NEW CONTACT PHONE NUMBERS
|
Two available of these Baldor EM4313T 75 hp motors. Brand new. Suitable for pumps, compressors, fans, conveyors, machine tools and other applications where three phase power is available. Click the image for more photos and product
specs!
SA995
|
3/4" DIAMETER x 1-5/8" LONG
|
This motor will operate on 3 to 6VDC. 3/4" diameter x 1-5/8" long (includes shaft). The shaft alone in 3/8" long x 1/16" in diameter. The face of the motor has two tapped screw holes (1/2"
apart) for mounting. A fine quality little motor.
$0.99 Ea/50, $0.89 Ea/100, $0.79 Ea/250, $0.59 Ea/1000.
19085 in stock
TS610
|
MABUCHI DC MOTOR. Numbers appearing on this motor are FC-280pt-20150. The motor measures 1-1/4"L x 7/8"W x 3/4"H. The serrated shaft is 3/8" long. We have no other spec. This motor was made for Ford.
Made in Vietnam.
New
$24.95 Ea/4, $19.95 Ea/10, $17.95 Ea/25.
386 in stock
MF586
|
Click HERE to see our NEW 144 page catalog! CALL NOW TOLL FREE - 1 800 341 6468.
SA596
|
We have over 140 of these brand new, still in original box, motors available. Original acquisition cost was over $92 each. Open to offers! Click the "more info" icon for the specs.
TS600
MABUCHI FK-280PM-10887A. Diameter 18.3mm x 24.2mm - length 30.5mm. 6 - 15VDC (12VDC nominal). 15mm shaft. No load speed 13,600RPM @ 0.07A.
$1.45 Ea/500, $1.15 Ea/2500, $1.05 Ea/10000, $0.95 Ea/20000.
2000 in stock
TG691
|
|
WORKS ON ONE PENCELL! OVER 125,000 IN STOCK!
|
MABUCHI model RS-555PH-3255. What a find.... Originally designed to be installed in portable drills and printers. (Also works as a fine little generator) This model features improved design to reduce external noise levels. Has
"wrap around" magnetic shield. High torque 380.3 gm-cm with a stall-torque figure of 1360 gm-cm. An excellent find for the small or medium sized OEM who requires modest quantities of this quality product but cannot satisfy the manufacturer's
demand for large quantity purchases. Hundreds of application in Robotics, the RC field etc. (shaft is 1/4 flat - stainless steel 1/8" dia). No load speed is 5500RPM - excellent for "gearing down" to provide ultra high torque for larger
projects. 1-7/16" dia x 2-5/8" long. Flatted shaft is 1/2" long. 3/16" push on terminals. Check the spec sheet by clicking the "more info" icon. For a larger photo, click on the photo above. This unit features 5
pole construction for higher torque and power efficiency, anisotropic magnets, and coil specs of 55 turns of 32mm wire. We have tested this motor on one alkaline pencell and find that it will deliver useable torque at reduced RPM. Superb for school
projects.
ATTENTION: IMPORTERS / EXPORTERS -
Call Ted Duskes at 800-341-6468 (514 739 8723) to negotiate large quantity pricing on this high quality, high power motor. (If you can use the entire lot - call Ted at 514-739-8723 for a very
special deal)
109788 in stock
MD522
|
Over 7,000 Mabuchi FK260SA-14280 motors available. Oval shape with dimensions of: 1-3/8" long x 7/8" wide amd 1/16" dia. shaft which is 9/16" long. We believe that this motor was originally for
use in Rearview mirrors, electric shavers, credit card readers and other low voltage, low current applications. Electrical specs for this motor, in JPG format, are available by clicking the MORE INFO button. These units are brand new, packed 200 per
carton.
3 in stock
DC330
|
VON WEISE model V05366AB07 1/8 HP, 115VDC/1.4A electric motors. 148:1 ratio. Continuous duty. We have available approximately 60-75 motors. We also have 20 new pulleys with bushings available.
MG610
What a find - Mabuchi RK370CA-18260, 6-18vdc 8,500 rpm motor. Nominal voltage - 13vdc. Check the full spec sheet - click the "more info" icon. These units are supplied with lead wires and mini connector installed (not shown
in photo).
New
$2.90 Ea/250, $3.50 Ea/100, $4.19 Ea/50, $4.79 Ea/20.
TS375
These were used by the military to drive hydraulic pumps. Power 24vdc, 4.75 HP, 175 Amp - turns 7500rpm with clockwise rotation. Designed for continuous duty, these are base mount units and feature a 12 tooth spline (female) of
approx 0.70 dia. 11.75" x 5.5" x 9.5". Only about 10 pcs still available.
Used
TS546
|
Popular for Automotive Use!
|
MABUCHI DC MOTOR. The motor measures 1-1/4"L x 7/8"W x 3/4"H. The serrated shaft is 3/8" long. We have no other spec. We believe that is a common motor model found in many different automotive
applications such as mirror adjust, door lock, and other remote operated devices. No sure of specific applications!
New
$24.95 Ea/4, $19.95 Ea/10, $15.00 Ea/50.
386 in stock
TS519
|
What a find - this 12vdc mini motors was originally designed for use in automotive mirror applications, but has thousands of other uses in hobby, micro-tool, RC and educational applications. No load speed is a hefty 8200 -
11000rpm. Stalled torque is 3.75oz-in and stall torque is 5.0A. Click the "more info" icon for the full drawing and specs.
TS458
|
12VDC 3600rpm (no load speed) top quality motor by Buehler. Model 11305707502. 1/8" shaft. Stall torque is 9Ncm and stall current is 3.3A. Click the more info icon for the complete drawing and spec sheet.
$9.95 Ea/5, $8.95 Ea/10, $6.95 Ea/25.
293 in stock
TS188
|
|
BIG - Hi-POWER - HI TORQUE!
|
Buehler 12VDC motor model 11307520400. Large, 3" diameter, 4.75" length - hi-torque (304Ncm stall torque) motor is ideal for a multitude of robotic and model applications. Originally intended for use in linear actuator
application. No load speed is 6000 rpm and stall current is 160A. Reversible. Click the more info icon for full specs and drawing. Click photo for larger image. The slotted output shaft is ¼" diameter x 5/8" long. The motor weighs 6
pounds. This is an exceptional motor. As a generator, it develops approx 2 volts per 1000 rpm.
$69.95 Ea, $59.95 Ea/10, $49.95 Ea/50, $39.95 Ea/100.
886 in stock
TS189
|
Mabuchi RF-500TA-10750. These motors will operate on 0.7VDC to 9VDC. (draws from 10ma to 100ma) Great solar motor. Will run one month on a single "D" cell! Size: 1-1/4" dia x 9/16", with a shaft that is
1/16" dia. x 3/8" long. Bronze self-aligning bearings. 3 pole construction, stamped, forked metallic brushes, ring isotropic magnets, and coil specs of 750 turns of 10mm wire. 5" long black and white wire leads soldered to solder
terminals. Packed 250 pieces per carton. Mounting hole spacing is 26mm.
$4.95 Ea/25, $3.75 Ea/50, $3.49 Ea/100.
4114 in stock
TE162
|
Operates on from 12VDC to 24VDC. 5,000RPM at 12VDC. 2" overall length x 3/4" wide. 1/2" long plastic worm gear is press fitted on a 1/16" dia. shaft. 1,000 available at press time.
$9.95 Ea, $5.95 Ea/25.
1 in stock
MF310
|
10,000 IN STOCK AT PRESS TIME!
|
You get our most popular Mabuchi 12VDC motor (brand new surplus from a power tool manufacturer) along with a CSA/UL approved 110VAC/60Hz plug-in wall power supply. The power supply delivers 12VDC at 800MA. The power supply
has a 10 foot output cord with an inline on/off switch. Connect them up and you have a powerful motor with a hundred applications.
$4.45 Ea/25, $3.95 Ea/50, $3.45 Ea/100.
