam. x 7/16". Mount: 2 tapped
holes on face 1" c/c. Overall dimensions: 1-1/2" diam. x 2-1/2".
New
GF774
Dec 12-19267 REV.B.. Also Hitachi D04a191E. 3" long x 1.5" diameter. 1/8" diameter x 3/4" long shaft. 4 wire lead. only 1 left.
$29.85 Ea.
1 in stock
CX261
|
Ametek #116854-00 - Brand New - only 800 pcs available! Ref. Sensidyne P/N 401791.Specifications: No Load Speed: 4000-4800 RPM. No Load Current: 190 mA Maximum. Resistance Line to Line: 4.53 to 3.70 Ohm.
Torque Constant: 7.8 to 7.0 Oz in/Amp. Speed Constant: 150 to 140 RPM/Oz in. (for current draw less than .4 Amp. Click here for specs! Offers?
$75.00 Ea/50, $68.50 Ea/100, $62.00 Ea/200, $55.50 Ea/300.
TF519
|
Johnson motor, operates between 12 and 30 Vdc. 24 Vdc @ 50 mA, no-load rating. 0.94" diameter x 1.15" long. 2mm diameter x 7mm long shaft. Solder lug terminals.
$2.35 Ea/100.
MF839
Operates smoothly on 3-36VDC. 24VDC, 40 mA, no-load rating. 1.6" long x 0.91" x 0.71." 0.08" (2mm) diameter x 0.53" long shaft. Solder terminals. Please click picture to see a larger view.
$2.95 Ea/25.
MF858
Motor assembly with a 24VDC motor driving a COG belt & pulley that in turn drives worm & gear assembly. Steel frame, 5in. wire leads with ferrite filter. Approx. RPM @ 24VDC NL: motor: 3380, worm gear: 1650,
spur gear: 116. Bronze sleeve shaft & motor bearings and plastic gears with steel shafts. PC board on motor terminals with noise filters. Spur gear without a shaft that matches output spur gear included. Overall dimension: L:
3-1/2" O/A W: 3-1/2"O/A H: 3-1/2".
Used
GE246
|
25,000 available - brand new, in original factory packaging. Original typical OEM cost over $4.00 each. Ideal for: door locks, washer pumps, carburetor actuators, hair dryers, corn poppers, ventilation fans, etc. 8850rpm @
max power (3.29 amps and 18.7mNM torque). Full drawing available - click here! . This is an excellent opportunity for OEMs to get a great deal on a very versatile motor. Contact us today.
Sample available to qualified buyers. This unit is available for large volume sales only.
$1.95 Ea/10000.
4 in stock
BD009
|
26 VDC motor with brake. Reversible rotation. Energize 5 VDC brake to release. Specs: 26 VDC, 9000 RPM. Face Mount. Closed enclosure, continuous duty. 1/4" X 5/8" 13-Splined Shaft. Dimensions: 4" X
3-3/8" X 3-3/8".
Used
GE336
|
A close match to Mabuchi RK270 series both in size and current drain - this Nichibo RF-370CH-15370 unit feature a high torque figure of 186 gm-cm at stall. Hundred of applications - excellent for school science projects. Body is
24.4mm dia x 39mm lenght (including shaft). Shaft diameter is 2.0mm x 4.8mm. Operates on as low as 3 volts. Check the full spec sheet - click the "more info" icon
6348 in stock
TS840
|
|
Nichibo quality PC-280P-16200TB-NR runs on between 3 and 15vdc. Low profile , semi-flat design makes it ideal for use with solar projects (will run at about 1800rpm @3 volts) and will provide 9000rpm 12vdc/90ma (no load).
18 cx 24mm with serrated shaft 6.15mm dia x 13.5mm length. Ideal hobby - slot car motor. Consider this for your next production run. An ideal replacement for many FC280 motors by Mabuchi. Click the "more info" icon for full drawing and spec
sheets.
8458 in stock
TS839
|
|
Operating range: 2.5-6VDC, 340mA. 14500 RPM, 0.21A no load. 12530 RPM, 46.2gcm max. efficiency. Stall torque: 4.72oz-in. Click "more info" for drawing.
