Sign up for the Surplustraders.net Newsletter

STEPPER MOTORS - FOR SALE RSS Feed icon

(Click here To view  STEPPER MOTORS - WANTED)
Updated: February 7, 2012
PLEASE SCROLL DOWN FOR PAGE CONTENT
Category: 0083
Previous Category Page
Our Online Catalog consists of over 2000 pages geared to large quantity buyers and sellers
Use the "previous" and "next" icons to browse our catalog or
Click here to consult our MAIN INDEX
12VDC STEPPER MOTORS
STEPPER MOTOR
12VDC stepper motor 32mA, good for such applications as office machines, automatic machines and split air conditioners. Specs:
- resistance: 280 ohms
- rated voltage: 12V DC
- current: 32mA
- impedance: 380ohm
- phase: 4
- step angle / step: 5.625° / 64
- reduction ratio: 1/64
- detent torque: 4.86oz-in
- pull-in torque: 4.17oz-in
- max. starting pulse rate: 550pps
- max. slewing pulse rate: 90pps
- temperature range: 77°F
- noise: 40dB
- cable: 420mm AWG 1095#28
- terminal: JST SPH-002T-P0.5S
- insulation strength: AC 600V - 1 sec cut-off current: 10mA
Click "more info" for additional specs. New GD242  Contact Ted, the specialist for this product  Send an Inquiry 
Link to more info about this item
115 VAC TIMER BY EATON CONTROLS
EATON CONTROLS 366-101-30 MOTORIZED TIMER
Eaton Controls model 366-101-30 zero-ten minute motor-driven timing switch. 115 VAC, 3 watts, 1/11.25 RPM, CCW. Contacts rated 5 amps @ 120 VAC, 1/4" spade terminals. Panel mount in 3/8" hole. New GE203  Contact Ted, the specialist for this product  Send an Inquiry 
1.8 DEG. STEPPER MOTORS
MINEBEA 23KM-K102-P1V STEPPER MOTOR
1.8 degree. stepper motors. Coil: 3A/1ohm/2.2mH. Type: 2 Phase Bi-Polar 4 lead. 8mm dia. X 18mm steel shaft with a pressfit 13/16” dia. 18 tooth, aluminum cog belt gear. Ball bearings, 6pin connector Mating cable supplied, 4 corner mounting holes threaded M4.5. Dimension: L: 2-5/8"(Body) SQ: 2-3/16". New GE213  Contact Ted, the specialist for this product  Send an Inquiry 
1.8 DEG. 3V STEPMOTORS
SHINANO KENSHI STP-58D4002-03 STEPPER MOTOR
1.8 degree 3V stepper motor. Coil: 3VDC/.42ohms. Type: 2 Phase Bi-Polar 4 lead. 7mm dia. X 18mm steel shaft with a pressfit 1-1/2” dia. 36 tooth, sintered steel cog belt gear. Ball bearings, 3" leads, 4 corner mounting holes threaded M4.5, Removable steel mtg. bracket. Dimensions: L: 2-5/8"(Body) SQ: 2-3/16". New GE215  Contact Ted, the specialist for this product  Send an Inquiry 
24V STEP MOTORS
SLO-SYN SM-024-0065-RX STEP MOTOR
24v stepper motors. Step angle: 15 deg. Coil: 24V/9-11ohms/2.4A. Type: Uni-Polar 5 lead. 1/4" dia. X 1-3/16" steel front shaft with a removable plastic COG Belt pully. 1/4"dia. X 3/4" rear shaft with a Photo interrupter/Tach assembly. Dimension: L: 7-1/4" O/A 4-1/2" Body W: 2-1/4" Sq. Used GE217  Contact Ted, the specialist for this product  Send an Inquiry 
6.2V/1A SIZE 57 STEPMOTOR
57BYGH213 STEP MOTOR
Size 57 stepmotor, 6.2VDC/6.2Ohms/10mH. Type: 4 Phase Uni-Polar 6 lead, 1.8 deg. step angle. 9000g.cm holding torque. P/N 57BYGH213. 6.35mm (.25") X 19mm (.75") steel shaft. 4 corner mtg. holes. 24" leads. Overall dimensions: L: 2-3/8" Body Sq: 2-3/16". New GE231  Contact Ted, the specialist for this product  Send an Inquiry 
7.8V/2A STEPMOTOR
85BYGH450C-01 STEP MOTOR
Heavy duty size 85 stepmotor. 4 corner mounting holes. 24" leads. Coil: 7.8VDC/3.9Ohms/24mH. Type: 4 Phase Uni-Polar 8 lead. Step angle: 1.8 deg. 63Kg./cm holding torque. 13mm (.55") X 35mm (1-3/8") steel shaft. Dimension: L: 6" Body Sq: 3-3/8". Click on MORE INFO for specs in PDF format. New GE232  Contact Ted, the specialist for this product  Send an Inquiry 
Link to more info about this item
1.8 DEG. SIZE 42 STEPMOTOR
42BYGH4806 STEP MOTOR
52V/1A stepmotor, size 42. 5mm X 22mm steel shaft. 4 corner m3 threaded mounting holes and 24" leads. Coil: 52VDC/52 Ohms/5.2mH, type: 4 Phase Uni-Polar 6 lead, 1.8 deg step angle. 3200g.cm holding torque. Dimensions: L: 2"Body Sq: 1-5/8". New GE233  Contact Ted, the specialist for this product  Send an Inquiry 
24V LINEAR STEP MOTORS
EASTERN AIR DEVICES LB11ABM-4R LINEAR STEP MOTOR
24V linear stepper motors. 1/8" dia. X 3/8" rear shaft. 4-56UNS-3A threaded X 1-5/8" long steel front shaft, 4 mounting holes threaded 4-40. Coil: 24VDC/.96A/25ohms. Type: 4 Phase Uni-Polar 5 lead. Step angle:15 deg(motor). 12" leads. Dimensions: L: 1-7/8"Body Dia: 1-1/16". New/pulled GE238  Contact Ted, the specialist for this product  Send an Inquiry 
1.8 DEG. 2.88V STEP MOTOR
SHINANO KENSHI STH-56D309 STEP MOTOR
2.88VDC/2.4A stepper motor. Ball bearings, 5 in. leads. Removable anti-vibration bracket with mounting ears. 2 Phase Uni-Polar 6 lead, 1.8 deg step angle. Assembly#: 127K80020. 6.5mm dia. X 22mm steel shaft with a rollpinned 3/4” dia. 22 tooth, plastic cog belt gear. 4 corner mounting holes. Dimension: L: 2-1/4"(Body) SQ: 2-3/16". New GE247  Contact Ted, the specialist for this product  Send an Inquiry 
3V STEP MOTOR
SHINANO KENSHI STP42D4009 STEP MOTOR
1.8 Deg. 3V stepper motor. 4 corner m3x0.5 mounting holes. 5" leads. Coil: 3V/1.6 ohm. Type: 2 Phase Uni-Polar 6 lead, 1.8 deg step/rev. 5mm dia. X 24mm steel shaft with plasticl 21 tooth X 3/4" dia. cog belt pully. Dimension: L: 1-5/8" (Body) SQ: 1-9/16". New GE248  Contact Ted, the specialist for this product  Send an Inquiry 

