Click the graphic to visit ONLYBATTERIES.COM
TS795
This list contains a wide selection of circuit breakers, magnetic flow meters, solenoids, switches and much more. May be subject to a minimum order requirement. Click MORE INFO to view the list in it's entirety.
New
VA437
115VAC garage door opener gearmotors. These are new take-offs, removed from unused Stanley garage door openers and consist of rt-angle gearmotor mounted on metal base plate. 115 VAC, 4.5 amps, 110 RPM. 15:1 gear ration,
rotation reversible, duty intermittent. Open enclosure. Dimensions: 10-1/8" x 9-1/2" x 6-1/2" with 8T sprocket shaft. Output shaft: 8 tooth, 1.50" O.D., 0.11" thick sprocket with tooth spacing for 41 pitch roller
chain and protrudes from the bottom of the assembly. 44" long 3-prong power cord.
New
GG173
SURPLUSTRADERS.NET can solve your problem!
SURPLUSTRADERS.NET now offers a superior sourcing service for use by corporate clients with major purchase (in excess of $50,000US) requirements. We do the leg-work for you, find a
viable vendor, then put you in direct contact with the vendor.
We operate on flat rate basis which takes into account the complexity and dollar value of the products you require.
This service is offered to our corporate clientele only and each
requirement is analyzed before a fee-for-service quote is rendered.
For more information, please contact:
Ted Duskes, 1-800-341-6468 (ted@surplustraders.net)
or
Marshall Duskes 1-866-266-7638 (marshall@surplustraders.net)
TS789
|
115 VAC 110 RPM gearmotors are great for operating timers, display animation, valves and more. 0.1 amp, reversible rotation, continuous duty. Capacitor start/run. Dimensions: 4" x 3 1/2" x 2 1/4" with
1/4" dia. shaft.
New
GG064
115 VAC right-angle gearmotor assemblies from unused garage door openers. 4.5 Amps, 73 RPM, gear ratio: 22.6:1, reversible rotation, duty intermittent. Open enclosure. Mounted on a metal base plate with 10 tooth, 1.75"
outer dia. output shaft protruding from bottom. Shaft has 0.11" thick sprocket w/tooth spacing for 41 pitch roller chain. Overall dimensions: 12" x 12-1/2" x 6-1/2", with 42" three prong power cord.
New/pulled
GG063
AXIOHM Thermal/Impact Ptr W/2 Color, USB/RS232, MICR, Knife Model A760-2215
Refurbished
WB797
115VAC, 1.48 amp gearmotor. 118 RPM, CW rotation, duty intermittent. Open enclosure. Overall size: 3-1/4" x 2-3/4" x 4" with 1/4" diam. x 15/16" w/ 3/32" diam. x 1-1/8"
cross pin shaft. Mount: 4 bolt face 1-5/8" x 1-9/16". Tapped mounting holes #8-32.
New
GF877
315 RPM, 1/50 HP gearmotors by Japan Servo with 12.5 mfd capacitors included. 115 VAC, 1 amp, 15 watts. Reversible rotation, ratio 1:4.66. Duty: 0.05 Sec. ON, 10 Sec. OFF, Torque 4 in.-lb. Dimensions: 2-7/8"
x 2-7/8" x 3-7/8" with 4 bolt 2 1/2" x 2 3/8" ctrs. mount.
New
GF804
120VAC inline parallel shaft Brevel gearmotors. 80 RPM, 2 amps, CW rotation, duty intermittent. Shaft: 3/8" diam. x 3/4" w/ flat. 4 hole face mount 1-9/16" x 1-1/4" centers. Overall
dimensions: 3-1/8" x 2-1/2" x 4-3/8".
New
GF767
Tung Ning Electrical Co. shaded pole inline gearmotors. Rear shaft - 2880 RPM, 0.2" dia. x 3/4" L. 120VAC, 0.5 amps @ no load, 64 RPM. Gear ratio: 45:1, rotation: CW. Duty int. Three bolt face mount.