New
GD914
|
7,476pcs of Zhongshan E. M. & A Gen-115VDC 60 Hz 0.9A - 15W 1550 RPM CLA TPL 199 # E18093A available. These motors are equivalent to the Grainger exhaust motor #18, or the Fasco # D120. These units are the size of a
coffee mug and are counter clockwise rotation. The original FOB factory price is $23.95US per unit. Application for this motor seems to be mostly for bathroom exhaust fans. Offers considered for min. 2,000 lot.
DA066
We have an assortment of small Mabuchi DC motors that we wish to liquidate to make room for new purchases!
Sorry - no model number choice.
We ship whatever is easiest to ship quickly. All units are new, unused and will have
an operational range (depending on models shipped) from as low as 1.5 volts to as high as 24vdc (sorry no choice in what we ship - could be any voltage, any motor size, any shaft - long or short, etc)!
Excellent for DC motor theory, electrical
engineering courses, etc.
TS782
|
Bendix C57910 28VDC motor. Counter-clockwise rotation. 0.5 Amps, 9000 RPM, TE Enclosure. 1/4" X 1/4" 12-splined shaft. Dimensions: 2-1/2" X 1-1/2" X 1-3/4". Base mount (not incl).
Used
GE340
VON WEISE model V05366AB07 1/8 HP, 115VDC/1.4A electric motors. 148:1 ratio. Continuous duty. We have available approximately 60-75 motors. We also have 20 new pulleys with bushings available.
MG610
|
12VDC operation. Buehler model 16104615600. Heavy duty, 2.5" length, 1.3" diameter gearmotor features a semiflat shaft (approx 1/8" dia x 1/2" length) and bi-directional operation. At a load of 20Ncm, speed
is 106rpm and current drain is 650ma. Full drawing and specs - click the "more info" icon.
$29.95 Ea/3, $14.95 Ea/12, $11.95 Ea/24, $8.95 Ea/96.
437 in stock
TS198
|
|
12VDC 3600rpm (no load speed) top quality motor by Buehler. Model 11305707502. 1/8" shaft. Stall torque is 9Ncm and stall current is 3.3A. Click the more info icon for the complete drawing and spec sheet.
$9.95 Ea/5, $8.95 Ea/10, $6.95 Ea/25.
186 in stock
TS188
|
|
High performance Buehler model 16104615500 12VDC gearmotor. Draws only 650MA at a load of 7Ncm and operates at 330rpm. Shaft is 0.20" diam x 0.37" long semiflat. Can be used bi-directionally. No load speed is 490rpm. Click
the "more info" icon for full specs and drawing!
$29.95 Ea/3, $14.95 Ea/12, $11.95 Ea/24, $8.95 Ea/96.
334 in stock
TS197
|
|
12VDC - 30NCM TORQUE GEARMOTOR
|
Excellent for modellers, robotics, small electric vehicle experiments, etc. Great Buehler model 16104615700 12VDC gearmotor is 2.8" long x 1.4" diameter. Shaft is 0.20" semiflat x 0.5" length. Bi-directional
operation. At 12vdc, 390ma, speed is 42rpm and torque is 30Ncm. For full specs,. click the "more info" icon.
$39.95 Ea/2, $24.95 Ea/12, $17.95 Ea/24, $14.95 Ea/96.
1 in stock
TS199
|
High performance 1.5" long, 3/4" wide and 1" high motor features low current drain under load (0.3 Ncm and 4510 rpm). 1/2" long shaft. No load speed is 5800rpm with current drain of only 85ma. Click the
"more info" icon for full specs and drawing.
1 in stock
TS192
|
BIG - Hi-POWER - HI TORQUE!
|
Buehler 12VDC motor model 11307520400. Large, 3" diameter, 4.75" length - hi-torque (304Ncm stall torque) motor is ideal for a multitude of robotic and model applications. Originally intended for use in linear actuator
application. No load speed is 6000 rpm and stall current is 160A. Reversible. Click the more info icon for full specs and drawing. Click photo for larger image. The slotted output shaft is ¼" diameter x 5/8" long. The motor weighs 6
pounds. This is an exceptional motor. As a generator, it develops approx 2 volts per 1000 rpm.
$99.95 Ea, $79.95 Ea/2, $59.95 Ea/10, $49.95 Ea/50.