MG280
|
|
GREAT SCHOOL PROJECT KIT!
|
A complete set of parts (battery not included) and instructions to build a real live, working motor. An introduction to the workings of the DC electric motor. A creative experience that no junior experimentor will ever forget.
"Watch it come to life" A number of experiments are included in the instructions, which the teacher can use to get young minds thinking. Snaps together. No soldering required. Operates on one AA battery. Contains all you see here.
$22.85 Ea, $19.95 Ea/5, $17.45 Ea/25.
MG252
|
Surplus Traders has available the following inventory IN STOCK! Product will be shipped from our warehouse in NY state. Please allow for list to be fully down-loaded. Use CTL + F to locate the product you are searching for. In
the event you cannot locate your requirement, please contact Ted Duskes at 514 739 8723 - we may have other viable alternatives.
TS291
Surplus Traders has this inventory in stock!
Product will be shipped from our warehouse in NY state. Please allow for list to be fully downloaded. Use CTL + F to locate the product you are searching for. In the event you
cannot locate your requirement, please contact Ted Duskes at 514 739 8723 - we may have other viable alternatives.
WA940
Here is a tutorial that explains in simple "baby talk" how little DC electric motors work. Take a few minutes to read it over, and enjoy learning what makes them spin. A little knowledge goes a long way and can serve you
well if you work in the world of motors. Enjoy! 
MG043
|
Powerful 12VDC motor. 1.7" diameter x 2.62" long. 0.2" diameter x 1.16" long shaft is threaded at end. Mounted with two screws on a nylon bracket. Draws 12VDC @ 1.3 Amps. Prepped with 8" leads, a thermal
cut-off, and a momentary slide switch.
$6.85 Ea/10.
MF947
Buhler brush-commutated DC motor. Quiet, smooth operation from 6-42Vdc. 1.9" diameter x 2.54" long. Nominal, no-load speed, 8000 RPM @ 30VDC. 6mm diameter shaft. Rear shaft is flatted, 0.6" long. Front is 0.85"
long and has a brass worm gear attached. 4" pigtail leads.
$18.85 Ea/5.
MF952
Johnson Motor. Powerful permanent magnet motor. Works well from 3 Volts DC. 1.47" diameter x 2.53" long. Shaft, 0.125" diameter x 0.37" long. 12,000 RPM @ 6 Vdc. 1.2 Amp. Solder lug / 0.187" qc
terminals.
$6.85 Ea/25.
MF953
Buehler fine-quality, ball bearing motor. Operates smoothly on 3VDC to 24 VDC. 80mm long x 40mm diameter. 4mm diameter shaft is 49mm long. Test data: 3VDC/122mA=495 RPM. 12VDC/144mA = 2289 RPM. 24VDC/166mA
= 4702 RPM. Torque 5.8 oz-in/Amp 41mNm/Amp. Resistance 3.5 Ohms. Used, removed from working equipment. Includes connector with 6" lead wires.
Used
$18.90 Ea/5.
MF954
|
Operates smoothly on 3-36VDC. 24VDC, 40 mA, no-load rating. 1.6" long x 0.91" x 0.71." 0.08" (2mm) diameter x 0.53" long shaft. Solder terminals. Please click picture to see a larger view.
$2.95 Ea/25.
MF858
Escap precision Swiss-made, brushed DC motor. 16mm diameter x 15.7mm long. 1.5mm diameter x 6mm long shaft. 16000 RPM @ 15VDC, 6.9MA no-load measurements. Two M1.6 x 1.4 tapped mounting holes on 10mm centers. 5" pigtail
leads. Please click on image to see a larger view.
$19.85 Ea/5.
MF859
0riginally made to drive sliding track in electric automotive seats. Permanent magnet type motor. Dual flexible output shafts are 1/8" square. (Similar to speedometer cable). This motor would normally be mounted within the
seat frame. Brand new units - removed from equipment. 12 VDC2.5 amps (no load). 4400 RPM. Reversible. The motor is totally enclosed. Intermittent duty. 2 threaded mtg holes at one end of the motor body. 15" end/end on shafts. Motor body is
1-3/4" x 1-1/2" x 4-3/4". 2 lbs.
$29.45 Ea/10.
MF831
Johnson motor, operates between 12 and 30 Vdc. 24 Vdc @ 50 mA, no-load rating. 0.94" diameter x 1.15" long. 2mm diameter x 7mm long shaft. Solder lug terminals.
$2.35 Ea/100.
MF839
Mabuchi FF-130RH. 25mm long x 20mm x 15mm. 2mm diameter shaft extends 6mm from both ends of motor. Operates smoothly from 3 to 8 Vdc. No-load specs: 3Vdc, 0.045A, 5400 RPM.
$3.95 Ea, $2.85 Ea/10.
7 in stock
MF826
5500 RPM @ 12 VDC/27 MA (no load measurement). 1.29" diameter x 0.98". 2mm flatted shaft is 8mm long. Prepped with 3" leads with a two-pin connector. Please click image for larger view.
$2.45 Ea/10.
MF828
2538 RPM at 12VDC. Shaft Size:15/16" & 9/16" x 3/32" dia. Size: 1-1/4" L x 1" dia.
$3.80 Ea/25.
MF724
Canon EN35-T10121A reversible 6DC motor with 10 inch shielded power cable. Measures 1-5/16 inch Dia. X 1-3/8 inches L. Delivers 1135 RPM at 6 VDC/42mA, 2250RPM at 12 VDC/55mA, 2250 RPM at 18 VDC/ 64mA or
24VDC/75Ma at 4000 RPM. The shaft size: 3/8 inch X 1/8 inch Dia. Quiet running. POR
MF725
24VDC high speed 12,000 rpm. Overall length: 3-1/8". Overall width 1-3/8". Shaft length 5/8". Shaft dia 1/8"
$6.85 Ea/25.
MF726
Top quality Buehler motor originally dssigned for use by Xerox. Nominal volatge is 16vdc, but will run at much lower levels. Stall torque is 6.2Ncm. No load speed is 5800 and no load current is only 0.17A. Please click the more
info icon for the comple spec sheet and drawing.
$8.95 Ea/10, $7.95 Ea/25.
45 in stock
TS186
Compact 12vdc motors has no load speed of 9200 rpm and a load speed of 3400rpm (with 0.7Ncm load). Stall torque is 1.2Ncm and stall current is 1.1A. Exceptional motor for compact model appliocation where a low current motor is
needed. Overall length is just under 1". Complete specs - please click the "more info" icon.
$5.95 Ea/10, $4.95 Ea/25, $3.95 Ea/100.
249 in stock
TS190
Exceptional, compact 24vdc motor is rated 9200rpm no load speed, and 3400rpm with a 0.70Ncm load. Stall current is 0.5A and stall torque is 1.2Ncm. Excellent for model applications where a multi-pack series group of 3.7 li-ion
cells is used. Shaft length is approx 0.5". Click the more info icon for the full spec sheet and drawings.
$4.95 Ea/10.
33 in stock
TS191
|
High performance 1.5" long, 3/4" wide and 1" high motor features low current drain under load (0.3 Ncm and 4510 rpm). 1/2" long shaft. No load speed is 5800rpm with current drain of only 85ma. Click the
"more info" icon for full specs and drawing.
$3.95 Ea/10, $3.50 9/25, $2.99 Ea/100.
237 in stock
TS192
|
GEAR MOTOR WITH WORM REDUCTION
|
Originally manufactured for use by Xerox, this gear motor with worm reduction produces a shaft speed of 240 - 268rpm under load (54Ncm) with a current drain of only 1.285 A. Click the "more info" icon for full specs and
drawing.
$29.95 Ea, $24.95 Ea/10, $19.95 Ea/50.
233 in stock
TS193
|
Designed to meet exacting Xerox standards, this Buehler beauty is a powerhouse... produces 80Ncm torque with only 0.68 - 0.83A draw at 77 - 94Rpm - or 114-133rpm @ 20Ncm torque with only 0.195 - 0.290A draw. Can be used
bi-directionally. Full drawing and specs available - click the "more info" icon.
$49.95 Ea/2, $39.95 Ea/5.