Shaft: 1/4" dia. x 9/16" w/0.1" dia. thru-hole. Overall dimensions: 3-1/2" x 2-1/2" x 3-3/4".
New
GF699
|
Surplus Dynetic Systems 220028D motors and gearhead assemblies for use with Baxter Travenol peristaltic blood pumps. Specifications: 36V 3.5A generator volt graduation 14.0 DCV/KRPM. 13 available.
New/as-is
VA282
These inline gearmotors are an ideal auger motor replacement for corn pellet stoves. 120 VAC, counterclockwise rotation, duty intermittent. Open enclosure, face mount. Six 10-32 bolt hole face mount on 1-15/16" -
4-5/16" x 2-3/8" centers. Aluminum gear housing.
| Part No. | Amperage | Speed | Torque | | GE767 | 0.59 amps | 2 RPM | 121 in-lbs. |
New
GE766
|
Molon model LIM-30146-3 135 RPM inline gearmotor, external 1.25 mFd, 440 VAC run capacitor included. 115 VAC, 0.1 amps. Reversible rotation, duty intermittant. Torque: 58 in oz. approx, gear ratio 2:1. Mount: two 4mm
tapped holes on face, 2-11/16" c/c. Shaft: 1/4" dia. x 3/8" w/ flat, overall size: Size 1-7/8" x 2-3/8" x 2-3/8".
New
GE755
74 RPM, 120 VAC shaded pole gearmotor by ECM, model 34 3406 000 1.8 amps. Tapped mounting holes #8-32, shaft extends from opposite side of mounting holes. Clockwise rotation, duty intermittent, open enclosure. Mount: four
bolt on 1-5/8" x 1-9/16". Overall size: 2-3/4" x 2-3/4" x 5-1/2". Shaft: 1/4" diam. x 17/32" w/ 3/32".
New
GE752
Bodine Electric inline gearmotor includes run & start capacitors. Requires relay (not incl.) for start capacitor. Voltage: 115 AC, amperage: 9.9 Amps, power: 440 Watts, torque: 44 in - lbs. Continuous duty, CW
rotation, open enclosure. Overall size: 5-1/2" x 10-1/2" x 5-1/2". Shaft: 16MM x 3-1/2" w/keyway. Mount: face 3-5/8" x 3-5/8".
Used
GE712
115 VAC shaded pole gearmotors by Rex Engineering. 220 RPM, 0.43 amps, clockwise rotation. Shaft: 1/4" diam. x 1/2". Overall dimensions: 3-1/8" x 3"x 3-1/8".
New
GE710
Merkle-Korff 3715UP-250 120VAC compact gearmotors. Speed: 15 RPM, voltage: 115 AC, amperage: 2.7 Amps, power: 97 Watts @ idle. Thermally protected, shaded pole motor. Rotation CW, duty Intermittent (1 minute max
on time). Face Mount 3 untapped bosses. Metal gear housing. Shaft: threaded end 5/16"-18 LH; base end 3/8" dia. x 3/8" long; overall length 15/16". Dimensions: 3-3/8" x 2-1/2" x 4".
New
GE342
120VAC gearmotors by ECI, model 50KTYZ-1. Silent operation, metal housing. Specs: Speed 6 RPM, voltage 115 AC, amperage 55 mA, power 6 Watts. Enclosure: totally enclosed. Rotation CCW, duty continuous. Mount 4 bolts on
2-7/32" B.C. Shaft 7 mm dia. x 3/8" w/ flat& snap-ring groove. Dimensions: 2-1/2" x 2-7/16" x 1-3/8". Capacitor included, operates at 5 RPM on 50 Hz.
New
GE307
43 x Dayton 6Z404 Parallel Shaft AC Gearmotors for sale. Motors are used and in good working condition. These motors deliver 18 RPM, Input Power 1/3 HP, Gear Ratio 95:1, Voltage @ 60 Hz 208-230/460. Shaft:
3-3/4" x 1-1/2". Weight: 27 pounds.