765 in stock
TS189
|
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. Bi-directional operation. This is a great motor
for modellers, robotics, science projects, etc. Full drawing and specs - click the "more info" icon.
$14.95 Ea/6, $12.95 Ea/12, $11.95 Ea/24, $9.95 Ea/96.
110 in stock
TS200
|
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. This is a great motor for modellers, robotics,
science projects, etc. Bi-directional operation. Full drawing and specs - click the "more info" icon.
$14.95 Ea/6, $12.95 Ea/12, $11.95 Ea/24, $9.95 Ea/96.
1190 in stock
TS201
Top quality Buehler motor originally dssigned for use by Xerox. Nominal volatge is 16vdc, but will run at much lower levels. Stall torque is 6.2Ncm. No load speed is 5800 and no load current is only 0.17A. Please click the more
info icon for the comple spec sheet and drawing.
$8.95 Ea/10, $7.95 Ea/25.
42 in stock
TS186
|
Exceptional, compact 24vdc motor is rated 9200rpm no load speed, and 3400rpm with a 0.70Ncm load. Stall current is 0.5A and stall torque is 1.2Ncm. Excellent for model applications where a multi-pack series group of 3.7 li-ion
cells is used. Shaft length is approx 0.5". Click the more info icon for the full spec sheet and drawings.
$4.95 Ea/10.
1 in stock
TS191
|
|
GEAR MOTOR WITH WORM REDUCTION
|
Originally manufactured for use by Xerox, this gear motor with worm reduction produces a shaft speed of 240 - 268rpm under load (54Ncm) with a current drain of only 1.285 A. Click the "more info" icon for full specs and
drawing.
$29.95 Ea/3, $24.95 Ea/10, $19.95 Ea/50.
186 in stock
TS193
|
Buhler brush-commutated DC motor. Quiet, smooth operation from 6-42Vdc. 1.9" diameter x 2.54" long. Nominal, no-load speed, 8000 RPM @ 30VDC. 6mm diameter shaft. Rear shaft is flatted, 0.6" long. Front is 0.85"
long and has a brass worm gear attached. 4" pigtail leads.
$18.85 Ea/5.
MF952
|
GREAT SCHOOL PROJECT KIT!
|
A complete set of parts (battery not included) and instructions to build a real live, working motor. An introduction to the workings of the DC electric motor. A creative experience that no junior experimentor will ever forget.
"Watch it come to life" A number of experiments are included in the instructions, which the teacher can use to get young minds thinking. Snaps together. No soldering required. Operates on one AA battery. Contains all you see here.
$22.85 Ea, $19.95 Ea/5, $17.45 Ea/25.
MG252
|
Canon EN35-T10121A reversible 6DC motor with 10 inch shielded power cable. Measures 1-5/16 inch Dia. X 1-3/8 inches L. Delivers 1135 RPM at 6 VDC/42mA, 2250RPM at 12 VDC/55mA, 2250 RPM at 18 VDC/ 64mA or
24VDC/75Ma at 4000 RPM. The shaft size: 3/8 inch X 1/8 inch Dia. Quiet running. POR
MF725
This motor is 1-5/16" dia x 1" high. The shaft has a dual belt drive 3/8" dia pulley. Other numbers also appearing on the motor are; CM32-02401 and 5YGF. Made in Japan. Removed from brand new automobile
cassette drive mechanisms.
$9.95 Ea/25.
MD894
TRW Globe motors, model 405A100. 6VDC, 0.2 amps, 5200 RPM. Ceramic, permanent magnet motor with metal housing and face mount two #6-32 tapped mounting holes. Torque: 1.5 in.-oz. Sleeve bearings, closed enclosure, reversible
rotation and continuous duty. Size: 1.275" diam. x 1-15/16" with 1/8" diam. x 3/8" long shaft. Face two holes on 1" centers mount.
New
GF878
Easy to assemble kit - Velleman # k8004. Ideal for accurate control of DC motors, lighting levels and small heaters as well as other applications. The cirtuit converts DC voltage into a series of pulses, the duration of which
is directly proportional to the voltage. Minimizes power loss in the control circuit. Overload and short circuit protection. Input Voltage: 2.5 -25 VCD. Maximum output 8-35 Vdc, 6.5 Amps.
$49.50 Ea.