12 in stock
TS194
|
25VDC operation. Produced originally for use by Xerox, this 2.7" (overall length) gearmotor features a semi-flat shaft for ease of adaptation to your specific requirments. 80rpm no load speed with only 140ma current draw. At
31Ncm, speed is 74rpm and drain is a low 500ma. Click the "more info" icon for full specs and drawing.
$29.95 Ea, $24.95 Ea/5.
33 in stock
TS195
24VDC gearmotor is 2.7" long (not including shaft, which is .9" long or gearhead 0.75"). Gear ratio is 30:1. Bi-directional operation. At 50Ncm torque, speed is 180rpm and current drain 830ma. Full specs and drawing
available - click the "more info" icon.
$25.95 Ea, $19.95 Ea/5.
19 in stock
TS196
|
High performance Buehler model 16104615500 12VDC gearmotor. Draws only 650MA at a load of 7Ncm and operates at 330rpm. Shaft is 0.20" diam x 0.37" long semiflat. Can be used bi-directionally. No load speed is 490rpm. Click
the "more info" icon for full specs and drawing!
$29.95 Ea, $19.95 Ea/5, $17.95 Ea/10, $16.95 Ea/20.
348 in stock
TS197
|
12VDC operation. Buehler model 16104615600. Heavy duty, 2.5" length, 1.3" diameter gearmotor features a semiflat shaft (approx 1/8" dia x 1/2" length) and bi-directional operation. At a load of 20Ncm, speed
is 106rpm and current drain is 650ma. Full drawing and specs - click the "more info" icon.
$19.95 Ea/5, $17.95 Ea/10, $16.95 Ea/25, $12.95 Ea/100.
541 in stock
TS198
|
|
12VDC - 30NCM TORQUE GEARMOTOR
|
Excellent for modellers, robotics, small electric vehicle experiments, etc. Great Buehler model 16104615700 12VDC gearmotor is 2.8" long x 1.4" diameter. Shaft is 0.20" semiflat x 0.5" length. Bi-directional
operation. At 12vdc, 390ma, speed is 42rpm and torque is 30Ncm. For full specs,. click the "more info" icon.
$29.95 Ea, $17.95 Ea/10, $15.95 Ea/25, $12.95 Ea/100.
501 in stock
TS199
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. Bi-directional operation. This is a great motor
for modellers, robotics, science projects, etc. Full drawing and specs - click the "more info" icon.
$14.95 Ea, $12.95 Ea/10, $11.95 Ea/25, $9.95 Ea/100.
434 in stock
TS200
|
Compact gearmotor is only 2.4" long x 1.4" dia. Shaft is semiflat, 0.20" dia x 0.40" length. Under load (4.2Ncm) speed is 715rpm, current drain is 0.75A @ 13vdc. This is a great motor for modellers, robotics,
science projects, etc. Bi-directional operation. Full drawing and specs - click the "more info" icon.
$14.95 Ea, $12.95 Ea/10, $11.95 Ea/25, $9.95 Ea/100.
1214 in stock
TS201
Powerful little motor (also works as a generator) capable of running on 12VDC to 20 VDC. Size: 1-3/8" dia x 2-3/8" long. Dual 1/8" dia shafts extend 3/8" on one end and 1/2" on the other
end. Numbers 65780 and 364322 are stamped on the case. 3/16" male push on terminals at the rear of motor. The front has dual threaded holes on 1" centers. Bronze bearings. We have matching 20VDC/1.5A power supplies (MB678). When powered
with this power supply motor cannot be stalled by grasping the 1/8" dia. shaft.
$19.95 Ea/3, $17.45 Ea/10.
176 in stock
MB679
N60GA6617. This DC motor is a bit of a mystery. All we know about it is the PART number. 1-1/8" long x 1/2" dia. The needle shaft in 1/4" long. Seems nice quality.
$2.95 Ea/10.
9 in stock
MF573
|
DOUBLE FLATTED SHORT SHAFT!
|
Mabuchi RC-260RA-08570 (BD152913) mid sized motor (click "more info" icon for drawing - note that double flatted shaft is as per photo above). The DC connection terminals on this model have been designed to allow for
soldering and mounting purposes - they are flat and parallel to the face of the motor. Ultra-unique, this model was designed for a high duty cycle point of sale device.
$3.95 Ea/20, $2.95 Ea/50, $1.95 Ea/250.
395 in stock
TS124
|
|
UNIQUE DOUBLE FLATTED SHAFT
|
Mabuchi RC-260RA-08570 (BD162917) mid sized motor (click "more info" icon for drawing - note that double flatted shaft is as per photo above). The dc connection terminals on this model have been designed to allow for
soldering and mounting purposes - they are flat and parallel to the face of the motor. Ultra-unique, this model was designed for a high duty cycle point of sale device.
$3.95 Ea/20, $2.95 Ea/50, $1.95 Ea/250.
393 in stock
TS125
|
Mabuchi FC-130RF-VD154409. A truly unique mini motor with ultra small, flat shaft allows construction of ultra miniature projects. Flat shaft allows easy attachment of accessories, etc. Click on the "more info" icon to see
a detailed drawing - NOTE: shaft on units we are selling is much shorter than shown in the diagram... as per the photo on this web page. Designed for 12VDC operation in industrial heavy duty applications.
$2.19 Ea/20, $1.79 Ea/50, $1.19 Ea/100, $0.99 Ea/500.
6566 in stock
TS126
Mabuchi FC-130RF-VN05415. A truly unique mini motor with ultra small, flat shaft allows construction of ultra miniature projects. Flat shaft allows easy attachment of accessories, etc. Click on the "more info" icon to see a
detailed drawing - NOTE: shaft on units we are selling is much shorter than shown in the diagram... as per the photo on this web page. Designed for 12VDC operation in industrial heavy duty applications.
$2.19 Ea/20, $1.79 Ea/50, $1.19 Ea/100, $0.99 Ea/500.
9209 in stock
TS127
Small, but powerful DC motor. 0.40" x 0.32" x 0.66" long. Operates on 1.5 to 3.6VDC. 110MA @ 3VDC no load. 500mA with load. 1mm diameter x 4mm long shaft. Solder-lug terminals.
$2.90 Ea/10, $3.95 Ea.
MF380
|
General Electric small, permanent magnet motor made-in-USA, circa 1976. 4000 RPM @ 1 Amp, no-load specs. 3000 RPM @ 1 oz-in torque @ 2.5 Amps (intermittent duty). 1.35" long x 1" x 0.86". Flatted shaft is
0.093" diameter x 0.185" long. Tabs can be wrapped and soldered.
$1.29 Ea/100.
MF381
4,000 RPM @ 12VDC/25MA - No Load. 25.5mm diameter x 25mm long. 2mm diameter x 13mm shaft. Two threaded 3mm mounting holes on 17mm centers. Solder-loop terminals. Made by Canon Precision.
$2.95 Ea/25.
MF383
Small, but powerful Molon DC motor. 1.08" diameter x 1.5" long. 0.095" diameter knurled shaft is 0.41" long. Operates over a range of 9-18 Vdc. No load rating: 13,500 RPM @ 12Vdc, 0.28A. With load:
11,100 RPM @ 1.4 Amps. Solder lug terminals.
$4.65 Ea/25.
MF384
Mabuchi RF-500T-10750. GREAT SOLAR MOTOR! 2,700 RPM. These motors will operate on 1.5 - 12.0VDC (draws from 20ma to 85ma) Great solar motor. Will run one month on a single "D" cell! Size: 1-1/4" dia x
9/16", with a shaft that is 1/16" dia. x 3/8" long. Mounting holes are 24mm spacing (which is different than on the spec sheet - please note). Bronze self-aligning bearings. 3 pole construction, stamped, forked metallic brushes,
ring isotropic magnets, and coil specs of 750 turns of 10mm wire. 5" long black and white wire leads soldered to solder terminals. Packed 250 pieces per carton. Click the "more info" icon for the full spec sheet.