1.8 DEG. SANYO STEP MOTOR
SANYO DENKI 103G770-1856 STEP MOTOR
3.5V/1.5A/2.4ohm/2.9mH Sanyo step motor. Ball bearings, 5in leads. 2 Phase Bi-Polar 6 lead, 1.8 deg. step angle. 6.5mm dia. X 18mm steel shaft with a pressfit 3/4” dia. 25 tooth, plastic cog belt gear. Removable anti-vibration bracket with mounting. ears. 4 corner mounting holes. Overall dimension: L: 2-1/8"(Body) Sq: 2-3/16". New GE249  Contact Ted, the specialist for this product  Send an Inquiry 
1.8 DEG. STEP MOTOR
ASTROSYN 23KM-K213-P7V STEP MOTOR
Four corner mounting holes with 4" leads. Coil: 3VDC/1.8 ohms/2.6mH. Type: 2 Phase Uni-Polar, 6 lead. 1.8 deg step angle. 1/4" Dia. X 1" steel shaft with press fit steel COG belt pully. Overall dimensions: L: 1-3/4" (Body) SQ: 2-3/16". New GE265  Contact Ted, the specialist for this product  Send an Inquiry 
SUPERIOR ELECTRIC M093-FD-8204E SLO-SYN STEPPING MOTOR
STEPPING MOTOR
Superior Electric M093-FD-8204E SLO-SYN Stepping Motor. Applications: Synchronous/Stepper, industrial cost effective motion control at slower rpm that is simple to use. Wiring Schematic and instructions included. 2.27VDC/7 Amps. Steps/Rev: 200 @ 60 HZ. Double flat shafts 3/8 inches/9.50mm/1 1/8 inches length. 4"H x 3-1/4"W x 8-3/4 inches long (including shafts). Weighs 8 pounds. Sells regularly for over $360.00. Brand new factory excess inventory. Please click picture for larger view. POR MF729  Contact Ted, the specialist for this product  Send an Inquiry 
STH-39D199 STEPPER MOTOR
Shinano Stepper Motor Assy 1.8 Deg 13 Ohms STH-39D199. $29.00 Ea. 4 in stock MG455  Contact Ted, the specialist for this product  Send an Inquiry 
Hard To Find! Lots in Stock!