MC432
Beuhler 24VDC dual shaft permanent magnet motor. 0.15 amps, 1/35 HP, 3450 RPM. Duty intermittent, reversible rotation, TENV enclosure. 3 holes in face mount. Dimensions: 1-9/16" dia. x 3-1/8" with
5/32" dia. x 7/16" and 5/32" dia x 3/4" w/flat shafts.
New
3 in stock
GG211
Escap precision Swiss-made, brushed DC motor. 16mm diameter x 15.7mm long. 1.5mm diameter x 6mm long shaft. 16000 RPM @ 15VDC, 6.9MA no-load measurements. Two M1.6 x 1.4 tapped mounting holes on 10mm centers. 5" pigtail
leads. Please click on image to see a larger view.
$19.85 Ea/10.
MF859
Fun with gears and motors. Small 3VDC motor, metal bracket and axles, and an assortment of small plastic gears and collars to produce a gear train of various ratios. Includes; 3VDC motor, metal shafts, spur gear, double spur
gear, face gear and pinion gear. Operates on 2 AA batteries (not included).
$14.95 Ea, $12.45 Ea/10.
ME689
SURPLUSTRADERS.NET can solve your problem!
SURPLUSTRADERS.NET now offers a superior sourcing service for use by corporate clients with major purchase (in excess of $50,000US) requirements. We do the leg-work for you, find a
viable vendor, then put you in direct contact with the vendor.
We operate on flat rate basis which takes into account the complexity and dollar value of the products you require.
This service is offered to our corporate clientele only and each
requirement is analyzed before a fee-for-service quote is rendered.
For more information, please contact:
Ted Duskes, 1-800-341-6468 (ted@surplustraders.net)
or
Marshall Duskes 1-866-266-7638 (marshall@surplustraders.net)
TS789
|
24VDC high speed 12,000 rpm. Overall length: 3-1/8". Overall width 1-3/8". Shaft length 5/8". Shaft dia 1/8"
$6.85 Ea/25.
MF726
5 VDC operation, model SM1230A (13,000 rpm @ 100ma - no load). Under load: torque is 8g.cm at 360ma (8800RM). Used originally in automatic cameras (probably used for film winding and telephoto zooming). Ultra compact - only
12mm diameter x 30mm length with approx shaft diameter of 1.5mm. Ideal for micro products, mini robotics, etc. Shipped FOB Korea warehouse.Also available:
30,000 pcs model SM1215C, zooming motor for camera
4800 pcs Mabuchi motor
RF-N60CA-05744A
$8.95 Ea/10.
12 in stock
TG339
|
|
Door Lock and Mirror Application Modifications!
|
Nichibo UC-280P-19160-N - Great for solar kits (use with our MF367, TH324 or TH325 solar cells). Also easily adaptable to door lock and mirror adjust mechanisms for many foreign cars. Serrated shaft facilitates easy mating to
shaft. Click the "more info" icon for the full spec sheet.
$0.89 Ea/200, $0.79 Ea/500, $0.59 Ea/1000.
4948 in stock
TS784
|
Johnson 12,000 RPM (no load), 6000 RPM full load 1.2 amps permanent magnet motor. 115 VDC, 0.13 amps (no load). CW rotation, continuous duty, open enclosure. 2-hole face mount. Dimensions: 2-1/2" x 1 1/4" x
1-1/2" with 5/32" diam. x 1/2" shaft.
New
GG174
Here is a tutorial that explains in simple "baby talk" how little DC electric motors work. Take a few minutes to read it over, and enjoy learning what makes them spin. A little knowledge goes a long way and can serve you
well if you work in the world of motors. Enjoy! 
MG043
|
13.6VDC Johnson tool motor w/bronze sleeve bearings. 6100+RPM, .44A, no load, @ 13.6V. MaxTorque:6.1oz/in @ 13.6V/2.8A. 1/8" Dia. X 3/4" serated steel shaft. Solder terminals. 2 mounting
holes threaded M3 on front. Dimensions: L: 2-5/8"(Body) Dia: 1-1/2".
New
GE212
6 VDC, 1.0 amp (no load) Johnson Electric motors, model 169324. RPM 8600, reversible rotation, duty intermittent, open enclosure. Shaft: 1/8" dia. x 3/8" long serrated. Mount: 2 hole face on 25mm c/c.
