NEW CONTACT PHONE NUMBERS
TS632
|
Click HERE to see our NEW 144 page catalog! CALL NOW TOLL FREE - 1 800 341 6468.
SA596
|
12VDC 3600rpm (no load speed) top quality motor by Buehler. Model 11305707502. 1/8" shaft. Stall torque is 9Ncm and stall current is 3.3A. Click the more info icon for the complete drawing and spec sheet.
$9.95 Ea/5, $8.95 Ea/10, $6.95 Ea/25.
293 in stock
TS188
|
|
BIG - Hi-POWER - HI TORQUE!
|
Buehler 12VDC motor model 11307520400. Large, 3" diameter, 4.75" length - hi-torque (304Ncm stall torque) motor is ideal for a multitude of robotic and model applications. Originally intended for use in linear actuator
application. No load speed is 6000 rpm and stall current is 160A. Reversible. Click the more info icon for full specs and drawing. Click photo for larger image. The slotted output shaft is ¼" diameter x 5/8" long. The motor weighs 6
pounds. This is an exceptional motor. As a generator, it develops approx 2 volts per 1000 rpm.
$69.95 Ea, $59.95 Ea/10, $49.95 Ea/50, $39.95 Ea/100.
886 in stock
TS189
|
Buehler fine-quality, ball bearing motor. Operates smoothly on 3VDC to 24 VDC. 80mm long x 40mm diameter. 4mm diameter shaft is 49mm long. Test data: 3VDC/122mA=495 RPM. 12VDC/144mA = 2289 RPM. 24VDC/166mA
= 4702 RPM. Torque 5.8 oz-in/Amp 41mNm/Amp. Resistance 3.5 Ohms. Used, removed from working equipment. Includes connector with 6" lead wires.
Used
$18.90 Ea/5.
MF954
Top quality Buehler motor originally dssigned for use by Xerox. Nominal volatge is 16vdc, but will run at much lower levels. Stall torque is 6.2Ncm. No load speed is 5800 and no load current is only 0.17A. Please click the more
info icon for the comple spec sheet and drawing.
$8.95 Ea/10, $7.95 Ea/25.
45 in stock
TS186
Compact 12vdc motors has no load speed of 9200 rpm and a load speed of 3400rpm (with 0.7Ncm load). Stall torque is 1.2Ncm and stall current is 1.1A. Exceptional motor for compact model appliocation where a low current motor is
needed. Overall length is just under 1". Complete specs - please click the "more info" icon.
$5.95 Ea/10, $4.95 Ea/25, $3.95 Ea/100.
249 in stock
TS190
Exceptional, compact 24vdc motor is rated 9200rpm no load speed, and 3400rpm with a 0.70Ncm load. Stall current is 0.5A and stall torque is 1.2Ncm. Excellent for model applications where a multi-pack series group of 3.7 li-ion
cells is used. Shaft length is approx 0.5". Click the more info icon for the full spec sheet and drawings.
$4.95 Ea/10.
33 in stock
TS191
|
|
High performance 1.5" long, 3/4" wide and 1" high motor features low current drain under load (0.3 Ncm and 4510 rpm). 1/2" long shaft. No load speed is 5800rpm with current drain of only 85ma. Click the
"more info" icon for full specs and drawing.
$3.95 Ea/10, $3.50 9/25, $2.99 Ea/100.
237 in stock
TS192
|
GEAR MOTOR WITH WORM REDUCTION
|
Originally manufactured for use by Xerox, this gear motor with worm reduction produces a shaft speed of 240 - 268rpm under load (54Ncm) with a current drain of only 1.285 A. Click the "more info" icon for full specs and
drawing.
$29.95 Ea, $24.95 Ea/10, $19.95 Ea/50.
233 in stock
TS193
|
Designed to meet exacting Xerox standards, this Buehler beauty is a powerhouse... produces 80Ncm torque with only 0.68 - 0.83A draw at 77 - 94Rpm - or 114-133rpm @ 20Ncm torque with only 0.195 - 0.290A draw. Can be used
bi-directionally. Full drawing and specs available - click the "more info" icon.
$49.95 Ea/2, $39.95 Ea/5.
12 in stock
TS194
|
25VDC operation. Produced originally for use by Xerox, this 2.7" (overall length) gearmotor features a semi-flat shaft for ease of adaptation to your specific requirments. 80rpm no load speed with only 140ma current draw. At
31Ncm, speed is 74rpm and drain is a low 500ma. Click the "more info" icon for full specs and drawing.
$29.95 Ea, $24.95 Ea/5.
33 in stock
TS195
24VDC gearmotor is 2.7" long (not including shaft, which is .9" long or gearhead 0.75"). Gear ratio is 30:1. Bi-directional operation. At 50Ncm torque, speed is 180rpm and current drain 830ma. Full specs and drawing
available - click the "more info" icon.
$25.95 Ea, $19.95 Ea/5.
19 in stock
TS196
|
High performance Buehler model 16104615500 12VDC gearmotor. Draws only 650MA at a load of 7Ncm and operates at 330rpm. Shaft is 0.20" diam x 0.37" long semiflat. Can be used bi-directionally. No load speed is 490rpm. Click
the "more info" icon for full specs and drawing!
$29.95 Ea, $19.95 Ea/5, $17.95 Ea/10, $16.95 Ea/20.
348 in stock
TS197
|
12VDC operation. Buehler model 16104615600. Heavy duty, 2.5" length, 1.3" diameter gearmotor features a semiflat shaft (approx 1/8" dia x 1/2" length) and bi-directional operation. At a load of 20Ncm, speed
is 106rpm and current drain is 650ma. Full drawing and specs - click the "more info" icon.
$19.95 Ea/5, $17.95 Ea/10, $16.95 Ea/25, $12.95 Ea/100.
541 in stock
TS198
|
|
|
12VDC - 30NCM TORQUE GEARMOTOR
|
Excellent for modellers, robotics, small electric vehicle experiments, etc. Great Buehler model 16104615700 12VDC gearmotor is 2.8" long x 1.4" diameter. Shaft is 0.20" semiflat x 0.5" length. Bi-directional
operation. At 12vdc, 390ma, speed is 42rpm and torque is 30Ncm. For full specs,. click the "more info" icon.
$29.95 Ea, $17.95 Ea/10, $15.95 Ea/25, $12.95 Ea/100.
501 in stock
TS199
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. Bi-directional operation. This is a great motor
for modellers, robotics, science projects, etc. Full drawing and specs - click the "more info" icon.
$14.95 Ea, $12.95 Ea/10, $11.95 Ea/25, $9.95 Ea/100.
434 in stock
TS200
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. This is a great motor for modellers, robotics,
science projects, etc. Bi-directional operation. Full drawing and specs - click the "more info" icon.
$14.95 Ea, $12.95 Ea/10, $11.95 Ea/25, $9.95 Ea/100.
1214 in stock
TS201
|