$4.95 Ea/10, $4.50 Ea/25.
36 in stock
TS001
|
|
START YOUR OWN BUSINESS ON THIS PAGE
|
Yes - we can help you start your own AC & DC electric motor, parts & equipment business. You can start your business on this very page and get customer inquiries that will lead to solid sales. Get started today. For furthur
information please call Marvin Birnbom at 514-739-9328. Mention offer
MF715
|
Minimotor type QR915C. 9VDC. 1500RPM. Robust brass contruction. 1-1/2"dia. x 1" high. 1/16" dia shaft has 5/8" dia. brass pully and extends 3/4" overall from the body of the motor. Front of motor
has 4 tapped mounting holes. Solder tabs. Made in Japan. Our guess is that it is a cassette deck motor. 10,000 available. POR
SA079
Marked JEI HK. HF2000. As pictured; 1-1/4"L x 7/8" W. 1/16" dia. shaft extends 3/8". Solder tabs. This is a quality motor. We guess that it runs on between 6VDC and 12VDC. We are not certain of
the exact spec. 10,000 available. POR
SA081
12 VDC/150MA (no-load) motor. Operates efficiently ob 6 to 18VDC. Plastic base with metal rotor. Base is 1.45" diameter with two mounting ears. 1.8" mounting centers. Metal rotor is 1.48" diameter. Overall height of
motor, excluding shaft is 0.9." 0.12" diameter shaft x 3.03" long extends from both ends of motor.
$8.25 Ea/25.
ME849
1.35" diameter x 0.84" DC motor, probably designed for cassette player or other audio application. Motor is wrapped in three layers of a thin metal shield. 0.08" (2mm) diameter shaft with plactic pulley. Solder-hole
terminals. Six threaded mounting holes in face of motor.
$3.25 Ea/25.
ME851
Fun with gears and motors. Small 3VDC motor, metal bracket and axles, and an assortment of small plastic gears and collars to produce a gear train of various ratios. Includes; 3VDC motor, metal shafts, spur gear, double spur
gear, face gear and pinion gear. Operates on 2 AA batteries (not included).
$14.95 Ea, $12.45 Ea/5.
3 in stock
ME689
We have been offered the following brand new motors; HURST: 3 each of (PCDA) 990535, 2 each of (PC) 990525, 2 each of (PCDA) 990513, MAXON: 3 each of 118783. I am accepting offers for this lot. Ted 514-739-8723
ME573
Automotive side-view mirror assembly consists of two small 12VDC motors with push/pull worm-gear mechanisms. The motors raise and lower a 4.28" square plastic platform. The worm-gear mechanisms can push or pull depending on
polarity and will allow manual adjustment without voltage present. Each motor / worm-gear assembly is independent, protected with a rubber boot for moisture protection. The motors can be separated from the larger assembly by breaking off the mirror
platform (see instructions). Overall thickness of motors and platform is approximately 2".
$18.85 Ea/10.
ME527
We have just acquired a large quantity of 12VDC Mabuchi FC-130SM-17909A 1" x 0.6" semi flat motor with 2.0mm (.08") diameter 1.5mm (1/16") long flatted shaft. We do not have the full specs on this motor, but
check the spec sheet on similar models (different voltage) by clicking on the "more info" icon. Photo on spec sheet shows long shaft - these units have a 1/16" long shaft - making them ideal for ultra-compact rc and science fair projects.
This unit features 3 pole construction, carbon brushes, anisotropic magnets and low noise construction. Coil is 179 turns of 9mm dia wire. Originally used in automotive applications.
$3.95 Ea, $2.25 Ea/100, $2.00 Ea/500, $1.85 Ea/1000.
26263 in stock
TS026
|
Mabuchi RS-365 12-42 Vdc motor. Nominal ratings: 10500 RPM @ 24 Vdc, 0.08 Amps. 1.09" diameter x 1.5" long. 0.09" diameter shaft extends 0.66" one one side of motor, 0.35" on other side. Two tapped holes
(M2.6 x 0.45) on shaft side of motor, 0.63" mounting centers. Solder terminals prepped with 5" leads.
$3.95 Ea/10.
ME424
|
|
OVER 10,000 ON THE SHELF!
|
We have just acquired a large quantity of 12VDC Mabuchi RC-260RA 1" dia (23.8mm) x 1.05" (26.9mm) motor with a short 2.0mm (0.08" ) dia. shaft x 4mm long. We do not have the full specs on this motor. We do know that
this unit features carbon brushes, 3 pole construction, segmented isotropic magnets and has coil specs of 281 turns of 25mm dia wire. . Originally used in automotive applications.
$2.25 Ea/100, $1.99 Ea/500, $1.85 Ea/1000, $1.49 Ea/5000.
11407 in stock
TS025
|
Thermally protected, plastic encased brush-type motor operates well on both 120VAC and DC voltage above 18 Volts. Rated 120VAC, 60 Hz, 50W, 0.42 Amps. 14,000 RPM @ 120 Vac. 3,500 RPM @ 30 Vdc, 240 mA (no-load). 6mm
(0.24" diameter) x 1.5" long flatted shaft. Motor case is 2.93" x 2.43" x 3.45" long with two tapped mounting holes in motor face. 6.5" leads. UL.
$9.45 Ea/10.
ME236
We have NMB 1606kl-04W-B50, 12VDC/.110ma, DC Brushless fans for sale. Please contact Marshall Duskes @ 514-739-2950 for purchasing info.
WA806
SYNCHRON 28VDC motor. 600 RPM. SIZE: 2"DIA. x 1"H. 32 teeth plastic gear.
$3.95 Ea/25.
MD995
Maxon precision motor (model 43.032.000-22.00-146) with DC motor-Tach - Motor specs: 18vdc, 32mA., 5280 RPM no load - Torque const. 285 oz-In - Max cont. current 952 mA - Max cont. torque 280 oz-in - Tach output: 0.5
vdc/1000 RPM - Dimensions: 1.26"L (32mm) dia. x 3"L., 0.512" (13mm) Pilot, Face mount (4)tapped holes on 3/4"B.C. shaft 0.158"(4mm)dia. x 3/4"L POR
MD998
What you see is what you get. Two DC motors mounted side by side on a neat mounting bracket. Each motor is 1.5" dia. x 1.25" high and each has a 1/16" shaft with a pulley secured by set screws. Our guess is that
they powered a 12VDC automobile tape player. 10,000 available.
$9.80 Ea/5, $5.60 Ea/25, $4.65 Ea/100.
1 in stock
SA080
This brass encased motor bears part number: 59C43994C01-C (NN80) 7730. The motor is 1-1/2" dia. x 1-3/8" long. The 1/8" dia. shaft is 1/2" long and bears 1/2" dia. brass pulley. Two
rubber vibration damping gaskets suggests that this could be a 12VDC cassette drive motor. 2 3" wire leads are stripped and tinned. The motor is encased in a "slip-on" flanged mounting case. Close inspection suggests it was made in Japan.
10,000 available. POR
1 in stock
SA083
|
This motor is 1-5/16" dia x 1" high. The shaft has a dual belt drive 3/8" dia pulley. Other numbers also appearing on the motor are; CM32-02401 and 5YGF. Made in Japan. Removed from brand new automobile
cassette drive mechanisms.
$9.95 Ea/25.
MD894
We have just acquired a small quantity of Mabuchi RC-260RA 1" dia (23.8mm) x 1.05" (26.9mm) motor with 2.0mm (0.08") diameter, 10mm (3/8") long shaft. We do know that this unit features carbon brushes, 3 pole
construction, segmented isotropic magnets and has coil specs of 255 turns of 25mm dia wire. Originally used in automotive applications.
$2.25 Ea/100, $2.00 Ea/500, $1.85 Ea/1000.
1819 in stock
TS024
|
This is a precision engineered unit originally designed to operate a counter top display. 1.5VDC to 3VDC motor operates on one "D" cell to provide 1700 RPM. This is geared down to drive an oscillating arm that can be
attached to signage or any other attention getting display. Overall size including battery case 4-3/4"L x 4-3/8"W x 2"D. Brand new units. Click here for full sketch of
the motor. 110/master carton. Sample orders accepted - 10 units for $170 including UPS ground within the continental USA. Individually cartoned.