Overall dimensions: 1-3/8" dia. x 2-1/2".
New
GF776
13.6 VDC Johnson motors, p/n HC615-6605 (may also be marked as 9167AJ 65050 or 3H3461). Metal housing w/face mount that accepts two M3 x 0.5 machine screws on 25 mm B.C. Voltage 13.6 DC, rotation reversible, duty
intermittent, enclosure open, vented, shaft 3.33 mm (0.131") dia. x 21/32", knurled. Amperage 3.5 Amps, speed 6290 RPM, torque 6.15 in-oz. Size: 1-15/32" O.D. x 2-11/32".
New
GE220
Johnson 13.6 VDC permanent magnet motors, p/n HC615L. Amperage 2.8 Amps, speed 6100 RPM, rotation reversible, torque 6.1 in-oz. Enclosure Open, vented. Duty intermittent, shaft 3.33 mm (0.131") dia. x 21/32",
knurled. Overall size 1-15/32" O.D. x 2-5/8". Metal housing. Face mount accepts two M3 x 0.5 machine screws on 25 mm B.C.
New
GE221
Powerful little motor (also works as a generator) capable of running on 12VDC to 20 VDC. Size: 1-3/8" dia x 2-3/8" long. Dual 1/8" dia shafts extend 3/8" on one end and 1/2" on the other
end. Numbers 65780 and 364322 are stamped on the case. 3/16" male push on terminals at the rear of motor. The front has dual threaded holes on 1" centers. Bronze bearings. We have matching 20VDC/1.5A power supplies (MB678). When powered
with this power supply motor cannot be stalled by grasping the 1/8" dia. shaft.
$11.95 Ea/10.
177 in stock
MB679
|
Mabuchi # FF-N20PN. Miniature 1.5 to 3 Volt DC motor. Ideal for models and radio controlapplications where small size is important. No load rating: 15,800 RPM @ 2.4 V, 96 mA.Length (excluding shaft), 0.654” long x
0.47” x 0.39”. Shaft is 0.039”(1mm) diameter x 0.13” long. Solder-loop terminals.
$1.89 Ea/500, $2.19 Ea/250, $2.49 Ea/100, $3.57 Ea/50.
377 in stock
MC425
|
|
Mabuchi FC-130RF-VN054515. A truly unique mini motor with ultra small, flat shaft allows construction of ultra miniature projects. Flat shaft allows easy attachment of accessories, etc. Click on the "more info" icon to see
a detailed drawing - NOTE: shaft on units we are selling is much shorter than shown in the diagram... as per the photo on this web page. Designed for 12VDC operation in industrial heavy duty applications.
$0.09 Ea/1000, $0.08 Ea/2000, $0.07 Ea/3000, $0.06 Ea/5000.
2846 in stock
TS127
|
|
We have just acquired a large quantity of 12VDC Mabuchi FC-130SM-17909A 1" x 0.6" semi flat motor with 2.0mm (.08") diameter 1.5mm (1/16") long flatted shaft. We do not have the full specs on this motor, but
check the spec sheet on similar models (different voltage) by clicking on the "more info" icon. Photo on spec sheet shows long shaft - these units have a 1/16" long shaft - making them ideal for ultra-compact rc and science fair projects.
This unit features 3 pole construction, carbon brushes, anisotropic magnets and low noise construction. Coil is 179 turns of 9mm dia wire. Originally used in automotive applications. Note: photoabove - not exactly same as units offered for sale.
$3.95 Ea, $2.25 Ea/100, $2.00 Ea/500, $1.85 Ea/1000.
498 in stock
TS026
|
We have just acquired a large quantity of 12VDC Mabuchi FC-130SM-17909A 1" x 0.6" semi flat motor with 2.0mm (.08") diameter 1.5mm (1/16") long flatted shaft. We do not have the full specs on this motor, but
check the spec sheet on similar models (different voltage) by clicking on the "more info" icon. Photo on spec sheet shows long shaft - these units have a 1/16" long shaft - making them ideal for ultra-compact rc and science fair projects.
This unit features 3 pole construction, carbon brushes, anisotropic magnets and low noise construction. Coil is 179 turns of 9mm dia wire. Originally used in automotive applications.