SA933
|
30 RPM 115VAC (.03A) gearmotor. New factory surplus. gearmotor. Motor typically rotates CW, by design it will sometimes rotate CCW. Rotation varies. Constant duty. Shaft 5/32" square, 1/4" long. Four bolt mount on
2-1/4" B.C. Overall size 2" dia. x 7/8" long. 1,500 available.
$12.85 Ea, $10.45 Ea/10.
MG453
115VAC/60Hz synchronus timing motor. For timing window displays experimental purposes and animation. Continuous duty. 3/4 RPM (45 RPH). CCW Rotation. Shaft 0.217" dia. 10 tooth gear. 2 hole mount on 1-7/8"
centers. Size 2-3/8" x 2" x 1-3/8". New factory surplus. 1,500 available.
$9.95 Ea/15, $8.45 Ea/20.
MG452
Consists of a 5 RPM gearmotor and a microswitch mounted on a steel bracket. Fiberboard cam on gearmotor shaft actuates microswitch to turn light bulb socket on or off. 8" long steel arm attached to cam provides reciprocating
motion. 8 foot, two prong power cord with on/off switch. Removed from new equipment. New takeoffs. Consists of a 5 RPM gearmotor and a microswitch mounted on a steel bracket. Fiberboard cam on gearmotor shaft actuates microswitch to turn light bulb
socket on or off. 8" long steel arm attached to cam provides reciprocating motion. 8 foot, two prong power cord with on/off switch. 1/8" dia. x 1/2" shaft w/flat. CW rotation. SPDT microswitch rated to 10 Amps. 6-1/2" x
1-3/4" x 2-3/4". Weight 1Lb.
$14.95 Ea, $12.45 Ea/5, $2.95 Ea/25.
MG443
Reversible miniature Haydon gearhead motor. Delivers 3.6 RPM at 20VAC. 0.125" diameter. The shaft is 0.30" long. The motor is 1.07" diameter x 1.23" long. Four 6" leads. Two leads for each direction.
$19.95 Ea, $17.95 Ea/5.
MG413
We have been offered the following brand new motors; HURST: 3 each of (PCDA) 990535, 2 each of (PC) 990525, 2 each of (PCDA) 990513, MAXON: 3 each of 118783. I am accepting offers for this lot. Ted 514-739-8723
ME573
26 RPM 45 VAC GEARMOTOR. Removed from service. Inline parallel shaft gearmotor. Mounting holes are drilled and tapped. Specifications; RPM 26, Voltage 45 VAC, Amps 0.600 (no load), Rotation CW, Duty Int. 4 hole face mount on
1-9/16" x 1-5/8" centers.Shaft 3/16" diam. x 5-1/4" w/ 10-32 threaded end. Overall Size 1-1/4" x 2-1/2" x 4-7/8"weighs 2 lbs.
$9.85 Ea/10.
ME046
Powerful shaded pole 30 RPM gearmotor. Intermittent duty cycle. Thermally protected. Runs for approximately 2 minutes before shutdown. 115 Vac, 60 Hz. Idle Amps, 3.8. CCW rotation, facing shaft. 3/8" diameter x 1.1"
long shaft. End 0.5" portion of shaft has 5/16" diameter thread. Gearbox is 4" x 2.87" x 0.58" thick with three mounting holes. Motor extends 3" behind gearbox. 0.25" qc/ solder terminals. UL.
$29.00 Ea/5.
MD985
Compact yet powerful reversible gearmotor made by MERKL KORFF. 52.5% duty cycle. Use on displays, rotisseries, mixers, etc. 2.5 mfd capacitor required (not supplied). specs; 175 RPM, 115 volt AC, 22 inch oz. torque, Shaft
5/16" dia x 1 1/2" w/flat, Size 3 3/4" x 2 1/2" x 3 1/2". Removed from used equipment. Weighs 4 lbs. 388 more available.
$18.25 Ea/5.
15 in stock
MD726
|