$9.95 Ea.
1 in stock
TG230
|
25,000 available - brand new, in original factory packaging. Original typical OEM cost over $4.00 each. Ideal for: door locks, washer pumps, carburetor actuators, hair dryers, corn poppers, ventilation fans, etc. 8850rpm @
max power (3.29 amps and 18.7mNM torque). Full drawing available - click here! . This is an excellent opportunity for OEMs to get a great deal on a very versatile motor. Contact us today.
Sample available to qualified buyers. This unit is available for large volume sales only.
$1.95 Ea/10000.
4 in stock
BD009
|
1-1/2 to 3VDC MOTOR. Dual shaft motor operates well on 1.5 to 3 Vdc. 3/32” diameter shaft is 0.58”long on one side and 0.4” long on the other. Motor is 1.08” diameter X 1.47” long. Solder loop
terminals.
$3.85 Ea/25, $4.65 Ea.
128 in stock
MC876
Operates on 1.3VDC@80MA. 7/8" x 3/8" x 1/4". Used in pagers, cell phones and vibrating batteries. 1-1/2" leads with mini 2 pin connector.
$4.45 Ea/25, $3.45 Ea/100, $3.25 Ea/500, $2.95 Ea/1000.
189 in stock
MC099
|
Mabuchi # FF-N20PN. Miniature 1.5 to 3 Volt DC motor. Ideal for models and radio controlapplications where small size is important. No load rating: 15,800 RPM @ 2.4 V, 96 mA.Length (excluding shaft), 0.654” long x
0.47” x 0.39”. Shaft is 0.039”(1mm) diameter x 0.13” long. Solder-loop terminals.
$0.89 Ea/500.
2576 in stock
MC425
Easy to assemble kit - Velleman # k8004. Ideal for accurate control of DC motors, lighting levels and small heaters as well as other applications. The cirtuit converts DC voltage into a series of pulses, the duration of which
is directly proportional to the voltage. Minimizes power loss in the control circuit. Overload and short circuit protection. Input Voltage: 2.5 -25 VCD. Maximum output 8-35 Vdc, 6.5 Amps.
$49.50 Ea.
MC432
2,900 pieces, 5 VDC operation, model SM1230A (13,000 rpm @ 100ma - no load). Under load: torque is 8g.cm at 360ma (8800RM). Used originally in automatic cameras (probably used for film winding and telephoto zooming). Ultra
compact - only 12mm diameter x 30mm length with approx shaft diameter of 1.5mm. Ideal for micro products, mini robotics, etc. Shipped FOB Korea warehouse.Also available:
30,000 pcs model SM1215C, zooming motor for camera
4800 pcs Mabuchi motor
RF-N60CA-05744A
$8.95 Ea/10.
22 in stock
TG339
|
7,476pcs of Zhongshan E. M. & A Gen-115VDC 60 Hz 0.9A - 15W 1550 RPM CLA TPL 199 # E18093A available. These motors are equivalent to the Grainger exhaust motor #18, or the Fasco # D120. These units are the size of a
coffee mug and are counter clockwise rotation. The original FOB factory price is $23.95US per unit. Application for this motor seems to be mostly for bathroom exhaust fans. Offers considered for min. 2,000 lot.
DA066
Ametek #116854-00 - Brand New - only 800 pcs available! Ref. Sensidyne P/N 401791.Specifications: No Load Speed: 4000-4800 RPM. No Load Current: 190 mA Maximum. Resistance Line to Line: 4.53 to 3.70 Ohm.
Torque Constant: 7.8 to 7.0 Oz in/Amp. Speed Constant: 150 to 140 RPM/Oz in. (for current draw less than .4 Amp. Click here for specs! Offers?
$75.00 Ea/50, $68.50 Ea/100, $62.00 Ea/200, $55.50 Ea/300.
TF519
|
Dec 12-19267 REV.B.. Also Hitachi D04a191E. 3" long x 1.5" diameter. 1/8" diameter x 3/4" long shaft. 4 wire lead. only 1 left.
$29.85 Ea.
1 in stock
CX261
AD022
|
.&stock_q
ty=0&img_name=ts375.gif&img_width=200&img_height=134&img_alt=MABUCHI RK-370CA-18260 6-18VDC DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20of%20%61pprox%200.70%20di%61.%2011.75%22%20x%205.5%
22%20x%209.5%22.%20Only%20%61bout%2010%20pcs%20still%20%61v%61il%61ble.&stock_qty=0&img_name=ts546.gif&img_width=200&img_height=200&img_alt=WESTINGHOUSE 24VDC 4.75HP MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20di%61mete
r%20x%200.53%22%20long%20sh%61ft.%20Solder%20termin%61ls.%20Ple%61se%20click%20picture%20to%20see%20%61%20l%61rger%20view.&stock_qty=0&img_name=mf858.gif&img_width=140&img_height=87&img_alt=DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%20This%20motor%20would%20norm%61lly%20be%20mounted%20within%20the%20se%61t%20fr%61me.%20Br%61nd%20new%20units%20-%20removed
%20from%20equipment.%2012%20VDC2.5%20%61mps%20(no%20lo%61d).%204400%20RPM.%20Reversible.%20The%20motor%20is%20tot%61lly%20enclosed.%20Intermittent%20duty.%202%20thre%61ded%20mtg%20holes%20%61t%20one%20end%20of%20the%20motor%20body.%2015%22%20end%2Fend%20o
n%20sh%61fts.%20Motor%20body%20is%201-3%2F4%22%20x%201-1%2F2%22%20x%204-3%2F4%22.%202%20lbs.&stock_qty=0&img_name=mf831.gif&img_width=197&img_height=36&img_alt=12VDC MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%201.29%22%20di%61meter%20x%200.98%22.%202mm%20fl%61tted%20sh%61ft%20is%208m
m%20long.%20Prepped%20with%203%22%20le%61ds%20with%20%61%20two-pin%20connector.%20Ple%61se%20click%20im%61ge%20for%20l%61rger%20view.&stock_qty=0&img_name=mf828.gif&img_width=140&img_height=106&img_alt=
"Contact ted, the specialist for this product"){kind=small}
.%20St%61ll%20torque%20is%201.2Ncm%20%61nd%20st%61ll%20current%20is%201.1A.%20Exception%61l%20motor%20for%20comp%61ct%20model%20%61pplioc%61tion%20where%20%61%20low%20current%20motor%20is%20n
eeded.%20Over%61ll%20length%20is%20just%20under%201%22.%20Complete%20specs%20-%20ple%61se%20click%20the%20%22more%20info%22%20icon.&stock_qty=249&img_name=ts190.gif&img_width=200&img_height=115&img_alt=BUEHLER 11601120100 12VDC 9200 24
X 18MM X 29MM FLAT MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%201%2F2%22%20long%20sh%61ft.%20No%20lo%61d%20speed%20is%205800rpm%20with%20current%20dr%61in%20of%20only%2085m%61.%20Click%20the%20%22more%20info%22%20ico
n%20for%20full%20specs%20%61nd%20dr%61wing.&stock_qty=237&img_name=ts192.gif&img_width=175&img_height=94&img_alt=BUEHLER 11602503800 12VDC 5800 24 X 18MM X 40MM FLAT MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20ge%61rmotor%20fe%61tures%20%61%20semi-fl%61t%20sh%61ft%20for%20e%61se%20of%20%61d%61pt%61tion%20to%20your%20specific%20requirments.%2080rpm%20no%20lo%61d%20speed%20with%20only%20140m%61%20current%20dr%61w.%20At%2031Ncm,%20speed%20i