498 in stock
TS719
|
|
Popular for Automotive Use!
|
MABUCHI DC MOTOR. The motor measures 1-1/4"L x 7/8"W x 3/4"H. The serrated shaft is 3/8" long. We have no other spec. We believe that is a common motor model found in many different automotive
applications such as mirror adjust, door lock, and other remote operated devices. No sure of specific applications!
New
$24.95 Ea/4, $19.95 Ea/10, $15.00 Ea/50.
373 in stock
TS519
|
|
|
MABUCHI DC MOTOR. Numbers appearing on this motor are FC-280pt-20150. The motor measures 1-1/4"L x 7/8"W x 3/4"H. The serrated shaft is 3/8" long. We have no other spec. This motor was made for Ford.
Made in Vietnam. Note: spec sheet shows different physical layout.. photo is correct.
New
$24.95 Ea/4, $19.95 Ea/10, $17.95 Ea/25.
373 in stock
MF586
|
|
Great 12vdc Utility Motor!
|
MABUCHI FK-280PA Diameter 18.3mm x 24.2mm - length 30.5mm. 6 - 15VDC (12VDC nominal). 15mm shaft. No load speed 12,000 RPM.
2 in stock
TS882
|
|
Great 12vdc Utility Motor!
|
MABUCHI FK-280PM-10887A. Diameter 18.3mm x 24.2mm - length 30.5mm. 6 - 15VDC (12VDC nominal). 15mm shaft. No load speed 8,000RPM @ 0.07A.
$1.45 Ea/500, $1.15 Ea/2500, $1.05 Ea/10000.
569 in stock
TG691
|
|
We have just acquired a small quantity of Mabuchi RC-260RA 1" dia (23.8mm) x 1.05" (26.9mm) motor with 2.0mm (0.08") diameter, 10mm (3/8") long shaft. We do know that this unit features carbon brushes, 3 pole
construction, segmented isotropic magnets and has coil specs of 255 turns of 25mm dia wire. Originally used in automotive applications.
$2.25 Ea/100, $2.00 Ea/500, $1.85 Ea/1000.
85 in stock
TS024
|
|
IDEAL SOLAR POWERED MOTOR!
|
Mabuchi RE-260RA-00638. With 3-3/4" wire leads! We were lucky enough to locate a sizeable inventory of this tremendously popular mini motor. Can be used as slot car power center, reversed as a generator, or as a great
example of power to motion conversion!
Runs on as low as 1.5 volts - making it ideal for use with low voltage projects and solar cell demonstrations ( ideal for use with our MF367 Solar Cell - Click Here for details on the cells!Special pricing for schools and kit packagers if cells and motors purchased together!
New
4233 in stock
TS827
|
|
USE AS A GENERATOR, TOO! OVER 90,000 IN STOCK!
|
MABUCHI model RS-555PH-3255 (RS555PH3255). What a find.... Originally designed to be installed in portable drills and printers. (Also works as a fine generator) This model features improved design to reduce external noise levels.
Has "wrap around" magnetic shield. High torque 380.3 gm-cm with a stall-torque figure of 1360 gm-cm. An excellent find for the small or medium sized OEM who requires modest quantities of this quality product but cannot satisfy the
manufacturer's demand for large quantity purchases. Hundreds of application in Robotics, the RC field etc. (shaft is 1/4 flat - stainless steel 1/8" dia). No load speed is 5500RPM - excellent for "gearing down" to provide ultra
high torque for larger projects. 1-7/16" dia x 2-5/8" long. Flatted shaft is 1/2" long. 3/16" push on terminals. Check the spec sheet by clicking the "more info" icon. For a larger photo, click on the photo above.
This unit features 5 pole construction for higher torque and power efficiency, anisotropic magnets, and coil specs of 55 turns of 32mm wire. We have tested this motor on one alkaline pencell and find that it will deliver useable torque at reduced RPM.
Superb for school projects.
ATTENTION: IMPORTERS / EXPORTERS -
Call Ted Duskes at 800-341-6468 (514-739-8723) to negotiate large quantity pricing on this high quality, high power motor. (If you can use the entire lot - call Ted at
514-739-8723 for a very special deal)
$3.59 Ea/30, $3.09 Ea/50, $2.59 Ea/200, $2.09 Ea/600.