1.8 DEGREE STEPPER MOTOR 5VDC - NEMA SIZE 23
ORIENTAL MOTOR U.S.A PK266-02A 2 PHASE STEPPER MOTOR 1.8 DEG 5VDC
The manufacturer in Japan is now well behind in production - but we have stock! Oriental Motor Vexta PK266-02A Nema 23 sized 5 volt, 1.8 deg stepper is connectorized with a 6 pin 22awg with Amp MTA156 connector. Original cost was over $70! These are new, unused. Over 8000 available. Click the "more info" icon to download the full spec sheet (56 pages) New $17.50 Ea/50. 30 in stock TS548  Contact Ted, the specialist for this product  Send an Inquiry 
Link to more info about this item
SUPERB ROBOTICS APPLICATION STEPPER!
HIGH TORQUE!
NEMA 17 6VDC, 1.8 DEG STEP LOW TEMPERATURE, LOW FRICTION STEPPER MOTORS - IDEAL FOR LOW TEMPERATURE OP
6VDC 1.8 DEG STEPPER MOTOR
A Nema 17 size high torque stepper! Tremendous for robotics projects. Compact (42.3 x 42.3 x 48mm) stepper motor features 6vdc operation, 1.8 deg/step, low 0.8A drain, and high rotor inertia of 82gm/cm2. Holding torque is a high 3400g-cm. Temperature range of -31deg C to +49 deg C makes it ideal for outdoor applications. Easy to adapt 5mm dia x 18mm long shaft with flat for easy coupling. Click the "more info" icon for the full drawing and more specs. Special large quantity pricing for universities! New/bulk 314 in stock TS758  Contact Ted, the specialist for this product  Send an Inquiry 
Link to more info about this item
WE CAN FIND THEM!
HAVING TROUBLE FINDING QUALIFIED VENDORS FOR MAJOR CORPORATE PURCHASES?
SURPLUSTRADERS.NET can solve your problem!

SURPLUSTRADERS.NET now offers a superior sourcing service for use by corporate clients with major purchase (in excess of $50,000US) requirements. We do the leg-work for you, find a viable vendor, then put you in direct contact with the vendor.
We operate on flat rate basis which takes into account the complexity and dollar value of the products you require.
This service is offered to our corporate clientele only and each requirement is analyzed before a fee-for-service quote is rendered.

For more information, please contact:
Ted Duskes, 1-800-341-6468 (ted@surplustraders.net)
or
Marshall Duskes 1-866-266-7638 (marshall@surplustraders.net) TS789  Contact Ted, the specialist for this product  Send an Inquiry 
OnlyBatteries
Click the graphic to visit ONLYBATTERIES.COM
 TS795  Contact Spencer, the specialist for this product  Send an Inquiry 