s%2074rpm%20%61nd%20dr%61in%20is%20%61%20low%20500m%61.%20Click%20the%20%22more%20info%22%20icon%20for%20full%20specs%20%61nd%20dr%61wing.&stock_qty=33&img_name=ts195.gif&img_width=250&img_height=184&img_alt=BUEHLER 16104611500 80RPM
30 X 70 GEAR MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20speed%20is%20715rpm,%20current%20dr%61in%20is%200.75A%20%40%2013vdc.%20This%20is%20%61%20gre%61t%20motor%20for%20modellers,%20robotics,%20science%20projects,%20etc.%20Bi-di
rection%61l%20oper%61tion.%20Full%20dr%61wing%20%61nd%20specs%20-%20click%20the%20%22more%20info%22%20icon.&stock_qty=1214&img_name=ts201.gif&img_width=250&img_height=200&img_alt=BUEHLER 16104617801 13VDC 790RPM 30 X 61MM GEAR MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20c%61p%61ble%20of%20running%20on%2012
VDC%20to%2020%20VDC.%20Size%3A%201-3%2F8%22%20di%61%20x%202-3%2F8%22%20long.%20Du%61l%201%2F8%22%20di%61%20sh%61fts%20extend%203%2F8%22%20on%20one%20end%20%61nd%201%2F2%22%20on%20the%20other%20end.%20Numbers%2065780%20%61nd%20364322%20%61re%20st%61mped%20
on%20the%20c%61se.%203%2F16%22%20m%61le%20push%20on%20termin%61ls%20%61t%20the%20re%61r%20of%20motor.%20The%20front%20h%61s%20du%61l%20thre%61ded%20holes%20on%201%22%20centers.%20Bronze%20be%61rings.%20We%20h%61ve%20m%61tching%2020VDC%2F1.5A%20power%20sup
plies%20(MB678).%20When%20powered%20with%20this%20power%20supply%20motor%20c%61nnot%20be%20st%61lled%20by%20gr%61sping%20the%201%2F8%22%20di%61.%20sh%61ft.&stock_qty=176&img_name=mb679.gif&img_width=220&img_height=100&img_alt=JOHNSON
65780 20VDC MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%201.35%22%20long%20x%201%22%20x%200.86%22.%20Fl%61tted%20sh%61ft%20is%200.093%22%20di%61meter%20x%200.185%22%20long.%20T%61bs%20c%61n%20be%20wr%61pped%20%61nd%20soldered.&a
mp;stock_qty=0&img_name=mf381.gif&img_width=200&img_height=125&img_alt=3VDC GE MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20motor.%20Oper%61tes%20efficiently%20ob%206%20to%2018VDC.%20Pl%61stic%20b%61se%20with%20met%61l%20rotor.%20B%61s
e%20is%201.45%22%20di%61meter%20with%20two%20mounting%20e%61rs.%201.8%22%20mounting%20centers.%20Met%61l%20rotor%20is%201.48%22%20di%61meter.%20Over%61ll%20height%20of%20motor,%20excluding%20sh%61ft%20is%200.9.%22%200.12%22%20di%61meter%20sh%61ft%20x%203.
03%22%20long%20extends%20from%20both%20ends%20of%20motor.&stock_qty=0&img_name=me849.gif&img_width=150&img_height=150&img_alt=BRUSHLESS DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20di%61meter%20sh%61ft%20with%20pl%61ctic%20pulley.%20Solder-hole%20termin%61ls.%20Six%20thre%61ded%20mounting%20holes%20in%20f%61ce%20of%20motor.&stock_qt
y=0&img_name=me851.gif&img_width=150&img_height=145&img_alt=DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
.&stock_qty=3&img_name=me689.gif&img_width=125&img_height=104&img_alt=GEARBOX 2 IN 1,MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%20Over%61ll%20thickness%20of%20motors%20%61nd%20pl%61tform%20is%20%61pproxim%61tely%202%22.&stock_qty=0&img_name=me527.gif&img_width=200&i
mg_height=107&img_alt=
"Contact ted, the specialist for this product"){kind=small}
.%206mm%20(0.24%22%20di%61meter)%20x%201.5%22%20long%20fl%61tted%20sh%61ft.%20Motor%20c%61se%20i
s%202.93%22%20x%202.43%22%20x%203.45%22%20long%20with%20two%20t%61pped%20mounting%20holes%20in%20motor%20f%61ce.%206.5%22%20le%61ds.%20UL.&stock_qty=0&img_name=me236.gif&img_width=200&img_height=125&img_alt=CHWAN JHE # J-23089.
TEXA AC/DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20with%20DC%20motor-T%61ch%20-%20Motor%20specs%3A%2018vdc,%20
32mA.,%205280%20RPM%20no%20lo%61d%20-%20Torque%20const.%20285%20oz-In%20-%20M%61x%20cont.%20current%20952%20mA%20-%20M%61x%20cont.%20torque%20280%20oz-in%20-%20T%61ch%20output%3A%200.5%20vdc%2F1000%20RPM%20-%20Dimensions%3A%201.26%22L%20(32mm)%20di%61.%20
x%203%22L.,%200.512%22%20(13mm)%20Pilot,%20F%61ce%20mount%20(4)t%61pped%20holes%20on%203%2F4%22B.C.%20sh%61ft%200.158%22(4mm)di%61.%20x%203%2F4%22L%20POR&stock_qty=0&img_name=md998.gif&img_width=174&img_height=101&img_alt=MAXON
43.032.000-22.00-146 18VDC MOTOR
"Contact ted, the specialist for this product"){kind=small}
,%200.654%94%20long%20x%200.47%94%20x%200.39%94.%20Sh%61ft%20is%200.039%94(1mm)%20di%61me
ter%20x%200.13%94%20long.%20Solder-loop%20termin%61ls.&stock_qty=2576&img_name=mc425.gif&img_width=153&img_height=91&img_alt=MABUCHI FF-N20PN DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%20The%20sh%61ft%20%61lone%20in%203%2F8%22%20long%20x%201%2F16%22%20in%20di%61meter.%20The%20f%61ce%20of%20the%20motor%20h%61s%20two%20t%61pped%20screw%20holes%20(1%2F2%22%20%61p%61rt)%20for%20mounting.%20A%20fine%20qu%61lity%20little
%20motor.&stock_qty=19085&img_name=ts610.gif&img_width=150&img_height=94&img_alt=NISSEI DENKI 3 - 6 VOLT DC MINI MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%2015mm%20sh%61ft.%20No%20lo%61d%20speed%2013,600RPM%20%40%200.07A.&stock_qty=2000&img_name=tg691.gif&img_width=142&img_height=112&img_alt=MABUCHI FK-280PM-12300 12VDC MINI MOTORS
"Contact ted, the specialist for this product"){kind=small}
%20This%20model%20fe%61tures%20improved%20design%2
0to%20reduce%20extern%61l%20noise%20levels.%20H%61s%20%22wr%61p%20%61round%22%20m%61gnetic%20shield.%20High%20torque%20380.3%20gm-cm%20with%20%61%20st%61ll-torque%20figure%20of%201360%20gm-cm.%20An%20excellent%20find%20for%20the%20sm%61ll%20or%20medium%20
sized%20OEM%20who%20requires%20modest%20qu%61ntities%20of%20this%20qu%61lity%20product%20but%20c%61nnot%20s%61tisfy%20the%20m%61nuf%61cturer%27s%20dem%61nd%20for%20l%61rge%20qu%61ntity%20purch%61ses.%20Hundreds%20of%20%61pplic%61tion%20in%20Robotics,%20th
e%20RC%20field%20etc.%20(sh%61ft%20is%201%2F4%20fl%61t%20-%20st%61inless%20steel%201%2F8%22%20di%61).%20No%20lo%61d%20speed%20is%205500RPM%20-%20excellent%20for%20%22ge%61ring%20down%22%20to%20provide%20ultr%61%20high%20torque%20for%20l%61rger%20projects.