68067 in stock
MD522
|
This Mamco model CP-12-132 12VDC, 4400 RPM (no load) motor is designed to fit into a 4.3" diameter opening with an o-ring groove in the edge of front mounting flange. Shaft partially recessed in flange and extends 5/8"
from face. 2.5 amp @ no load, 45 in.oz. at 3600 RPM 15 amps torque. Reversible rotation, duty continuous, TENV enclosure. Bronze sleeve bearings. Dimensions: 4.33" diameter x 4-3/4" with 5/16" dia. x 1" w/threaded end
shaft.
New
GF915
List of various motors by such manufacturers as Baldor, Johnson, Dayton and more, gearboxes by Bonfiglioli and Biesse, and a small assortment of starters and blowers. Selling as a complete lot, reasonable offers accepted. Click
"more info" for pdf of complete list.
GF798
N60GA6617. This DC motor is a bit of a mystery. All we know about it is the PART number. 1-1/8" long x 1/2" dia. The needle shaft in 1/4" long. Seems nice quality.
$2.95 Ea/10.
9 in stock
MF573
|
3/4" DIAMETER x 1-5/8" LONG
|
This motor will operate on 3 to 6VDC. 3/4" diameter x 1-5/8" long (includes shaft). The shaft alone in 3/8" long x 1/16" in diameter. The face of the motor has two tapped screw holes (1/2"
apart) for mounting. A fine quality little motor.
$0.99 Ea/120, $0.89 Ea/300, $0.79 Ea/600, $0.59 Ea/1200.
15106 in stock
TS610
|
New Permco 2809-841-034 12 VDC 3200 RPM dual shaft permanent magnet motors with brushes. Smooth shafts w/no keyways or flats. Voltage 12 VDC, amps 2.5 @ no load, RPM 3,200 no load, rotation reversible. Open enclosure,
shafts 5/16" dia. x 2" long, smooth. Overall size 3-1/4" dia. x 4-5/8".
New
GE218
|
PITTMAN 8322-F398 24vdc motorwith push on terminals. 1.175" dia x 2.0" Length (not inclduing .1564" dia x .562" L shaft. Spec sheet (click the "more info" icon) shows drawing but specs are for a different
model.
$42.55 Ea/3, $37.85 Ea/6, $32.45 Ea/12.
TS542
|
Protech 1/7 HP, 12VDC permanent magnet motor, model 1-030-011. High torque output. Specs: Amperage 13.1 Amps. Speed 3785 rpm. Rotation Reversible. Enclosure TENV. Duty Intermittent. Mount 2 10/32 studs on face,
2-1/2" B.C. Shaft 5/16" x 1-1/8". Torque: 40oz-in. Overall size 3" dia. x 4".
New
GE282
Johnson Electric model 64823 12/24 VDC permanent magnet motor. 0.2 amps, 4700/10000rpm, reversible rotation, duty intermittent. Open enclosure. Shaft: 1/8" dia x 1/2" L. Mount: 2 bolt face on 25mm
c/c. Overall dimensions: 1.4" dia. x 2-1/4".
New
GF773
Leeson model 46282512P1 28 VDC permanent magnet motor is great for use in pumps and blowers and will run at a reduced speed @ 24 VDC. 1/25 HP, 1.8 amps, 4200 RPM. Reversible rotation, continuous duty. Dimensions:
2-3/8" diam. x 4-5/8" with 5/16" diam. x 1-1/2" shaft and 1-1/4" sq. mount face.
New
GF831
RP2020 1.6 RPM, 12VDC inline gearmotors. Ideal replacement corn pellet stove, auger motor. Aluminum gear housing. Six 10-32 bolt hole face mount on 1-15/16" - 4-3/8" x 2-3/8" centers. Amperage 350 mA, torque
78 in - lbs., rotation reversible. Duty continuous, enclosure open. Shaft 3/8" diam. x 1" w/flat. Overall size 3-3/4" x 2-3/4" x 4-3/4".