SUPERIOR ELECTRIC SLO-SYN
M061-LF-511
SYNCHRONOUS/STEPPING MOTORS
Superior Electric SLO-SYN DC Step Motors are brushless, permanent magnet motors that are easily adapted to different types of control. Over 60 available. New/as-is VA283  Contact John, the specialist for this product  Send an Inquiry 
AD022  Contact Ted, the specialist for this product  Send an Inquiry 
AD024  Contact Ted, the specialist for this product  Send an Inquiry 
AD031  Contact Ted, the specialist for this product  Send an Inquiry 
PRICE CUT!!! NOW ONLY $4.95
15 DEGREE 5VDC STEPPER
Eastman Kodak - Haydon 235747 35415. 15 degree, 5VDC 2.5W. Reversible, 4 leads. 1" dia x 1" long. 1-1/2" long x 1/8" diameter shaft. $4.95 Ea. 120 in stock CR283  Contact Ted, the specialist for this product  Send an Inquiry 
PF42T-48041 STEPPER MOTORS
Small stepper motor. PF42T-48041. 40mm dia. x 10mm H. 7 1/2" length of six multicolored wire with 6 pin connector. That's all we know about it. Made in Japan. $9.75 Ea. 34 in stock GA041  Contact Ted, the specialist for this product  Send an Inquiry 
MITSUMI 7.5 DEGREE STEPPER MOTOR
Mitsumi #M49SP-1, RH7-1320 01. 1.8 ohm. Approximately 1-7/8" diameter x 1-1/8" long. Two mounting ears. Tiny 4-prong male plug. 6000 brand new units available. Offers? MB593  Contact Ted, the specialist for this product  Send an Inquiry 
STEPPER MOTOR BOOK
Determine surplus stepper motor specs using simple easy to build test equipment. Design and build microcontroller-based control systems. (Flow charts and code examples included) Design and build stepper motor driver circuits. Analyze the mechanical characteristics of stepper motor driven devices. This book is full of experiments, circuits and code. $34.95 Ea. MD091  Contact Ted, the specialist for this product  Send an Inquiry 
MAGNETIC HEAD ASSEMBLY WITH STEPPER MOTOR ADJUSTER
1" diameter stepper motor rotates worm gear to raise and lower a magnetic head assembly, probably from an audio or data tape drive. The worm gear part of this device might be useful for other applications. The motor is a 6 wire, unipolar stepper. The travel of the worm gear is about 0.5". Mounted on a metal assembly 3.1" x 3.3." $9.50 Ea/10. MD649  Contact Ted, the specialist for this product  Send an Inquiry 
EPSON STEPPER MOTOR
Epson unipolar, 6 lead stepper motor. 0.98" diameter x 0.60" high body. 0.08 (2mm) diameter x 0.39" long shaft. Oval mounting flange has holes on 1.30" centers. 5" long leads. $2.39 ea/25. 2 in stock MD650  Contact Ted, the specialist for this product  Send an Inquiry 
55SI-25DAYA 12VDC 7.5 DEGREE STEPPER MOTOR
7.5 DEGREE STEPPER MOTOR
Model 55SI-25DAYA. 12VDC 7.5 degree stepper motor 36 ohms. Motor diameter is 2-1/8". Flatted shaft is 1/4" dia. x 3/4"L. Two hole mount on 11/16" centers. 6 wire input. Made in Japan. $12.85 Ea/10. MF218  Contact Ted, the specialist for this product  Send an Inquiry 
PRICES SLASHED!
11,000 17V 7.5 DEG STEPPER MOTORS AVAILABLE!
Model PFC25-24S1-01 by Nippon Pulse. 25 mm diameter by 15 mm length, 15 deg, 240 ohms bipolar, 14 mm shaft length, 69 mm lead length, 70 gm-cm holding torque, 17 V rated voltage Price: $1.50 - take all! Prices negotiable for smaller quantities. TF871  Contact Ted, the specialist for this product  Send an Inquiry 
15 DEGREE 5VDC STEPPER #MSDA020KK58
MSDA020KK58. 5VDC - 11 ohms. Very compact - only 7/8" dia x 3/4" long (plus 1" x 1/16" grooved shaft). With plastic mounting flange. No specs. $5.50 Ea/10. 10 in stock TD270  Contact Ted, the specialist for this product  Send an Inquiry 
 
Please refer to our stock numbers in all correspondence
Clicking on a Highlighted Stock Number or Highlighted E-mail link will call up a pre-addressed E-mail inquiry form.
Please check your return E-mail address to ensure accuracy, we want our reply to reach you.

Previous Category Page
Our Online Catalog consists of over 2000 pages geared to large quantity buyers and sellers
Use the "previous" and "next" icons to browse our catalog or
Click here to consult our MAIN INDEX

Updated: February 7, 2012
PLEASE SCROLL UP FOR PAGE CONTENT
Category: 0083