%201-7%2F16%22%20di%61%20x%202-5%2F8%22%20long.%20Fl%61tted%20sh%61ft%20is%201%2F2%22%20long.%203%2F16%22%20push%20on%20termin%61ls.%20Check%20the%20spec%20sheet%20by%20clicking%20the%20%22more%20info%22%20icon.%20For%20%61%20l%61rger%20photo,%20click%20o
n%20the%20photo%20%61bove.%20This%20unit%20fe%61tures%205%20pole%20construction%20for%20higher%20torque%20%61nd%20power%20efficiency,%20%61nisotropic%20m%61gnets,%20%61nd%20coil%20specs%20of%2055%20turns%20of%2032mm%20wire.%20We%20h%61ve%20tested%20this%2
0motor%20on%20one%20%61lk%61line%20pencell%20%61nd%20find%20th%61t%20it%20will%20deliver%20use%61ble%20torque%20%61t%20reduced%20RPM.%20Superb%20for%20school%20projects.%20%3Cbr%3E%20ATTENTION%3A%20IMPORTERS%20%2F%20EXPORTERS%20-%20%3CBR%3EC%61ll%20Ted%20
Duskes%20%61t%20800-341-6468%20(514%20739%208723)%20to%20negoti%61te%20l%61rge%20qu%61ntity%20pricing%20on%20this%20high%20qu%61lity,%20high%20power%20motor.%20(If%20you%20c%61n%20use%20the%20entire%20lot%20-%20c%61ll%20Ted%20%61t%20514-739-8723%20for%20%
61%20very%20speci%61l%20de%61l)&stock_qty=109788&img_name=md522.gif&img_width=200&img_height=148&img_alt=MABUCHI RS-555PH-3255 MABUCHI MOTOR
"Contact ted, the specialist for this product"){kind=small}
&desc=Over%207,000%20M%61buchi%20FK260SA-14280%20motors%20%61v%61il%61ble.%20Ov%61l%
20sh%61pe%20with%20dimensions%20of%3A%201-3%2F8%22%20long%20x%207%2F8%22%20wide%20%61md%201%2F16%22%20di%61.%20sh%61ft%20which%20is%209%2F16%22%20long.%20We%20believe%20th%61t%20this%20motor%20w%61s%20origin%61lly%20for%20use%20in%20Re%61rview%20mirrors,%
20electric%20sh%61vers,%20credit%20c%61rd%20re%61ders%20%61nd%20other%20low%20volt%61ge,%20low%20current%20%61pplic%61tions.%20Electric%61l%20specs%20for%20this%20motor,%20in%20JPG%20form%61t,%20%61re%20%61v%61il%61ble%20by%20clicking%20the%20MORE%20INFO%
20button.%20These%20units%20%61re%20br%61nd%20new,%20p%61cked%20200%20per%20c%61rton.&stock_qty=3&img_name=dc330.gif&img_width=200&img_height=162&img_alt=MABUCHI FK260SA-14280 MINI DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20top%20qu%61lity%20motor%20by%20Buehler.%20Mode
l%2011305707502.%201%2F8%22%20sh%61ft.%20St%61ll%20torque%20is%209Ncm%20%61nd%20st%61ll%20current%20is%203.3A.%20Click%20the%20more%20info%20icon%20for%20the%20complete%20dr%61wing%20%61nd%20spec%20sheet.&stock_qty=293&img_name=ts188.gif&img_w
idth=225&img_height=142&img_alt=BUEHLER 11305707502 12VDC 3600 RPM 33MM X 60MM DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20motor%20is%20ide%61l%20for%20%61%20multitude%20of%20robotic%20%61nd%20model%20%61pplic%61tions.%20Origin%61lly%20intended%20for%20use%20in%20line%61r%20%6
1ctu%61tor%20%61pplic%61tion.%20No%20lo%61d%20speed%20is%206000%20rpm%20%61nd%20st%61ll%20current%20is%20160A.%20Reversible.%20Click%20the%20more%20info%20icon%20for%20full%20specs%20%61nd%20dr%61wing.%20Click%20photo%20for%20l%61rger%20im%61ge.%20The%20s
lotted%20output%20sh%61ft%20is%20%BC%22%20di%61meter%20x%205%2F8%22%20long.%20The%20motor%20weighs%206%20pounds.%20This%20is%20%61n%20exception%61l%20motor.%20As%20%61%20gener%61tor,%20it%20develops%20%61pprox%202%20volts%20per%201000%20rpm.&stock_qty
=886&img_name=ts189.gif&img_width=270&img_height=159&img_alt=BUEHLER 11307520400 12VDC 6000 RPM 76MM X 122MM DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20Gre%61t%20sol%61r%20motor.%20Will%20run%20one%20month%20on%20%61%20single%20%22D%22%20cell!%20Size%3A%201-1%2F4%22%20di%61%20x%209%2F16%22,%20with%20%61%20sh%61ft%20th%61t%20is%201%
2F16%22%20di%61.%20x%203%2F8%22%20long.%20Bronze%20self-%61ligning%20be%61rings.%203%20pole%20construction,%20st%61mped,%20forked%20met%61llic%20brushes,%20ring%20isotropic%20m%61gnets,%20%61nd%20coil%20specs%20of%20750%20turns%20of%2010mm%20wire.%205%22%
20long%20bl%61ck%20%61nd%20white%20wire%20le%61ds%20soldered%20to%20solder%20termin%61ls.%20P%61cked%20250%20pieces%20per%20c%61rton.%20Mounting%20hole%20sp%61cing%20is%2026mm.&stock_qty=4114&img_name=te162.gif&img_width=86&img_height=86&a
mp;img_alt=MABUCHI RF-500TA-10750 MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20%61long%20with%20%61%20CSA%2FUL%20%61pproved%20110VAC%2F60Hz%20plug-in%20w%61ll%20power%20supply.%20The%20power%20supply%20delivers%2012VDC%20%61t%20800MA.%20The%20power%20supply%20h%61s%20
%61%2010%20foot%20output%20cord%20with%20%61n%20inline%20on%2Foff%20switch.%20Connect%20them%20up%20%61nd%20you%20h%61ve%20%61%20powerful%20motor%20with%20%61%20hundred%20%61pplic%61tions.&stock_qty=0&img_name=mg280.gif&img_width=270&img_h
eight=157&img_alt=MOTOR/WALL TRANSFORMER KIT
"Contact ted, the specialist for this product"){kind=small}
%20%61nd%20instructions%20to%20bui
ld%20%61%20re%61l%20live,%20working%20motor.%20An%20introduction%20to%20the%20workings%20of%20the%20DC%20electric%20motor.%20A%20cre%61tive%20experience%20th%61t%20no%20junior%20experimentor%20will%20ever%20forget.%20%22W%61tch%20it%20come%20to%20life%22%
20A%20number%20of%20experiments%20%61re%20included%20in%20the%20instructions,%20which%20the%20te%61cher%20c%61n%20use%20to%20get%20young%20minds%20thinking.%20Sn%61ps%20together.%20No%20soldering%20required.%20Oper%61tes%20on%20one%20AA%20b%61ttery.%20Con
t%61ins%20%61ll%20you%20see%20here.&stock_qty=0&img_name=mg252.png&img_width=270&img_height=252&img_alt=DC MOTOR KIT
"Contact ted, the specialist for this product"){kind=small}
%20with%20%61%20current%20dr%61in%20of%20only%201.285%20A.%20Click%20the%20%22more%20info%22%20icon%20for%20full%20specs%20
%61nd%20dr%61wing.&stock_qty=233&img_name=ts193.gif&img_width=270&img_height=150&img_alt=BUEHLER 16103110806 25VDC 315RPM 40 X 127 GEAR MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%20Ge%61r%20r%61tio%20is%2030%3A1.%20Bi-direction%61l%20oper%61tion.%20At%2050Ncm%20torque,%20speed%20is%20180rpm%20%61nd%20current%20dr%61in%20830m%61.%20Full%20specs%20%61nd%20dr%61wing%20%61v%61il%61ble%20-%20cl