New
GE225
6-36 VDC motors by SEI, model 555S-2580 with reversible rotation and 3.90 in-oz. torque. 19.7 watts, 1.4 amps. Speed: 7970 RPM at no load, 6800 RPM rated. Open enclosure, duty intermittent. Shaft: 3.175 mm x 18.5 mm long
w/flat. Face Mount: two bolts on 25 m m centers. Size: 35.8 mm O.D. x 61.5 mm L.
New
GF775
|
START YOUR OWN BUSINESS ON THIS PAGE
|
Yes - we can help you start your own AC & DC electric motor, parts & equipment business. You can start your business on this very page and get customer inquiries that will lead to solid sales. Get started today. For further
information please call Ted at 514-739-8723.
MF715
|
|
Super high quality 29mm dia x 52.6 length motor runs on 24vdc and delivers 1.6oz-in torque. 5420 RPM under load (1.8 amp stall current)- no load speed 7710rpm and only 120ma draw. Complete drawing and spec sheet - click the
"more info" icon. Shaft is 14.3mm L x 3.9mm dia. Leads are 22awg. Units may show signs of storage, but are unused.
New
$49.80 Ea/3, $44.50 Ea/6, $39.80 Ea/18.
TS541
|
Superior Electric SLO-SYN DC Step Motors are brushless, permanent magnet motors that are easily adapted to different types of control. Over 60 available.
New/as-is
VA283
Surplus Traders has this inventory in stock!
Product will be shipped from our warehouse in NY state. Please allow for list to be fully downloaded. Use CTL + F to locate the product you are searching for. In the event you
cannot locate your requirement, please contact Ted Duskes at 514-739-8723 - we may have other viable alternatives.
WA940
Surplus Traders has available the following inventory IN STOCK! Product will be shipped from our warehouse in NY state. Please allow for list to be fully down-loaded. Use CTL + F to locate the product you are searching for. In
the event you cannot locate your requirement, please contact Ted Duskes at 514-739-8723 - we may have other viable alternatives.
TS291
WE CALL IT BY DIFFERENT NAMES... Earthquake Machine, Grand-Daddy Vibrator, and more... This is a unique product from Surplus Traders.
Basic motor is 1.4 inches in diameter and runs on voltages from as low as 4 volts to as high
as 14 volts. Low current consumption: 200ma@5VDC, 1000ma @ 7VDC, 2.0A @ 10VDC and 2.2A @ 12VDC. Maximum speed is approx 5000 RPM, but operation at this speed, with this weight, is not recommended.
Can be used to vibrate:
containers, fluids, wall, beds, chairs, deer feeders, etc.
Ideal as a signalling device for the hard of hearing, as well, when attached to furniture, doors or walls. We have had many, many requests for a motor of this size and power and now have it
available. Order being taken now for future delivery. NOTE: due to the vibration magnitude, this motor is NOT recommended for "personal" devices unless the motor and weight are fully and securely encased. Contact Ted Duskes at 1 800 341 6468
or Ted to reserve your stock now and negotiate large quantity pricing!
Are your prototyping a new product? 3 sample units - $100 shipping included (to new product developers only!
Click the "more
info" icon for a different view.NOTE: it is recommended that this motor always be used in an enclosed (preferably ventilated) housing to prevent injury as the rotating weight has high destructive force capability.
$29.90 Ea/12, $27.90 Ea/24, $25.90 Ea/48, $21.00 Ea/96.
259 in stock
TS770
|
|
Operates on 1.3VDC@80MA. 7/8" x 3/8" x 1/4". Used in pagers, cell phones and vibrating batteries. 1-1/2" leads with mini 2 pin connector.
$4.45 Ea/25, $3.45 Ea/100, $3.25 Ea/500, $2.95 Ea/1000.
MC099
|
What you see is what you get. Two DC motors mounted side by side on a neat mounting bracket. Each motor is 1.5" dia. x 1.25" high and each has a 1/16" shaft with a pulley secured by set screws. Our guess is that
they powered a 12VDC automobile tape player. 10,000 available.
$9.80 Ea/5, $5.60 Ea/25, $4.65 Ea/100.
1 in stock
SA080
We have been offered the following brand new motors; HURST: 3 each of (PCDA) 990535, 2 each of (PC) 990525, 2 each of (PCDA) 990513, MAXON: 3 each of 118783. I am accepting offers for this lot. Ted 514-739-8723
ME573
|