ick%20the%20%22more%20info%22%20icon.&stock_qty=19&img_name=ts196.gif&img_width=270&img_height=143&img_alt=BUEHLER 16104612500 24VDC 215RPM 30 X 87 GEAR MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20%61nd%20bi-direction%61l%20oper%61tion.%20At%20%61%20lo%61d%20of%2020Ncm,%20speed%20is%20106rpm%20%61nd%20current%20d
r%61in%20is%20650m%61.%20Full%20dr%61wing%20%61nd%20specs%20-%20click%20the%20%22more%20info%22%20icon.&stock_qty=541&img_name=ts198.gif&img_width=200&img_height=87&img_alt=BUEHLER 16104615600 12VDC 162RPM 30 X 68 GEAR MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20speed%20is%20715rpm,%20current%20dr%61in%20is%200.75A%20%40%2013vdc.%20Bi-direction%61l%20oper%61tion.%20This%20is%20%61%20gre%61t%20motor%20for%20modellers,%20robotics,%20
science%20projects,%20etc.%20Full%20dr%61wing%20%61nd%20specs%20-%20click%20the%20%22more%20info%22%20icon.&stock_qty=434&img_name=ts200.gif&img_width=250&img_height=194&img_alt=BUEHLER 16104617800 13VDC 790RPM 30 X 61MM GEAR MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20mid%20sized%20motor%20(click%20%22more%20info%22%20icon%20for%20dr%61wing%20-%20note%20th%61t%20double%20fl%61tted%20sh%61ft%20is%20%61s%20per%20photo%20%61bove).%20The%20DC%20connection%20termin%61ls%20on%20this%20model%20h%61ve%20been%20desi
gned%20to%20%61llow%20for%20soldering%20%61nd%20mounting%20purposes%20-%20they%20%61re%20fl%61t%20%61nd%20p%61r%61llel%20to%20the%20f%61ce%20of%20the%20motor.%20Ultr%61-unique,%20this%20model%20w%61s%20designed%20for%20%61%20high%20duty%20cycle%20point%20
of%20s%61le%20device.&stock_qty=395&img_name=ts125.gif&img_width=185&img_height=175&img_alt=
"Contact ted, the specialist for this product"){kind=small}
%20mid%20sized%20motor%20(click%20%22more%20info%22%20icon%20for%20dr%61wing%20-%20note%20th%61t%20double%20fl%61tted%20sh%61ft%20is%20%61s%20per%20photo%20%61bove).%20The%20dc%20connection%20termin%61ls%20on%20this%20model%20h%61ve%20been%20desi
gned%20to%20%61llow%20for%20soldering%20%61nd%20mounting%20purposes%20-%20they%20%61re%20fl%61t%20%61nd%20p%61r%61llel%20to%20the%20f%61ce%20of%20the%20motor.%20Ultr%61-unique,%20this%20model%20w%61s%20designed%20for%20%61%20high%20duty%20cycle%20point%20
of%20s%61le%20device.&stock_qty=393&img_name=ts125.gif&img_width=185&img_height=175&img_alt=
"Contact ted, the specialist for this product"){kind=small}
%20Gre%61t%20sol%61r%20motor.%20Will%20run%20one%20month%20on%20%61%20single%20%22D%22%20cell!%20Size%3A%201-1%2
F4%22%20di%61%20x%209%2F16%22,%20with%20%61%20sh%61ft%20th%61t%20is%201%2F16%22%20di%61.%20x%203%2F8%22%20long.%20Mounting%20holes%20%61re%2024mm%20sp%61cing%20(which%20is%20different%20th%61n%20on%20the%20spec%20sheet%20-%20ple%61se%20note).%20Bronze%20s
elf-%61ligning%20be%61rings.%203%20pole%20construction,%20st%61mped,%20forked%20met%61llic%20brushes,%20ring%20isotropic%20m%61gnets,%20%61nd%20coil%20specs%20of%20750%20turns%20of%2010mm%20wire.%205%22%20long%20bl%61ck%20%61nd%20white%20wire%20le%61ds%20
soldered%20to%20solder%20termin%61ls.%20P%61cked%20250%20pieces%20per%20c%61rton.%20Click%20the%20%22more%20info%22%20icon%20for%20the%20full%20spec%20sheet.&stock_qty=36&img_name=ts001.gif&img_width=81&img_height=86&img_alt=MABUCHI
RF-500TB-10750 MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20on%20sh%61ft%20side%20of%20motor,%200.63%22%20mounting%20cente
rs.%20Solder%20termin%61ls%20prepped%20with%205%22%20le%61ds.&stock_qty=0&img_name=me424.gif&img_width=200&img_height=116&img_alt=MABUCHI RS-365SH DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20x%201.05%22%20(26.9mm)%20motor%20with%20%61%20short%202.0mm%20(0.08%22%20)%20di%61.%20sh%61ft%20x%204mm%20long.%20We%20do%20not%20h%61ve%20the%20full%20specs%20on%20this%20motor.%20We%20do
%20know%20th%61t%20this%20unit%20fe%61tures%20c%61rbon%20brushes,%203%20pole%20construction,%20segmented%20isotropic%20m%61gnets%20%61nd%20h%61s%20coil%20specs%20of%20281%20turns%20of%2025mm%20di%61%20wire.%20.%20Origin%61lly%20used%20in%20%61utomotive%20
%61pplic%61tions.&stock_qty=11407&img_name=ts025.gif&img_width=100&img_height=90&img_alt=MABUCHI RC-260RA-25281A 12VDC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%207730.%20
The%20motor%20is%201-1%2F2%22%20di%61.%20x%201-3%2F8%22%20long.%20The%201%2F8%22%20di%61.%20sh%61ft%20is%201%2F2%22%20long%20%61nd%20be%61rs%201%2F2%22%20di%61.%20br%61ss%20pulley.%20Two%20rubber%20vibr%61tion%20d%61mping%20g%61skets%20suggests%20th%61t%2
0this%20could%20be%20%61%2012VDC%20c%61ssette%20drive%20motor.%202%203%22%20wire%20le%61ds%20%61re%20stripped%20%61nd%20tinned.%20The%20motor%20is%20enc%61sed%20in%20%61%20%22slip-on%22%20fl%61nged%20mounting%20c%61se.%20Close%20inspection%20suggests%20it
%20w%61s%20m%61de%20in%20J%61p%61n.%2010,000%20%61v%61il%61ble.%20POR&stock_qty=1&img_name=sa083.gif&img_width=100&img_height=110&img_alt=59C43994C01-C DC MOTOR
"Contact ted, the specialist for this product"){kind=small}
%20x%201.05%22%20(26.9mm)%20motor%20with%202.0mm%20(0.08%22)%20di%61meter,%2010mm%20(3%2F8%22)%20long%20sh%61ft.%20We%20do%20know%20th%61t%20this%20unit%20fe%61tures%20c%61rbon%20brushes,%203%20pole%
20construction,%20segmented%20isotropic%20m%61gnets%20%61nd%20h%61s%20coil%20specs%20of%20255%20turns%20of%2025mm%20di%61%20wire.%20Origin%61lly%20used%20in%20%61utomotive%20%61pplic%61tions.&stock_qty=1819&img_name=ts024.gif&img_width=125&
;img_height=98&img_alt=MABUCHI RC-260RA-25525A 12VDC MOTOR
"Contact ted, the specialist for this product"){kind=small}
.%20%3CA%20HREF%3D%20%22http%3A%2F%2Fwww.surplustr%61ders.net%2Fspecs%2Fbd009.gif%22%20%3E%20Full%20dr%61wing%20%61v%61il%61ble%20-%20click%20here!%20%3C%2FA%3E.%20This%20is%20%61n%20excellent%20opportunity%20for%
20OEMs%20to%20get%20%61%20gre%61t%20de%61l%20on%20%61%20very%20vers%61tile%20motor.%20Cont%61ct%20us%20tod%61y.%20S%61mple%20%61v%61il%61ble%20to%20qu%61lified%20buyers.%20This%20unit%20is%20%61v%61il%61ble%20for%20l%61rge%20volume%20s%61les%20only.&s
tock_qty=4&img_name=&img_width=0&img_height=0&img_alt=
"Contact ted, the specialist for this product"){kind=small}
